Determination of tributyltin oxide in coastal marine sediments and mussels by electrothermal atomic absorption spectrometry

We have devised a new method for bis(tributyltin)oxide (TBTO) determination in marine sediments and mussels. This technique involves an n-hexane/methylene chloride mixture extraction and extract purification with a sodium hydroxide wash in order to eliminate interfering compounds. TBTO is then extracted again by nitric acid and converted into an inorganic tin species; the analysis has been effected using Zeeman graphite furnace-atomic absorption spectrophotometry. The method detection limit for the matrices examined is 0.004 μg TBTO g^?1 (wet weight) and is sufficient for the analysis in real samples. The percentage recovery of TBTO from sediments and mussels samples is higher than 85% and 95% respectively. This method has been applied to TBTO level determination in sediments and mussels (Mytilus galloprovincialis) sampled in the harbour area in Taranto, where mussel culture activities are much developed; the TBTO levels obtained in sediments and mussels were in the range 15-47 ng g^?1 (wet weight) and 11-30 ng g^?1 (wet weight) respectively. Such values are comparable with those found in other harbour areas in the Mediterranean Sea.     

Study on reproductive endocrinology of human placenta (III)--Hormonal regulation of progesterone production by trophoblast tissue of first trimester.

The effect of hormones on progesterone secretion by 6-8 week human trophoblast tissue cultured in serum-free medium has been investigated. GnRH at low concentration (10(-10)-10(-8) mol/L) stimulated progesterone secretion, while high dose (10(-6)-10(-5) mol/L) produced inhibitory effect. The progesterone secretion could be significantly decreased by addition of anti-hCG antiserum or monoclonal anti-hCG IgG in a dose- and time-dependent manner. Various concentrations of TRH, PGE2, PGF2 alpha, testosterone and estradiol were found to be ineffective. These data indicate clearly that progesterone production by human trophoblast tissue at early gestation stage is under the modulation of GnRH and hCG.     

Early experiments with slow positrons in atomic physics

The major steps in the evolution of techniques for producing positron beams of well defined energies over the last 25 years are reviewed. Developments in the methods of using these beams for experiments in atomic physics are then traced historically     

Special features of the radiative capture of ultracold neutrons by thin and thick layers of matter

The radiative capture of ultracold neutrons traversing thin and thick homogeneous layers of matter is analyzed. The applicability range of the formulas for the probabilities of reflection, transmission, and capture in thick layers (under certain conditions, they admit a simple interpretation—it is often quoted in the literature—that is based on the effective capture cross section, which is in inverse proportion to the velocity of a neutron in matter) is investigated, along with the conditions under which there arises the effective capture cross section.     

Radical copolymerization of 2‐trifluoromethylacrylic monomers. II. Kinetics,monomer reactivities,and penultimate effect in their copolymerization with norbornenes and vinyl ethers

Radical copolymerizations of electron‐deficient 2‐trifluoromethylacrylic (TFMA) monomers, such as 2‐trifluoromethylacrylic acid and t‐butyl 2‐trifluoromethylacrylate (TBTFMA), with electron‐rich norbornene derivatives and vinyl ethers with 2,2′‐azobisisobutyronitrile as the initiator were investigated in detail through the analysis of the kinetics in situ with ¹H NMR and through the determination of the monomer reactivity ratios. The norbornene derivatives used in this study included bicyclo[2.2.1]hept‐2‐ene (norbornene) and 5‐(2‐trifluoromethyl‐1,1,1‐trifluoro‐2‐hydroxylpropyl)‐2‐norbornene. The vinyl ether monomers were ethyl vinyl ether, t‐butyl vinyl ether, and 3,4‐dihydro‐2‐H‐pyran. Vinylene carbonate was found to copolymerize with TBTFMA. Although none of the monomers underwent radical homopolymerization under normal conditions, they copolymerized readily, producing a copolymer containing 60–70 mol % TFMA. The copolymerization of the TFMA monomer with norbornenes and vinyl ethers deviated from the terminal model and could be described by the penultimate model. The copolymers of TFMA reported in this article were evaluated as chemical amplification resist polymers for the emerging field of 157‐nm lithography. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1478–1505, 2004     

Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007     

Stability of translating solutions to mean curvature flow

We prove stability of rotationally symmetric translating solutions to mean curvature flow. For initial data that converge spatially at infinity to such a soliton, we obtain convergence for large times to that soliton without imposing any decay rates. The authors are members of SFB 647/B3 “Raum – Zeit – Materie: Singularity Structure, Long-time Behaviour and Dynamics of Solutions of Non-linear Evolution Equations”.     

A characterization of certain irreducible symplectic 4-folds

 We give a characterization of irreducible symplectic fourfolds which are given as Hilbert scheme of points on a K3 surface. Received: 26 June 2002 / Revised version: 9 September 2002 Published online: 14 February 2003 Mathematics Subject Classification (2000): Primary 14J32, Secondary 32Q20     

Synthesis and thermal crosslinking of oxazolidine‐functionalized polyurethanes

A new oxazolidine derivative was obtained from phenol, 2‐amino‐2‐methylpropane‐1,3‐diol and paraformaldehyde. The reaction of this novel oxazolidine diol with phenylisocyanate lead to a urethane model compound which can be polymerized thermally by oxazolidine ring opening to give a Mannich bridge structure. Linear segmented polyurethanes were prepared by reaction of different ratios of oxazolidine diol and commercial polyethylenglycol (M_w ～ 400) with 4,4′‐methylenbis (cyclohexylisocyanate) (HMDI, 90% isomers mixture). The polyurethanes were thermally characterized and crosslinked by oxazolidine ring opening to obtain materials which showed improved thermal stability. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4965–4973, 2007