The Thermal Stability of Ciprofloxacin Complexes with Magnesium(II), Zinc(II) and Cobalt(II)

The thermal behaviour of Mg(II), Zn(II) and Co(II) compounds of ciprofloxacin was studied by thermogravimetry (TG) and differential thermal analysis (DTA) in order to determine or to confirm some structural characteristics of substances. The complexes decompose in two steps: dehydration and pyrolytic decomposition of the anhydrous complexes to form metal oxide or metal fluoride. The dehydration process of one magnesium(II) compound takes place in two steps suggesting a marked difference in the bonding of water molecules. The different bonding mode of the ciprofloxacin molecules in both magnesium compounds leads to different residues of the thermal decompositions. This revised version was published online in August 2006 with corrections to the Cover Date.     

Transition Metal Complexes with Pyrazole-based Ligands. Part 12. Characterisation and thermal decomposition of CuCl2 complexes with di- and trisubstituted pyrazoles

The synthesis of copper(II) chloride complexes with 3,5-dimethylpyrazole, 1-carboxamidine-3,5-dimethylpyrazole, 5-amino-4-carboxamide-1-phenylpyrazole and 4-acetyl-3-amino-5-methylpyrazole is described. The compounds are characterized by elemental analysis, FT-IR spectroscopy, thermal methods, magnetic moment and molar conductivity measurements. Thermal decomposition of the dichloro-(3,5-dimethylpyrazole)-copper(II) complex results in an unstable intermediate with a stochiometric composition. The decomposition of the other compounds is continuous. This revised version was published online in August 2006 with corrections to the Cover Date.     

An Alternative Demonstration of Chemical Waves: A Video Clip of a One-Dimensional Wave in the Iodate–Arsenite System

A chemical wave was initiated in a system (glass tube or graduated cylinder) containing a water solution of potassium iodate, potassium hydrogen sulfate, starch, and an excess of potassium arsenite. A large number of photos (329) were taken with a digital camera (one snapshot every 30 seconds). These photos were linked to give a unique video clip. This video clip may be used as a time-saving alternative to the classical demonstration. Similar clips may be made for other long-lasting processes.     

Coordination compounds of nickel with trithiocyanuric acid. Part IV. Structure of [Ni(pmdien)(ttcH)] (pmdien = N,N,N′,N′,N′′-pentamethyldiethylenetriamine,ttcH3 = trithiocyanuric acid)

Ni^II mixed-ligand complexes of compositions [Ni(pmdien)(ttcH)] (1), [Ni(baphen)₂(ttcH)] · 4H₂O (2), [Ni-(dpa)(ttcH)(H₂O)] (3), [Ni(cyclam)(ttcH)] · 2H₂O (4), [Ni(hexaa)](ttcH) (5) and [Ni(hexab)(ttcH)] · 2H₂O (6), (baphen = 4,7-diphenyl-1,10-phenanthroline, dpa = 2,2-dipyridylamine, cyclam = 1,4,8,11-tetraazacyclotetradecane, hexaa = 1,3,6,9,11,14-hexaazatricyclo[12.2.1.1^6,9]-octadecane, hexab = 1,8-dimethyl-1,3,6,8,10,13-hexaazacyclotetradecane) have been prepared and characterized by means of i.r., u.v.–vis. spectroscopies and magnetochemical measurements. The redox properties of the complexes were studied by cyclic voltammetry. The crystal and molecular structure of [Ni(pmdien)(ttcH)] was determined. The nickel atom is penta-coordinated by three N atoms of pmdien, and by S and N atoms of trithiocyanurate(2–) anion.     

IR spectroelectrochemical studies of Fe2V4O13, FeVO4 and InVO4 thin films obtained via sol-gel synthesis

In this paper we generalize the IR spectroscopic properties of M³⁺VO₄ (M=Fe, In) orthovanadate and Fe₂V₄O₁₃ films. The films were prepared using the sol-gel synthesis route from M³⁺ nitrates and vanadium oxoisopropoxide. The vibrational bands in the IR absorbance spectra of the films are classified in terms of terminal V-O stretching (1050–880 cm^–1), bridging V-O^...Fe and V^...O^...Fe stretching (880–550 cm^–1), mixed V-O-V deformations and Fe-O stretching (<550 cm^–1) modes. Ex situ IR spectra of films were measured after consecutive charging/discharging to various intercalation coefficients x and correlated to the current peaks in the cyclic voltammetry curves measured in 1 M LiClO₄/propylene carbonate electrolyte. We classified the ex situ IR spectra of charged/discharged films according to their vibrational band changes. The results reveal that, for small values of the intercalation coefficient, crystalline FeVO₄, InVO₄ and Fe₂V₄O₁₃ films exhibit a simultaneous decrease in the intensity of all IR bands while the band frequencies remain unaffected. For the higher intercalation levels, IR mode frequencies are shifted, signaling the presence of reduced vanadium. Further charging leads to an amorphization of the film structure, which was established from the similarity of the IR spectra of charged films with those of amorphous films prepared at lower annealing temperatures. The results confirm that ex situ IR spectroelectrochemical measurement is an effective way to assess the structural changes in films with different levels of intercalation. Electronic Publication     

Heat Capacities of Hydroxy and Aminoderivatives of Benzene

Heat capacities in the liquid phase C ^l of methylbenzeneamines and heat capacities in the solid phase C ^s of benzenediols and of 4-methylbenzeneamine were measured by commercial Setaram heat conduction and power compensated calorimeters. Results obtained cover the following temperature range (depending on the compound and state of aggregation): 2-methylbenzeneamine 313 to 371 K, 3-methylbenzeneamine 263 to 371 K, 4-methylbenzeneamine 133 to 353 K, 1,2-benzenediol 153 to 353 K, 1,3-benzenediol 173 to 353 K, 1,4-benzenediol 133 to 403 K. The heat capacity data obtained in this work were merged with experimental data from literature, critically assessed and sets of recommended data were developed by correlating selected data as a function of temperature. This revised version was published online in August 2006 with corrections to the Cover Date.     

Study of the Lipophilicity and Retention Behavior of Some s-Triazine Derivatives on Aminoplast and Cellulose

JPC – Journal of Planar Chromatography – Modern TLC - The chromatographic behavior of four groups of s-triazine derivatives (15 compounds) has been studied on aminoplast and cellulose...     

A decanuclear oxomolybdenum(V,VI) cluster with 4-isopropylpyridine

The title centrosymmetric cluster octakis(4-iso­propyl­pyridine-N)-di-μ₄-oxo-hexa-μ₃-oxo-octa-μ₂-oxo-deca­oxo­octa­molyb­denum(V)­dimolybdenum(VI), [Mo₁₀O₂₆(C₈H₁₁N)₈], consists of ten Mo atoms connected together by bridging oxo groups. Pentavalent Mo atoms are linked into four Mo₂^V pairs by metal–metal single bonds with lengths of 2.5637 (6) and 2.6132 (6) Å.     

Microstructural properties of sintered Al–Cu–Mg–Sn alloys

A non-commercial Al4Cu0.5Mg alloy has been used for investigating the effects of the elemental Sn additions. Uniaxial die compaction response of the alloys in terms of green density was examined, and the results showed that Sn addition has no effect when compacting conducted under high pressures. In total, 93–95% green density was achieved with an applied pressure of 400 MPa. Thermal events occurring during the sintering of the emerging alloys were studied by using differential scanning calorimetry (DSC). First thermal event on the DSC analysis of the Al4Cu0.5Mg1Sn alloy is the melting of elemental Sn, whereas for Al4Cu0.5Mg alloy, it is the formation of Al–Mg liquid nearly at 450 °C. Also it is clearly seen on the DSC analysis that Sn addition led to an increase in the formation enthalpy of Al–Mg liquid phase. High Sn content and high sintering temperature (620 °C), therefore high liquid-phase content, caused decrease on the mechanical properties due to thick intergranular phases and grain coarsening. Highest transverse rupture strength and hardness values were obtained from Al4Cu0.5Mg0.1Sn alloy sintered at 600 °C and measured as 390 MPa and 73 HB, respectively.     

Effect of Cold Atmospheric Pressure Plasma on Maize Seeds: Enhancement of Seedlings Growth and Surface Microorganisms Inactivation

Cold atmospheric pressure ambient air plasma generated by Diffuse Coplanar Surface Barrier Discharge (DCSBD) was investigated for inhibition of native microbiota and potentially dangerous pathogens (Aspergillus flavus, Alternaria alternata and Fusarium culmorum) on the maize surface. Moreover, the improvement of germination and growth parameters of maize seeds was evaluated. Maize (Zea mays L.; cv. Ronaldinio), one of the most important cultivated crops worldwide, was selected as the research material. Electrical measurements confirmed the high volume power density (80 W cm^?3) of DCSBD plasma. Non-equilibrium plasma state evaluated using optical emission spectroscopy showed values of vibrational and rotational temperature (2700?±?300) K and (370?±?75) K, respectively. Changes on the plasma treated seeds surface were studied by water contact angle measurement, scanning electron microscope analysis and Fourier transform infrared spectroscopy. A complete devitalisation of native microbiota on the surface of seeds was observed after a short treatment time of 60 s (bacteria) and 180 s (filamentous fungi). The plasma treatment efficiency of artificially contaminated maize seeds was estimated as a reduction of 3.79 log (CFU/g) in F. culmorum after a 60-s plasma treatment, 4.21 log (CFU/g) in A. flavus and 3.22 log (CFU/g) in A. alternata after a 300-s plasma treatment. Moreover, the obtained results show an increase in wettability, resulting in a better water uptake and in an enhancement of growth parameters. The investigated DCSBD plasma source provides significant technical advantages and application potential for seed surface finishing without the use of hazardous chemicals.