Temperature dissipation measurements in a fully developed turbulent channel flow

All three derivatives of the temperature fluctuation in a fully developed turbulent channel flow have been measured using a pair of parallel cold wires with fixed separations in either the x (streamwise), y (normal to the wall) or z (spanwise) direction. At several locations, measurements were also made, each for a range of y separations between the wires. These latter measurements were important for establishing a suitable method of correcting the data for the effect of wire separation, thus allowing the fixed separation data to be corrected. In the near-wall region, the corrected temperature dissipation is in good agreement with results from direct numerical simulations. The time scale ratio deduced from measurements and simulations agrees well with the theoretical wall value.     

Organopolysiloxanes as Chemically Sensitive Coatings for Optical Fibers

Various types of UV-curable organically modified siloxanes have been synthesized by the sol-gel method with the aim of fabricating chemically sensitive coatings for silica optical fibers. The refractive index of the coating material can be tailored in the range from 1.46 to 1.56 and sensitivity towards CO2 is achieved by incorporation of amino groups. The interaction of the cured layers with CO2 or with hydrocarbons has been studied in immersion experiments. Both the reaction of CO2 with incorporated amino groups and the penetration of hydrocarbons into the layer induce changes of the light absorption coefficient and the refractive index of the coating which are detected by measuring the output light intensity from the fiber.     

FIA-fluorimetric determination of adrenaline in pharmaceutical formulations by oxidation with molecular oxygen

The fluorimetric determination of adrenaline is carried out in a continuous-flow assembly and by means of the molecular dissolved oxygen. The sample solution merges with an NaOH stream, then the resulting mixture is heated at 73 °C and led to the flow-cell of the fluorimeter. The flow-assembly is very simple and the procedure is quick (107 samples h^–1) reproducible (R.S.D. 0.6%), selective and suitable to be applied to determination of adrenaline in formulations. Calibrations graph are linear over the ranges 0.05–15 and 20–40 mgl^–1.     

Crystal,Molecular, and Electronic Structure of 1-Acetyl-indoline and Derivatives

The crystal and molecular structures of the following molecules have been determined: 1-acetyl-indoline, 1-acetyl-5-nitro-indoline, l-acetyl-5-nitro-7-bromo-indoline, 1-acetyl-5-bromo-7-nitroindoline, and l-acetyl-5-bromo-7-nitro-indol. Molecular orbital calculations are performed for these compounds and two related species.     

Preconcentration of cadmium, cobalt, copper, nickel and zinc by solvent extraction into methyl isobutyl ketone with 1,5-bis [1-(2-pyridyl) ethylidene] thiocarbonohydrazide and 1,5-bis [phenyl-(2-pyridyl) methylene] thiocarbonohydrazide

The synthesis, physicochemical properties and interactions of two new thiocarbohydrazones, namely 1,5-bis[1-(2-pyridyl) ethylidene] thiocarbonohydrazide (APTH) and 1,5-bis[phenyl-(2-pyridyl) methylene] thiocarbonohydrazide (BPTH) have been studied as well as the use of both compounds as extracting reagents. These thiocarbohydrazones form yellow complexes with bivalent metal ions, and these are extractable into methyl isobutyl ketone. Conditions for quantitative extraction of Cd(II), Co(II), Cu(II), Ni(II) and Zn(II) are established from a critical study of the effect of pH, shaking time, reagent concentration in the organic phase, ionic strength and volume ratio of aqueous to organic phase.     

Effect of the carbon burn-off on the performance of activated carbon as a support for hydrogenation catalysts

The hydrogenation activity of Pt supported on activated carbon would depend on both the Pt dispersity (which can be modified by a partial carbon burn-off in air) and the impurities concentration.     

INTERMEDIATES IN THE ROOM TEMPERATURE FLASH PHOTOLYSIS AND LOW TEMPERATURE PHOTOLYSIS OF PURINE SOLUTIONS

The flash photolysis of purine in acetonitrile and in water at different pH was studied. The transients produced on flash excitation of degassed aqueous solutions have been identified as the triplet excited state, the hydrated electron, a purine radical cation and radical anion on the basis of quenching experiments and comparison to transients observed in low temperature photolysis.     

Why copper is intrinsically more selective than silver in alkene epoxidation: ethylene oxidation on Cu(111) versus Ag(111)

The heterogeneously catalyzed epoxidation of alkenes is experimentally challenging, theoretically interesting, and technologically important. Although large-scale ethylene epoxidation is universally carried out with Ag catalysts, recent laboratory studies on single crystal surfaces show that Cu is intrinsically much more selective than Ag in the epoxidation of a variety of terminal alkenes. The reasons for this striking difference between Ag and Cu have been investigated by means of density functional theory. It is found that the fundamental cause is the inversion in the ordering of activation barriers for the competing pathways to epoxide formation versus acetaldehyde formation (the latter being the first step on the route to combustion). On Cu, epoxide formation is less activated than aldehyde formation; the opposite is true on Ag. This behavior is associated with a late transition state to epoxidation on Cu (i.e., product-like) compared to an early (reactant-like) transition state to epoxidation on Ag.     

Di-2-pyridyl ketone 2-furoylhydrazone as a reagent for the fluorimetric determination of low concentrations of aluminium

The synthesis and properties of di-2-pyridyl ketone 2-furoylhydrazone as an analytical reagent are described. A rapid procedure for the fluorimetric determination of aluminium at the 10-100 ng ml level, at pH 6.1-6.5 (lambda(exc) 395 nm, lambda(em) 465 nm) has been established. Interferences have been evaluated, and the procedure has been applied satisfactorily to determination of aluminium in sea-water.