Quantification of retinoid concentrations in human serum and brain tumor tissues

Retinoic acid signaling is essential for central nervous system (CNS) differentiation and appears to be impaired in tumors. Thus far, there are no established methods to quantify relevant retinoids (all-trans-retinoic acid, 9-cis-retinoic acid, 13-cis retinoic acid, and retinol) in human brain tumors. We developed a single step extraction and quantification procedure for polar and apolar retinoids in normal tissue, lipid-rich brain tumor tissues, and serum. This quantification procedure is based on high performance liquid chromatography (HPLC) with diode-array detection (DAD) using all-trans-acitretin as an internal standard and extraction by liquid–liquid partition with ethyl acetate and borate buffer at pH 9. Recovery with this extraction procedure was higher than earlier (two-step) liquid–liquid extraction procedures based on hexane, NaOH, and HCl. The overall quantification procedure was validated according to Food and Drug Administration (FDA) guidelines and fulfilled all criteria of accuracy, precision, selectivity, recovery, and stability. The overall method accuracy varied between −5.6% and +5.4% for serum and −3.8% and +6.2% for tissues, and overall precision ranged from 3.1% to 6.9% for serum and 2.1% to 8.3% for tissues (%CV batch-to-batch). The lower limit of quantification for all compounds in tumor tissue (and serum) was 3.9 ng g⁻¹ (ng mL⁻¹). Using this assay, photodegradation of the retinoids was evaluated and endogenous polar and apolar retinoids were quantified in sera and brain tumor tissues of patients and compared with serum and tonsil tissue concentrations of controls. It may thus serve as a suitable method for the characterization of retinoid uptake and metabolism in the respective compartments.     

A Convenient Stereoselective Synthesis of (1R,2S,3R,4S)-3-(Neopentyloxy)isoborneol

A convenient preparation of (1R,2S,3R,4S)-3-(neopentyloxy)isoborneol (= (1R,2S,3R,4S)-3-(2,2-dimethyl-propoxy)-1,7,7-trimethylbicyclo[2.2.1]heptan-2-ol; 1a ), a valuable chiral auxiliary, is described. The synthesis involves six steps starting from the readily available camphorquinone ( 5 ) and gives 1a in 48% overall yield. The key step is the chemoselective hydrolysis of the less hindered 1,3-dioxolane moiety in the camphorquinone di-acetal 4 .     

Determination of aminoglycoside residues in kidney and honey samples by hydrophilic interaction chromatography‐tandem mass spectrometry

Two methods based on liquid chromatography–tandem mass spectrometry were developed for the determination of ten aminoglycosides (streptomycin, dihydrostreptomycin, spectinomycin, apramycin, paromomycin, kanamycin A, gentamycin C1, gentamycin C2/C2a, gentamycin C1a, and neomycin B) in kidney samples from food‐producing animals and in honey samples. The methods involved extraction with an aqueous solution (for the kidney samples) or sample dissolution in water (for the honey samples), solid‐phase extraction with a weak cation exchange cartridge and injection of the eluate into a liquid chromatography–tandem mass spectrometry system. A zwitterionic hydrophilic interaction chromatography column was used for separation of aminoglycosides and a triple quadrupole mass analyzer was used for detection. The methods were validated according to Decision 2002/657/EC. The limits of quantitation ranged from 2 to 125 μg/kg in honey and 25 to 264 μg/kg in the kidney samples. Interday precision (RSD%) ranged from 6 to 26% in honey and 2 to 21% in kidney. Trueness, expressed as the percentage of error, ranged from 7 to 20% in honey and 1 to 11% in kidney.     

Useful dual Diels-Alder behavior of 2-azetidinone-tethered aryl imines as azadienophiles or azadienes: a beta-lactam-based stereocontrolled access to optically pure highly functionalized indolizidine systems

Imines derived from 4-oxoazetidine-2-carbaldehydes have been found to be versatile Diels-Alder reagents in that they exhibit two reactivity patterns. 2-Azetidinone-tethered imines undergo diastereoselective reaction with Danishefsky's diene in the presence of different Lewis acids. The effect of the amount of catalyst on the conversion rate as well as on the product ratio has been studied. Under standard reaction conditions, indium(III) chloride and zinc(II) iodide provided the best yields, and indium(III) triflate the highest diastereoselectivity in the Lewis acid promoted aza-Diels-Alder cycloaddition. Treatment of the aforementioned imines with cyclopentadiene, 2,3-dimethyl-1,3-butadiene or 3,4-dihydro-2 H-pyran led to cycloadducts arising from inverse electron-demand condensation involving the beta-lactam-tethered aryl imine as the heterodiene component. In addition, the first methodology for preparing indolizidines from beta-lactams has been developed. This process involves amide bond cleavage of the beta-lactam ring in the aza-Diels-Alder cycloadducts with concomitant cyclization. Full chirality transfer occurs when the reaction is performed with an enantiomerically pure substrate.     

Modular bis(oxazoline) ligands for palladium catalyzed allylic alkylation: unprecedented conformational behaviour of a bis(oxazoline) palladium eta3-1,3-diphenylallyl complex

New families of enantiopure bis(oxazolines) with 4,5-trans (5 a-g) or 4,5-cis (6 c) stereochemistry at the individual rings have been prepared in high yield. Their eta(3)-allyl palladium complexes (8 a-g, 9 c and 10) have been used as catalytic precursors in allylic alkylation reactions with excellent enantioselectivities (up to 96 %) for the trans oxazoline derivatives, while Pd/6 c system was inactive. NMR studies on palladium eta(3)-1,3-diphenylallyl intermediates (11 a, c and e) showed the presence of syn/syn- and syn/anti-allyl isomers in solution; this resembles the first example of eta(3)-eta(1)-eta(3) isomerism in Pd allylic complexes containing bis(oxazolines) derived from malonic acid.     

UV index experimental values during the years 2000 and 2001 from the Spanish broadband UV-B radiometric network

An analysis is made of experimental ultraviolet erythemal solar radiation data measured during the years 2000 and 2001 by the Spanish UV-B radiation evaluation and prediction network. This network consists of 16 Robertson-Berger type pyranometers for evaluating solar erythemal radiation and five Brewer spectroradiometers for evaluating the stratospheric ozone. On the basis of these data the Ultraviolet Index (UVI) was evaluated for the measuring stations that are located either in coastal regions or in the more densely populated regions inland on the Iberian Peninsula. It has been checked that in most cases the maximum irradiance values corresponded to solar noon, although there were exceptions that could be explained by cloudiness. The maximum experimental values of the UVI were around 9 during the summer, though frequently passing this value at the inland measurement stations. The annual accumulated dose of irradiation on a horizontal plane has also been studied, as well as the evolution through the year in units of energy, standard erythemal doses and minimum erythemal doses, according to different phototypes.     

Catalytic Effect of Electric Fields on the Kemp Elimination Reactions with Neutral Bases

The effect of solvent reaction fields and oriented electric fields on the Kemp elimination reaction between methylamine or imidazole and 5-nitrobenzisoxazole has been theoretically studied. The Kemp reaction is the most widely used for the design of new enzymes. Our results, using the SMD continuous model for solvents, are in quite good agreement with the experimental fact that the rate of the analogous reaction with butylamine is one order of magnitude smaller in water than in acetonitrile. In the case of external electric fields, our results show that they can increase or decrease the energy barrier depending on the magnitude and orientation of the field. A duly oriented electric field may have a notable catalytic effect on the reaction. So, external electric fields and reaction fields due to the medium can contribute to the design of new enzymes. Several factors that must be taken into account to increase the catalytic effect are discussed.     

Surface‐Functionalized Nanoparticles by Olefin Metathesis: A Chemoselective Approach for In Vivo Characterization of Atherosclerosis Plaque

The use of click chemistry reactions for the functionalization of nanoparticles is particularly useful to modify the surface in a well‐defined manner and to enhance the targeting properties, thus facilitating clinical translation. Here it is demonstrated that olefin metathesis can be used for the chemoselective functionalization of iron oxide nanoparticles with three different examples. This approach enables, in one step, the synthesis and functionalization of different water‐stable magnetite‐based particles from oleic acid‐coated counterparts. The surface of the nanoparticles was completely characterized showing how the metathesis approach introduces a large number of hydrophilic molecules on their coating layer. As an example of the possible applications of these new nanocomposites, a focus was taken on atherosclerosis plaques. It is also demonstrated how the in vitro properties of one of the probes, particularly its Ca²⁺‐binding properties, mediate their final in vivo use; that is, the selective accumulation in atherosclerotic plaques. This opens promising new applications to detect possible microcalcifications associated with plaque vulnerability. The accumulation of the new imaging tracers is demonstrated by in vivo magnetic resonance imaging of carotids and aorta in the ApoE^?/? mouse model and the results were confirmed by histology.     

A Self‐Improved Water‐Oxidation Catalyst: Is One Site Really Enough?

The homogeneous catalysis of water oxidation by transition‐metal complexes has experienced spectacular development over the last five years. Practical energy‐conversion schemes, however, require robust catalysts with large turnover frequencies. Herein we introduce a new oxidatively rugged and powerful dinuclear water‐oxidation catalyst that is generated by self‐assembly from a mononuclear catalyst during the catalytic process. Our kinetic and DFT computational analysis shows that two interconnected catalytic cycles coexist while the mononuclear system is slowly and irreversibly converted into the more stable dinuclear system: an extremely robust water‐oxidation catalyst that does not decompose over extended periods of time.     

Stable Mesoionic N-Heterocyclic Olefins (mNHOs)

We report a new class of stable mesoionic N-heterocyclic olefins, featuring a highly polarized (strongly ylidic) double bond. The ground-state structure cannot be described through an uncharged mesomeric Lewis-structure, thereby structurally distinguishing them from traditional N-heterocyclic olefins (NHOs). mNHOs can easily be obtained through deprotonation of the corresponding methylated N,N′-diaryl-1,2,3-triazolium and N,N′-diaryl-imidazolium salts, respectively. In their reactivity, they represent strong σ-donor ligands as shown by their coordination complexes of rhodium and boron. Their calculated proton affinities, their experimentally derived basicities (competition experiments), as well as donor abilities (Tolman electronic parameter; TEP) exceed the so far reported class of NHOs.