Streamlined sample preparation procedure for determination of perchlorate anion in foods by ion chromatography-tandem mass spectrometry

A rapid, sensitive, and specific method was developed for the determination of perchlorate anion in foods. The foods included high moisture fruits and vegetables, low moisture foods (e.g. wheat flour and corn meal), and infant foods. Improvements to existing procedures were made in sample preparation that reduced sample test portion size from 100 to 5 or 10 g, extraction solvent volume from 150 to 20-40 ml, and replaced blending extraction-vacuum filtration and their associated large glassware with a simple shakeout-centrifugation in a small conical tube. Procedures common to all matrices involved: extraction, centrifugation, graphitized carbon solid phase extraction (SPE) cleanup, and ion chromatography-tandem mass spectrometry (IC-MS/MS) analysis. A Waters IC-Pak Anion HR column (4.6 mm × 75 mm) was eluted with 100 mM ammonium acetate in 50:50 (v/v) acetonitrile/water mobile phase at a rate of 0.35 ml/min. A triple stage quadrupole mass spectrometer, equipped with electrospray ionization (ESI) in the negative ion mode, was used to detect perchlorate anion. An ¹⁸O₄-labeled perchlorate anion internal standard was used to correct for any matrix effects. The method limit of quantitation (LOQ) was: 1.0 μg/kg in fruits, vegetables, and infant foods; 3.0 μg/kg in dry products. Fortified test portions gave 80-120% recoveries. Determination of incurred perchlorate anion residues agreed well with results for comparable commodities or products analyzed by published methods.     

Bidentate phosphorus baskets by intramolecular phosphinidene addition

Intramolecular phosphinidene addition to the C==C bond of Mo-complexed, seven-membered phosphorus heterocycles affords three novel [(diphos)Mo(CO)(4)] complexes (18-20). The three bidentate phosphorus baskets differ in the composition of the seven-membered ring: one of the phosphorus atoms is flanked by CH(2), NCH(3), or O. The unsaturated tetrahydrophosphepine precursors are synthesized by either ring-closing metathesis (C and N derivatives) or by a cyclization sequence (O derivative). The crystal structures of the nitrogen- (19) and oxygen-containing (20) baskets have relatively small P-Mo-P angles of 76.240(13) degrees and 77.626(12) degrees , respectively, and complex 20 has slightly shortened Mo--P bond lengths.     

Generation of end-group information from polyethers by matrix-assisted laser desorption/ionisation collision-induced dissociation mass spectrometry

A series of polyethers, namely poly(ethylene glycol) (PEG), poly(propylene glycol) (PPG), poly(butylene glycol) (PBG) and poly(tetramethylene glycol) (PTMeG), has been characterised by means of matrix-assisted laser desorption/ionisation collision-induced dissociation (MALDI-CID) using a hybrid sector orthogonal-time-of-flight (TOF) instrument. The data indicate that this technique can be used to generate information about the end-group functionality of these polymers, including in some cases information about branching of the alkyl chains of the initiating groups. Proposals are made for the fragmentation pathways for these polymers.     

Optimisation and characterisation of biosensors based on polyaniline

With lower limits of detection and increased stability constantly being demanded of biosensor devices, characterisation of the constituent layers that make up the sensor has become unavoidable, since this is inextricably linked with its performance. This work describe the optimisation and characterisation of two aspects of sensor performance: a conductive polymer layer (polyaniline) and the immobilised protein layer. The influence of the thickness of polyaniline films deposited electrochemically onto screen-printed electrode surfaces is described in this work in terms of its influence on a variety of amperometric sensor performance characteristics: time to reach steady state, charging current, catalytic current, background current and signal/background ratios. The influence of polymer film thickness on the conductivity and morphology of finished films is also presented.

An electrostatic method of protein immobilisation is used in this work and scanning electron microscopy in conjunction with gold-labelled antibodies and back-scattered electron detection has enabled the direct visualisation of individual groups of proteins on the sensor surface. Such information can provide an insight into the performance of sensors under influence of increasing protein concentrations.     

Building up key segments of N-glycans in the gas phase: intrinsic structural preferences of the alpha(1,3) and alpha(1,6) dimannosides

The intrinsic conformer specific vibrational spectra of two important subunits of the core pentasaccharide of N-linked glycans, the alpha(1,3) and alpha(1,6) dimannosides, have been recorded in the gas phase. Coupling these measurements with a computational exploration of their conformational landscapes has enabled their conformational assignment and has identified characteristic vibrational signatures associated with particular conformational families-including those that do or do not display inter-ring hydrogen bonding across the glycosidic linkage. In addition, the IR spectra of the monosaccharide moieties provide benchmarks, through which the conformational assignments can be refined. This introduces a general concept of modularity and secondary structure in oligosaccharides--essential for the success of similar studies on larger oligosaccharides in the future.     

Synthesis and photophysical properties of borondipyrromethene dyes bearing aryl substituents at the boron center

Several borondipyrromethene (Bodipy) dyes bearing an aryl nucleus linked directly to the boron center have been prepared under mild conditions. The choice of Grignard or lithio organo-metallic reagents allows the isolation of B(F)(aryl) or B(aryl)2 derivatives; where aryl refers to phenyl, anisyl, naphthyl, or pyrenyl fragments. A single crystal, X-ray structure determination for the bis-anisyl compound shows that the sp3 hybridized boron center remains pseudo-tetrahedral and that the B-C bond distances are 1.615 and 1.636 A. All compounds are electrode active but replacement of the fluorine atoms by aryl fragments renders the Bodipy unit more easily oxidized by 100 mV in the B(F)(aryl) and 180 mV in the B(aryl)2 compounds whereas reduction is made more difficult by a comparable amount. Strong fluorescence is observed from the Bodipy fluorophore present in each of the new dyes, with the radiative rate constant being independent of the nature of the aryl substituent. The fluorescence quantum yields are solvent dependent and, at least in some cases (aryl = anisyl or pyrenyl), nonradiative decay from the first-excited singlet state is strongly activated. There is no indication, however, for population of a charge-transfer state, in which the aryl substituent acts as donor and the Bodipy fragment functions as acceptor, that is strongly coupled to the ground state. Instead, it is conjectured that nonradiative decay involves a conformational change driven by the solvophobic effect. Thus, the rate of nonradiative decay in any given solvent increases with increasing surface accessibility (or molar volume) of the aryl substituent. Intramolecular energy transfer from pyrene or naphthalene residues to Bodipy is quantitative.     

Effect of block length, polydispersity, and salt concentration on PEO-PDEAMA block copolymer structures in dilute solution

A series of poly(ethylene oxide)-block-poly(N,N-diethylaminoethyl methacrylate) (PEO-PDEAMA) block copolymers with relatively high polydispersity (1.36 < PDI < 1.96) have been prepared to determine the effect that polydispersity has on the self-assembly of amphiphilic block copolymers in dilute solution. Because monodisperse macroinitiators were used for the ATRP reactions, the polydispersity resides within the hydrophobic block. By adjusting the relative block lengths, spherical micelles, wormlike micelles, vesicles, or a precipitate is formed. Here, we show that relatively high polydispersity in the block copolymer does not preclude efficient self-assembly. We also discuss the effect of increasing the concentration of NaCl in the systems and show that this can result in a shift from one morphology to another. These shifts are reversible in some cases, but for PEO12-PDEAMA39, this method allows access to giant vesicles of between 500 nm and 1 microm in diameter.     

Enhancement of a conducting polymer-based biosensor using carbon nanotube-doped polyaniline

A biosensor with improved performance was developed through the immobilization of horseradish peroxidase (HRP) onto electropolymerized polyaniline (PANI) films doped with carbon nanotubes (CNTs). The effects of electropolymerization cycle and CNT concentration on the response of the biosensor toward H₂O₂ were investigated. It was found that the application of CNTs in the biosensor system could increase the amount and stability of the immobilized enzyme, and greatly enhanced the biosensor response. Compared with the biosensor without CNTs, the proposed biosensor exhibited enhanced stability and approximately eight-fold sensitivity. A linear range from 0.2 to 19 μM for the detection of H₂O₂ was observed for the proposed biosensor, with a detection limit of 68 nM at a signal-to-noise ratio of 3 and a response time of less than 5 s.     

Delineation of a fundamental alpha-ketoheterocycle substituent effect for use in the design of enzyme inhibitors

The synthesis and examination of a systematic series of 5-substituted 2-keto oxazoles as inhibitors of fatty acid amide hydrolase (FAAH) defined a fundamental substituent effect that led to the discovery of inhibitors with Ki's as low as 400 pM. The intrinsic basis of the relationship (-log Ki vs sigmap), which relates Ki with the Hammett sigmap constant of the substituent, the magnitude of the effect (rho = 3.01), and its predictive value (R2 = 0.91) suggest a widespread applicability in studies beyond FAAH.