Comparative Evaluation of CE and HPLC for Determination of Cotinine in Human Urine

Two rapid and popular methods—capillary electrophoresis (CE) and high-performance liquid chromatography (HPLC) have been compared for analysis of cotinine in human urine. Cotinine was analyzed in less than 7 min, with detection limits of 5 and 3.2 ng mL⁻¹ for CE and HPLC, respectively. The performance of the methods was evaluated in terms of sensitivity, specificity, precision, accuracy, and limits of detection and quantification. Calibration plots were linear in the range 50–4,000 ng mL⁻¹, at least, and mean recoveries were satisfactory for both techniques. The methods were successfully used for quantification of cotinine in urine.     

Amino acids in the synthesis of heterocyclic compounds. Transformations of thiazolones into imidazole derivatives

5(4H)-Thiazolone derivative 4 , obtained from N-dithiocarbobenzoxyglycine ( 1 ) and N,N-dimethyl-N′-heteroarylformamidines 3 in acetic anhydride, was rearranged with sodium methoxide in methanol followed by acidification with acetic acid into imidazole-4-carboxylic acid derivatives 5, 6 and 7 . These were further converted with methyl iodide into methylthio derivatives 8 , with hydrogen peroxide into the corresponding disulphide 9 , with hydrazine and amines into hydrazide 10 and amides 11 . In the reactions of 4a and 6a with amines in the presence of dichloromethane symetrically disubstituted methanes 14–18 were formed.     

Ca(2.5)Sr(0.5)GaMn2O8: diamagnetic Ga in control of the structural and electronic properties of a bilayered manganate

The temperature dependence of the crystal structure and electronic properties of brownmillerite-like Ca(2.5)Sr(0.5)GaMn(2)O(8) has been studied by neutron powder diffraction and muSR spectroscopy. The results show that short-range 2D magnetic order begins to develop within the perovskite-like bilayers of MnO(6) octahedra approximately 50 K above the 3D Néel temperature of approximately 150 K. The bilayers show a structural response to the onset of magnetism throughout this temperature range whereas the GaO(4) layers that separate the bilayers only respond below the 3D ordering temperature. XANES spectroscopy shows that the sample contains Mn(3+) and Mn(4+) cations in a 1:1 ratio, and the behavior in the region of the Néel transition is interpreted as a local charge ordering. Electron diffraction and high-resolution electron microscopy have been used to show that the local microstructure is more complex than the average structure revealed by neutron diffraction, and that microdomains exist in which the GaO(4) tetrahedra show different orientations. It is argued that the bonding requirements of diamagnetic gallium control the electronic behavior within the perovskite-like bilayers.     

X‐ray investigations of bicyclic α‐methylene‐δ‐valerolactones. V. (4aS,7R,8aR)‐7‐Isopropenyl‐4a‐methyl‐3‐methyleneperhydrochromen‐2‐one

The title compound, C₁₄H₂₀O₂, adopts a conformation in which the δ‐valerolactone and cyclohexane rings are almost coplanar with one another. The γ‐methyl substituent occupies an axial position with respect to the cyclohexane ring. The δ‐valerolactone moiety adopts an envelope arrangement, while the cyclohexane ring exists in a chair conformation.     

4D-QSAR analysis of a series of antifungal p450 inhibitors and 3D-pharmacophore comparisons as a function of alignment

A training set of 55 antifungal p450 analogue inhibitors was used to construct receptor-independent four-dimensional quantitative structure-activity relationship (RI 4D-QSAR) models. Ten different alignments were used to build the models, and one alignment yields a significantly better model than the other alignments. Two different methodologies were used to measure the similarity of the best 4D-QSAR models of each alignment. One method compares the residual of fit between pairs of models using the cross-correlation coefficient of their residuals of fit as a similarity measure. The other method compares the spatial distributions of the IPE types (3D-pharmacophores) of pairs of 4D-QSAR models from different alignments. Optimum models from several different alignments have nearly the same correlation coefficients, r(2), and cross-validation correlation coefficients, xv-r(2), yet the 3D-pharmacophores of these models are very different from one another. The highest 3D-pharmacophore similarity correlation coefficient between any pair of 4D-QSAR models from the 10 alignments considered is only 0.216. However, the best 4D-QSAR models of each alignment do contain some proximate common pharmacorphore sites. A test set of 10 compounds was used to validate the predictivity of the best 4D-QSAR models of each alignment. The "best" model from the 10 alignments has the highest predictivity. The inferred active sites mapped out by the 4D-QSAR models suggest that hydrogen bond interactions are not prevalent when this class of P450 analogue inhibitors binds to the receptor active site. This feature of the 4D-QSAR models is in agreement with the crystal structure results that indicate no ligand-receptor hydrogen bonds are formed.     

Cyclic Projections in Hadamard Spaces

Journal of Optimization Theory and Applications - We show that cyclic products of projections onto convex subsets of Hadamard spaces can behave in a more complicated way than in Hilbert spaces,...     

Gibbs states of the Hopfield model with extensively many patterns

We consider the Hopfield model withM(N)=N patterns, whereN is the number of neurons. We show that if is sufficiently small and the temperature sufficiently low, then there exist disjoint Gibbs states for each of the stored patterns, almost surely with respect to the distribution of the random patterns. This solves a provlem left open in previous work. The key new ingredient is a self-averaging result on the free energy functional. This result has considerable additional interest and some consequences are discussed. A similar result for the free energy of the Sherrington-Kirkpatrick model is also given.     

Rigorous results on the thermodynamics of the dilute Hopfield model

We study the Hopfield model of an autoassociative memory on a random graph onN vertices where the probability of two vertices being joined by a link isp(N). Assuming thatp(N) goes to zero more slowly thanO(1/N), we prove the following results: (1) If the number of stored patternsm(N) is small enough such thatm(N)/Np(N) 0, asN, then the free energy of this model converges, upon proper rescaling, to that of the standard Curie-Weiss model, for almost all choices of the random graph and the random patterns. (2) If in additionm(N) < ln N/ln 2, we prove that there exists, forT< 1, a Gibbs measure associated to each original pattern, whereas for higher temperatures the Gibbs measure is unique. The basic technical result in the proofs is a uniform bound on the difference between the Hamiltonian on a random graph and its mean value.     

Enantioselective Alternating Terpolymerization of Styrene and Ethene with Carbon Monoxide. Preliminary communication

In spite of the higher reactivity of styrene with respect to ethene for the alternating copolymerization with carbon monoxide, catalyzed by chiral (dihydrooxazole)(phosphino)palladium complexes, ethene is preferentially (and randomly) enchained in terpolymerization experiments; enantioface selection for styrene is comparably high in both copolymerization and terpolymerization processes.     

Structural, textural, and electronic properties of a nanosized mesoporous ZnxTi1-xO2-) solid solution prepared by a supercritical drying route

Mesoporous nanosized TiO2 and Zn(x)Ti(1-x)O(2-x) solid solution having a Zn content below 10 mol % with a particles size between 13 and 17 nm are prepared by a template-free sol-gel method followed by high-temperature supercritical drying in 2-propanol. The structural, textural, and electronic properties of the obtained nanomaterials are methodically investigated by using XRD, SEM, TEM, ED, HREM, EDX, ICP-OES, N(2) adsorption-desorption, Raman spectroscopy, and diffuse reflectance UV-vis spectroscopy. It is shown that the proposed synthesis technique leads to the formation of a Zn(x)Ti(1-x)O(2-x) solid solution based on the anatase crystal structure rather than a two-phase sample. High-resolution electron microscopy and electron diffraction indicate that the distribution of zinc atoms over the anatase structure does not lead to a considerable deformation of the crystal structure.