Interaction of H2S with α-Fe2O3(0 0 0 1) surface

The atomic-scale structural changes in an α-Fe₂O₃ (hematite) (0 0 0 1) surface induced by sulfidation and subsequent oxidation processes were studied by X-ray photoemission spectroscopy, LEED, and X-ray standing wave (XSW) measurements. Annealing the α-Fe₂O₃(0 0 0 1) with a H₂S partial pressure of 1 × 10⁻⁷ Torr produced iron sulfides on the surface as the sulfur atoms reacted with the substrate Fe ions. The oxidation state of the substrate Fe changed from 3+ to 2+ as a result of the sulfidation. The XSW measured distance of the sulfur atomic-layer from the unrelaxed substrate oxygen layer was 3.16 Å. The sulfide phase consisted of three surface domains identified by LEED. Formation of the two-dimensional FeS₂ phase with structural parameters consistent with an outermost layer of (1 1 1) pyrite has been proposed. Atomic oxygen exposure oxidized the surface sulfide to a sulfate () and regenerated the α-Fe₂O₃(0 0 0 1) substrate, which was indicated by a (1 × 1) LEED pattern and the re-oxidization of Fe to 3+.     

New measurements of high-momentum nucleons and short-range structures in nuclei

We present new measurements of electron scattering from high-momentum nucleons in nuclei. These data allow an improved determination of the strength of two-nucleon correlations for several nuclei, including light nuclei where clustering effects can, for the first time, be examined. The data also include the kinematic region where three-nucleon correlations are expected to dominate.     

A theoretical analysis of a piezoelectric ultrasound device with an active matching layer

This paper investigates the use of magnetically active materials in the matching layer of a piezoelectric transducer. This then allows the performance of the device to be dynamically altered by applying an external field. The effect that this new matching layer has on the performance of a typical device is theoretically investigated here. It transpires that the additional flexibility of an active matching layer can be used to maintain the efficiency of the device as the external load is varied.     

A moving zone of quiet for narrowband noise in a one-dimensional duct using virtual sensing

A frequent problem in active noise control is that the zone of quiet created at the error sensor tends to be very small. This means that the error sensor generally needs to be located close to an observer's ear, which might not always be a convenient or feasible solution. Virtual sensing is a method that can move the zone of quiet away from the error sensor to a desired location that is spatially fixed. This method has been investigated previously, and has shown potential to improve the performance of an active noise control system. However, it is very likely that the desired location of the zone of quiet is not spatially fixed. An active noise control system incorporating a virtual sensing method thus has to be able to create a moving zone of quiet that tracks the observer's ears. This paper presents a method for creating a moving zone of quiet based on the LMS virtual microphone technique. To illustrate the proposed method, it is implemented in an acoustic duct and narrowband control results are presented. These results show that a moving zone of quiet was effectively created inside the duct for narrowband noise.     

Ultrafast X‐ray imaging of laser–metal additive manufacturing processes

The high‐speed synchrotron X‐ray imaging technique was synchronized with a custom‐built laser‐melting setup to capture the dynamics of laser powder‐bed fusion processes in situ. Various significant phenomena, including vapor‐depression and melt‐pool dynamics and powder‐spatter ejection, were captured with high spatial and temporal resolution. Imaging frame rates of up to 10 MHz were used to capture the rapid changes in these highly dynamic phenomena. At the same time, relatively slow frame rates were employed to capture large‐scale changes during the process. This experimental platform will be vital in the further understanding of laser additive manufacturing processes and will be particularly helpful in guiding efforts to reduce or eliminate microstructural defects in additively manufactured parts.     

Reproducibility of myelin water fraction analysis: a comparison of region of interest and voxel-based analysis methods

This study compared region of interest (ROI) and voxel-based analysis (VBA) methods to determine the optimal method of myelin water fraction (MWF) analysis. Twenty healthy controls were scanned twice using a multi-echo T₂ relaxation sequence and ROIs were drawn in white and grey matter. MWF was defined as the fractional signal from 15 to 40 ms in the T₂ distribution. For ROI analysis, the mean intensity of voxels within an ROI was fit using non-negative least squares. For VBA, MWF was obtained for each voxel and the mean and median values within an ROI were calculated. There was a slightly higher correlation between Scan 1 and 2 for the VBA method (R²=0.98) relative to the ROI method (R²=0.95), and the VBA mean square difference between scans was 300% lower, indicating VBA was the most consistent between scans. For the VBA method, mean MWF was found to be more reproducible than median MWF. As the VBA method is more reproducible and gives more options for visualization and analysis of MWF, it is recommended over the ROI method of MWF analysis.     

Constructing Space for Science at the Royal Institution of Great Britain

Those who have worked in the Royal Institution of Great Britain have, since its foundation in 1799, made significant contributions to scientific knowledge, to its practical application, and to its communication to a wide variety of audiences. Such work cannot be carried out in an architectural vacuum, and in this paper we examine how the buildings of the Royal Institution, 20 and 21 Albemarle Street in central London, have shaped the work undertaken within its walls and how, on a number of occasions, the buildings have been reconfigured to take account of the evolving needs of scientific research and communication. This paper is based on the Conservation Plan of the Royal Institution that we wrote during 2003. The Conservation Plan did not examine the land owned by the Royal Institution to the north (i.e., 22 and 23 Albemarle Street; for this area see Richard Garnier, “Grafton Street, Mayfair,” Georgian Group Journal 13 (2003), 210–272), but it did discuss 18 and 19 Albemarle Street. In this paper we concentrate on the core Royal Institution buildings at 20 and 21 Albemarle Street. Other studies of the relationship of architecture,space, and science include Crosbie Smith and Jon Agar, ed., Making Space for Science: Territorial Themes in the Shaping of Knowledge (Basingstoke: Macmillan, 1997); Peter Galison and Emily Thompson, ed., The Architecture of Science (Cambridge, Mass.: MIT Press, 1999); and Sophie Forgan,“The architecture of science and the idea of a university,” Studies in History and Philosophy of Science 20 (1989), 405–434. Frank A.J.L. James is Professor of the History of Science at the Royal Institution; he has written widely on the history of nineteenth-century science in its social and cultural contexts and is editor of the Correspondence of Michael Faraday. He is President of the British Society for the History of Science. Anthony Peers is an Associate of Rodney Melville and Partners where he works in the field of building conservation as an architectural historian. He is a Council member of the Ancient Monument Society.     

Magnetic evaluation of advanced metal-evaporated tape in an advanced linear tape drive

Demand for increased data storage has resulted in the development of various types of magnetic tapes. To achieve higher recording density, tape manufacturers are developing thin-film tapes, such as advanced metal-evaporated (AME) tape, for use in linear tape drives. In recent studies, these new AME tapes have demonstrated sustainable mechanical durability at low tensions suitable for use in linear tape drives. An evaluation of the magnetic performance of these AME tapes including the impact of tape cupping and initial edge quality was the goal of this study. Head output, dropouts, head–tape interface friction, and lateral tape motion (LTM) were monitored throughout testing. As track widths continue to narrow, LTM has become one of the critical limitations of magnetic performance. To more accurately measure LTM during drive development, a new method involving the output voltage of a head-read element that has been adjusted to be halfway off the recorded track on tape was implemented (LTM_M). It is shown that positively cupped AME tapes will result in similar head output and fewer dropouts than the current MP tapes. The negatively cupped AME sample produced the lowest head output data and the highest amount of dropouts of all the tapes evaluated in this investigation. All the tapes evaluated demonstrated similar values of LTM when monitored at the center of the tape. When LTM was monitored at the lower edge of the tape, the positively cupped AME tape with the worst relative edge contour length resulted in the highest LTM_M. As found in previous studies, AME tapes produced slightly lower values of coefficient of friction than the MP tapes. From this investigation, positively cupped AME tapes with good initial relative edge contour length are recommended for use in linear tape drives, similar to those used in this study.     

New evidence for a subshell gap at N=32

An 879.9(2) keV γ-ray transition has been identified following the β decay of ⁵⁸V and assigned as the 2⁺₁→0⁺₁ transition in ⁵⁸Cr₃₄. A peak in the energies of the first excited 2⁺ states for the even–even chromium isotopes is now evident at ⁵⁶Cr₃₂, providing empirical evidence for a significant subshell gap at N=32. The appearance of this neutron subshell closure for neutron-rich nuclides may be attributed to the diminished π1f_7/2–ν1f_5/2 monopole proton–neutron interaction as protons are removed from the 1f_7/2 single-particle orbital.     

A method for automatic identification of water and fat images from a symmetrically sampled dual-echo Dixon technique

Sampling water and fat signals symmetrically (i.e., at 0° and 180° relative phase angles) in a dual-echo Dixon technique offers high intrinsic tolerance to phase fluctuations in postprocessing and maximum signal-to-noise performance for the separated water and fat images. However, identification of which image is water and which image is fat after their separation is not possible based on the phase information alone. In this work, we proposed a semiempirical automatic image identification method that is based on the intrinsic asymmetry between the water and fat chemical shift spectra. Specifically, the approximately bimodal feature of the fat spectra and the observation that most in vivo tissues are either predominantly water or predominantly fat are used to construct a spectrum-based algorithm. Additional refinement is accomplished by considering the spatial distribution of the tissues that may have a coexistence of water and fat. The final improved algorithm was tested on a total of 131 three-dimensional patient datasets collected from different scanners and found to yield correct water and fat identification in all datasets.