Effects of sintering temperature and atmosphere on magnetism in Mn-doped TiO2 bulk samples

Magnetic properties have been investigated on Mn doped TiO₂(Ti_0.98Mn_0.02O₂) bulk samples prepared by solid state reaction, which were sintered at different temperature ranging from 450 ^°C to 900 ^°C in air and argon atmosphere, respectively. The results show that the magnetic properties were strongly dependent on the sintering temperature and atmosphere. For samples sintered in air, the magnetization initially increase with the increase of sintering temperature up to 600 ^°C and thereafter it decrease. While the magnetization of samples sintered in argon atmosphere decreases monotonically with the increase of sintering temperature. Furthermore, for samples sintered at 600 ^°C in air, the magnetic susceptibility exhibits a dominant Curie-Weiss behaviour and no magnetic transition is observed over the temperature range from 10 to 300 K. In contrast, for samples sintered in argon atmosphere, besides the magnetic transition near 45 K perhaps caused by Mn₃O₄, another magnetic transition appears near room temperature.     

Application of the first collision source method to CSNS target station shielding calculation

Ray effects are an inherent problem of the discrete ordinates method. RAY3 D, a functional module of ARES, which is a discrete ordinates code system, employs a semi-analytic first collision source method to mitigate ray effects. This method decomposes the flux into uncollided and collided components, and then calculates them with an analytical method and discrete ordinates method respectively. In this article, RAY3 D is validated by the Kobayashi benchmarks and applied to the neutron beamline shielding problem of China Spallation Neutron Source(CSNS)target station. The numerical results of the Kobayashi benchmarks indicate that the solutions of DONTRAN3 D with RAY3 D agree well with the Monte Carlo solutions. The dose rate at the end of the neutron beamline is less than10.83 μSv/h in the CSNS target station neutron beamline shutter model. RAY3 D can effectively mitigate the ray effects and obtain relatively reasonable results.     

Refractive indices of biaxial crystals evaluated from the refractive indices ellipsoid equation

The expressions of the refractive indices corresponding wave vector k(θ,) are given by using coordinate transformations for the refractive indices ellipsoid equation of biaxial crystals. The refractive index expression of the wave, whose velocity is slower, is given by

and that of the wave, whose velocity is faster, is given by

     

Micellar core-shell-type acrylic-polyurethane hybrid materials with self-polishing property

Abstract

Marine fouling can be a serious problem in the shipping industry, since it increases the surface roughness of the hull and hence its frictional resistance to its movement through water. Antifouling paint can be defined as preventing the attachment of marine organisms onto surfaces. However, the most commonly used antifouling coating which is the tributyltin-based self-polishing copolymer causes the severe pollution of marine environment. Ammonium salt-based paints include tertiary amines as biocides which have effective biocidal and biodegradable properties without accumulation in the sea environment. However, ammonium salt-based coatings were too sensitive to seawater and became swollen. In this study, polyurethane-acrylic copolymers were synthesized by radical polymerization. These hybrid materials were found to form core–shell structures in aqueous media. Synthesis and properties of copolymers were investigated by Fourier transform-infrared spectrometer, proton-nuclear magnetic resonance, transmission electron microscopy, and dynamic light scattering. The polishing rate of self-polishing copolymer was determined from the reduction in dry film thickness after artificial seawater immersion under a dynamic condition.     

用液晶空间光调制器产生光阱阵列

液晶空间光调制器能够方便地用于制作各种衍射型光学元件, 但液晶空间光调制器存在分辨率有限的缺点, 本文提出了用液晶空间光调制器制作相位型光栅, 产生一维和二维光阱阵列的新方案, 用迭代傅里叶级数算法优化设计光栅的相位分布, 在不改变空间光调制器硬件参数设置的情况下, 充分利用和发掘了空间光调制器的优点, 同时又能较好地回避其所存在的缺陷. 根据现有的空间光调制器的技术参数, 模拟仿真设计光栅, 计算光强分布, 结果表明: 用大失谐、小功率激光照明, 能够产生具有很高峰值光强和光强梯度的光阱阵列, 囚禁冷原子的光学偶极势达到mK量级, 对原子的作用力远大于原子的重力.     

Influence of annealing treatment on as-grown Ib-type diamond crystal at a high temperature and high pressure

In this paper,we report on the influence of annealing treatment on as-grown Ib-type diamond crystal under high pressure and high temperature in a china-type cubic anvil high-pressure apparatus.Experiments are carried out at a pressure of 7.0 GPa and temperatures ranging from 1700 C to 1900 C for 1 h.Annealing treatment of the diamond crystal shows that the aggregation rate constant of nitrogen atoms in the as-grown Ib-type diamond crystal strongly depends on diamond morphology and annealing temperature.The aggregation rate constant of nitrogen remarkably increases with the increase of annealing temperature and its value in octahedral diamond is much higher than that in cubic diamond annealed at the same temperature.The colour of octahedral diamond crystal is obviously reduced from yellow to nearly colorless after annealing treatment for 1 h at 1900 C,which is induced by nitrogen aggregation in a diamond lattice.The extent of nitrogen aggregation in an annealed diamond could approach approximately 98% indicated from the infrared absorption spectra.The micro-Raman spectrum reveals that the annealing treatment can improve the crystalline quality of Ib-type diamond characterized by a half width at full maximum at first order Raman peak,and therefore the annealed diamond crystals exhibit nearly the same properties as the natural IaA-type diamond stones of high quality in the Raman measurements.     

丙烷-氢气-空气预混层流燃烧特性研究

利用高速纹影摄像法和球型发展火焰研究了常温常压下丙烷-氢气-空气预混层流燃烧特性,获得了不同氢气体积分数和当量比下混合气的层流燃烧速率、Markstein数、Zeldovich数和Lewis数.结果表明:随着氢气比例的提高,层流燃烧速率增加,火焰厚度降低;当氢气体积分数小于60%时,随着当量比的增加,Markstein数降低,当氢气体积分数大于60%时,随着当量比的增加,Markstein数增加.当量比小于1.2时,随着氢气比例增加,Markstein数降低.当量比大于1.2时,随着氢气比例增加,Markstein数增加.随着氢气比例的增加,Zeldovich数降低,全局Lewis数降低.