Unified gas and supercritical fluid chromatography on 50 μm i.d. Columns

A unified approach to sequential gas and supercritical fluid Chromatography using 50 μm i.d. open tubular columns is described. Sample introduction is performed by means of a rotary injection valve. In order that linear velocities can be optimized independently, a second rotary valve in the chromatographic oven is used to direct the flow of column eluate to the flame ionization detector through either fused silica tubing in GC, or a frit restrictor in SFC. Applications of sequential GC-SFC on a 50 μm i.d. open tubular column are demonstrated, and comparisons made between sequential GC-SFC on 50 and 100 μm i.d. columns.     

The analysis of lubricating oil additives by supercritical fluid chromatography with packed and open tubular capillary columns

Lubricating oil additives have been analyzed by supercritical fluid chromatography on open tubular and packed capillary columns. Carbon dioxide and modified carbon dioxide were used as mobile phases and detection was accomplished by flame ionization and micro UV. Rapid and efficient analysis of the lubricating oil additives was demonstrated.     

Hydroxamic acid polymers. II. Design of a polymeric chelating agent for iron

The iron chelating ability of hydroxamic acid polymers was studied as a function of the atomic chain spacing separating neighboring hydroxamic acid units. Two polymers were prepared, one having the hydroxamic acid group separated by 11 atoms and the other by three atoms. The iron binding of these polymers was compared with the model compound desferrioxamine B (DFO) and with a previously prepared polymer having a nine-atom spacing. Mole ratio plots indicated the following order of stability: DFO ≈ 11 atom > 9 atom > 3 atom. These results are in accordance with the picture derived from molecular models which shows that with a spacing of 11 atoms, three neighboring hydroxamic acids can fit the octahedral arrangement of the iron (III) complex without appreciable strain. Some strain is introduced when the spacing becomes only nine atoms, and with three atoms, complex formation between three neighboring groups becomes virtually impossible.     

Effect of the parent ligand on the photophysical properties of closely-coupled, binuclear ruthenium(II) tris(2,2'-bipyridine) complexes

The photophysical properties of closely-coupled, binuclear complexes formed by connecting two ruthenium(II) tris(2,2'-bipyridine) complexes via an alkynylene group differ significantly from those of the relevant mononuclear complex. In particular, the energy of the first triplet excited state is lowered relative to the parent complex, because of the presence of the alkynylene substituent, while the triplet lifetime is prolonged, in part, because of extended electron delocalization. We now report that the triplet lifetime is also affected by the nature of the spectator 2,2'-bipyridyl ligands. Thus, replacing the parent 2,2'-bipyridine ligands with the corresponding 4,4'-dinitro-substituted ligands serves to decrease the luminescence yield and lifetime. With the corresponding carboxylate ester, the luminescence yield and lifetime are increased. Perdeuteration of the parent 2,2'-bipyridine ligands also leads to a modest increase in the luminescence yield. Such observations are indicative of electronic coupling between the various metal-to-ligand, charge-transfer excited triplet states. Temperature dependence studies confirm that these excited states are closely spaced and thermally accessible at ambient temperature. For some of the binuclear complexes, the quantum yield for formation of the lowest-energy triplet state is significantly less than unity.     

The reaction of 1,2-dilithiotetrafluorobenzene with group V halides

Although the arsenic containing analogue of triptycene, 5,10-$\text{o}$-benzenoarsanthrene $\text{A}$ (E=As) was isolated some time ago [1] the related derivatives of antimony and bismuth are unknown. We now find that when 1,2-diiodotetrafluorobenzene is treated with methyllithium at -78/dg, to afford the little studied dilithiotetrafluorobenzene [2], and the appropriate metal chloride is added to the resulting solution, perfluorinated analogues of $\text{A}$ (E = As, Sb, or Bi) are obtained in good yield. These are stable volatile solids.

     

An anion-dependent switch in selectivity results from a change of C-H activation mechanism in the reaction of an imidazolium salt with IrH5(PPh3)2

Changing the counteranion along the series Br, BF4, PF6, SbF6 in their ion-paired 2-pyridylmethyl imidazolium salts causes the kinetic reaction products with IrH5(PPh3)2 to switch from chelating N-heterocyclic carbenes (NHCs) having normal C2 (N path) to abnormal C5 binding (AN path). Computational work (DFT) suggests that the AN path involves C-H oxidative addition to Ir(III) to give Ir(V) with little anion dependence. The N path, in contrast, goes by heterolytic C-H activation with proton transfer to the adjacent hydride. The proton that is transferred is accompanied by the counteranion in an anion-coupled proton transfer, leading to an anion dependence of the N path, and therefore of the N/AN selectivity. The N path goes via Ir(III), not Ir(V), because the normal NHC is a much less strong donor ligand than the abnormal NHC. PGSE NMR experiments support the formation of ion-pair in both the reactants and the products. 19F,1H-HOESY NMR experiments indicate an ion-pair structure for the products that is consistent with the computational prediction (ONIOM(B3PW91/UFF)).     

Carbon-carbon coupling on tetrahedral iridium clusters: X-ray molecular structures and multinuclear NMR studies of the two isomeric forms of [Ir4(CO)6(μ3-η-HCCPh)(μ2-η-C4H2Ph2)(μ-PPh2)2]

The reactions of [HIr₄(CO)₉(Ph₂PCCPh)(μ-PPh₂)] (1) or [Ir₄(CO)₈(μ₃-η²-HCCPh)(μ-PPh₂)₂] (2) with HCCPh gave two isomeric forms of [Ir₄(CO)₆(μ₃-η²-HCCPh)(μ₂-η⁴-C₄H₂Ph₂)(μ-PPh₂)₂] (3 and 4) in good yields as the only products. These compounds were characterized with analytical and spectroscopic data including ¹H, ¹³C and ³¹P NMR (1 and 2D) spectroscopy and their molecular structures were established by X-ray diffraction studies. Compounds 3 and 4 exhibit the same distorted butterfly metal polyhedral arrangement of metal atoms with two μ-PPh₂ that occupy different positions in the structures of the two isomers. Both molecules contain a HCCPh ligand bonded in a μ₃-η²-// mode to one of the wings of the butterfly and a metallacyclic ring, which resulted from head-to-tail coupling, in the case of [Ir₄(CO)₆(μ₃-η²-HCCPh){μ₂-η⁴-(H)CC(Ph)C(H)C(Ph)}(μ-PPh₂)₂] (3) and tail-to-tail coupling, in that of [Ir₄(CO)₆(μ₃-η²-HCCPh){μ₂-η⁴-(H)CC(Ph)C(Ph)C(H)}(μ-PPh₂)₂] (4), and which is linked to two metal atoms of the second wing of the butterfly.     

Amides as precursors of imidoyl radicals in cyclisation reactions

Amides have been successfully used as precursors of imidoyl radicals for radical cyclisation. The amides have been converted to imidoyl selanides via reaction with phosgene to yield imidoyl chlorides followed by reaction with potassium phenylselanide. Imidoyl selanides were reacted with tributyltin hydride (Bu₃SnH) as the radical mediator with triethylborane or AIBN as initiators to yield imidoyl radicals for cyclisation reactions. Imidoyl radicals have been cyclised onto alkenes to yield 2,3-substituted-indoles and -quinolines and also onto pyrroles and indoles to give bi- and tricyclic heteroarenes.     

Probing electrochemical properties of pi-conjugated thienylenevinylenes/fullerene C(60) adducts by ESI/MS: evidence for dimerized cation-radicals

Oligothienylenevinylenes/C(60) dyads n-C and triads n-C(2) are studied by electrospray mass spectrometry. A clear correlation is observed between the nature of the charged species detected by mass spectrometry, i.e. protonated molecule [M + H], (+) cation radical M(+.) and dication M(++), and the oxidation potentials of the molecules. Moreover, under defined solubility conditions, mass spectrometry provides conclusive evidences for the reversible dimerization of cation-radicals of n-C(2) compounds.     

The design and synthesis of porphyrin/oligiothiophene hybrid monomers

In an effort to build effective photovoltaic cells based on porphyrin-functionalised polythiophenes we have focused on synthetic routes to three monomer types. By controlling the geometric structure of the monomer, oxidation of these materials should produce polymers with different architectural structures, and as a result, different opto-electronic properties. Employing Wittig protocols allowed access to monomers in which the porphyrin moiety is connected to the beta-position of the thiophene via an alkene linkage. In addition, monomers were constructed using porphyrin condensation methods to afford alpha-thiophene meso-substituted porphryins. Another set of monomers was also prepared via porphyrin condensation routes, but instead utilising beta-formylthiophenes. By utilising different formyloligothiophenes we were able to generate a series of monomers that can be used to control the loading of the porphyrin in the polythiophene matrix.