Understanding the catalytic role of flexible chiral δ-amino alcohols: the 1-(2-aminoethyl)norbornan-2-ol model

An empiric first approach to the knowledge about the structural factors influencing the catalytic behavior of conformationally flexible δ-amino-alcohol-based ligands, for the enantioselective addition of dialkylzincs to prochiral carbonyl groups, has been applied using the 1-(2-aminoethyl)norbornan-2-ol moiety as the model chiral system, and the asymmetrically catalyzed addition of diethylzinc to benzaldehyde as the test reaction. For this purpose, a selected small library of seven norbornane-based chiral ligands, bearing well-defined structural variations to allow a comparative study, that is, variation of the relative configuration and steric hindrance at the C(2), C(3) and/or C(7) norbornane positions, has been synthesized and probed in the mentioned test reaction. The experimental results obtained have been rationalized empirically using diastereomeric Noyori-like transition states, demonstrating that the conformational flexibility of the δ-amino-alcohol ligands, contrary to the more studied and rigid β-amino-alcohols, plays a crucial role on the catalytic behavior of such ligands (stereochemical sense and degree of the stereodifferentiation in the asymmetric process), which makes such structural factors, important for the improved design of new related chiral catalysts. In this sense, a robust crude empirical model for the prediction of the catalytic behavior of such δ-amino-alcohol-based ligands is proposed.     

Room-temperature synthesis and conductivity of the pyrochlore type Dy2(Ti1−yZry)2O7 (0?y?1) solid solution

Different compositions in a solid solution of general formula Dy₂(Ti_1−yZr_y)₂O₇, showing high oxygen ion conductivity, have been successfully prepared at room temperature via mechanochemical synthesis. Stoichiometric mixtures of the constituent oxides were dry milled together in a planetary ball mill by using zirconia vials and balls. Chemical changes in the powder mixtures as a function of composition and milling time were followed by X-ray diffraction and revealed that, in all cases and after milling for 19 h, the powder mixtures consisted of a single phase. Electrical properties were measured on sintered pellets as a function of frequency, temperature and zirconium content, revealing an increase in conductivity of more than one order of magnitude for y?0.4, which, as observed in the similar Y₂(Ti_1−yZr_y)₂O₇, has been related with the onset of disordering of the anion sublattice. Despite increasing structural disorder with increasing Zr content, conductivity remains almost constant for y>0.6, reaching a maximum value of ∼5×10⁻³ for Dy₂Zr₂O₇ at 900 °C.     

Darstellung und Eigenschaften von Chromtricarbonyl-Komplexen strukturisomerer Borazin-Derivate

The new hexaalkylborazine chromium tricarbonyls (n-Pr)₃B₃N₃Me₃Cr(CO)₃ (V), Me₃B₃N₃(n-Pr)₃Cr(CO)₃ (VI), (i-Pr)₃B₃N₃Me₃Cr(CO)₃ (VII) and Me₃B₃N₃(i-Pr)₃Cr(CO)₃ (VIII) have been prepared from fac-Cr(CO)₃(MeCN)₃ and the corresponding borazine in dioxane or without solvent. They are much more labile than the isomeric complex Et₃B₃N₃Et₃Cr(CO)₃ (IV) which can be readily obtained from Et₃B₃N₃Me₃Cr(CO)₃ and Et₃B₃N₃Et₃ by ring ligand exchange. The NMR., IR., UV. and Mass spectroscopic data of the complexes IV–VIII will be briefly discussed. The preparation of the borazine derivatives (n-Pr)₃B₃N₃Me₃ (IX) and Me₃B₃N₃(n-Pr)₃ (X) is also reported.     

Porous metal–organic alloys based on soluble coordination cages

Diverse strategies for the preparation of mixed-metal three-dimensional porous solids abound, although many of them lend themselves only moderate levels of tunability. Herein, we report the design and synthesis of surface functionalized permanently microporous coordination cages and their use in the isolation of mixed metal solids. Judicious alkoxide-based ligand functionalization was utilized to tune the solubility of starting copper(ii)-based cages and their resulting compatibility with the mixed-cage approach described here. We further prepared a family of isostructural molybdenum(ii) cages for a subset of the ligands. The preparation of mixed-metal cage solids proceeds under facile conditions where solutions of parent cages are mixed and product phases isolated. A suite of spectroscopic and characterization tools confirm the starting cages are intact in the amorphous product. Finally, we show that utilization of precise ligand functional groups can be used to prepare mixed cage solids that can be easily and cleanly separated into their constituent components through simple solvent washing or solvent extraction techniques.

Surface-functionalized porous coordination cages can be used to create homogeneous mixed-cage alloys with high levels of tunability and processability.     

O2 interaction and reactivity on a model hydroxylated rutile(110) surface

Recently several theoretical studies have examined oxygen adsorption on the clean, reduced TiO2(110) surface. However the photocatalytic behavior of TiO2 and the scavenging ability of oxygen are known to be influenced by the presence of surface hydroxyls. In this paper the chemistry of O2 on the hydroxylated TiO2 surface is investigated by means of first-principles total energy calculations and molecular dynamics (MD) simulations. The MD trajectories show a direct, spontaneous reaction between O2 and the surface hydroxyls, thus supporting the experimental hypothesis that the reaction does not necessarily pass through a chemisorbed O2 state. Following this reaction, the most stable chemisorbed intermediates are found to be peroxide species HO2 and H2O2. Although these intermediates are very stable on the short time scale of MD simulations, the energetics suggests that their further transformation is connected to a new 300 K feature observed in the experimental water temperature programmed desorption (TPD) spectrum. The participation of two less stable intermediate states, involving terminal hydroxyls and/or chemisorbed water plus oxygen adatoms, to the desorption process, is not supported by the total energy calculations. Analysis of the projected density of states, however, suggests the possibility that these intermediates have a role in completing the surface oxidation immediately before desorption.     

Mass spectrometry of heterocyclic compounds—III. Electron-impact-induced fragmentation of 1,2-benzisothiazole and some 3-substituted derivatives

The mass spectra of fifteen 1,2-benzisothiazoles are reported; their fragmentation patterns have been investigated by labelling experiments, high resolution mass measurements and defocused metastable ion detection. The parent compound of the series, 1,2-benzisothiazole, eliminates HCN after partial inter-ring hydrogen scrambling. The extent of scrambling has been determined for normal daughter ions produced at different electron beam energies and also for metastable daughter ions, and is compared with the data reported for benzothiazole. Some 3-substituted derivatives show unusual fragmentation patterns. The mechanisms of these processes are under further investigation.     

Asymmetric synthesis by chiral ruthenium complexes : VI. Enantiomer-discrimination in the hydrogen transfer from racemic alcohols to prochiral ketones in the presence of H4Ru4(CO)8[(−)-diop]2

Hydrogen transfer from racemic alcohols to prochiral ketones in the presence of H₄Ru₄(CO)₈[(?)-DIOP]₂ has been examined. The enantiomer-discrimination is influenced by the structure of the reactants, temperature and the excess of phosphine present.     

Total synthesis of (±)-cyclooroidin

The first total synthesis of (±)-cyclooroidin, a member of the pyrrole-imidazole alkaloid family recently isolated from the sponge Agelas oroides in optically pure form, is described. The synthesis was achieved in nine linear steps, with an overall yield of 10%. Key step was a Wolff bromoketone synthesis performed on the intermediate longamide B.     

Microwave-assisted synthesis of bipyrazolyls and pyrazolyl-substituted pyrimidines

We describe the preparation of 1,4′-bipyrazolyls and 4-pyrazolylpyrimidines by the reaction of 2-pyrazolyl-3-dimethylamino acrylate and acrylonitrile with double nucleophilic reagents such as hydrazines, urea and guanidine. Reactions were performed under microwave irradiation in 5-60 min. This is a useful procedure for the preparation of valuable compounds with applications in medicinal and coordination chemistry.     

Interactions of diethylenetriaminepentaacetic acid (dtpa) and triethylenetetraaminehexaacetic acid (ttha) with major components of natural waters

The binding ability of diethylene triamine pentaacetate (dtpa(5-)) and triethylene tetraamine hexaacetate (ttha(6-)) ligands towards major components, H(+), Na(+), Mg(2+) and Ca(2+), of natural waters was studied in both single and mixed ionic media at different ionic strengths and at T=25 degrees C. Some measurements, performed in Mg(2+)-Ca(2+) mixtures, allowed us to find the formation of new mixed species MgCa(dtpa), MgCa(ttha) and MgCaH(ttha), here reported for the first time. All the complexes formed in the various systems were characterized in terms of both stoichiometry and stability, and an attempt was made to find general rules for the stability of mixed metal complexes in comparison with that of simple species. To obtain quantitative information on the complexing ability of dtpa and ttha in seawater, measurements have been carried out in artificial seawater ionic medium (Na(+), K(+), Ca(2+), Mg(2+), Cl(-) and SO(4)(2-)). Calculations, performed by considering the salt mixture as single salt BA, allowed us to find some quite stable B(i)H(j)L species. Under the natural seawater conditions [S(salinity)=35], we found for the most important species logbeta( B(dtpa))=9.64 and. Literature data comparison is also reported.