Monoclonal antibody based electrochemical immunosensor for the determination of ochratoxin A in wheat

Competitive electrochemical enzyme-linked immunosorbent assays based on disposable screen-printed electrodes have been developed for quantitative determination of ochratoxin A (OTA). The assays were carried out using monoclonal antibodies in the direct and indirect format. OTA working range, I₅₀ and detection limits were 0.05-2.5 and 0.1-7.5 μg L⁻¹, 0.35 (±0.04) μg L⁻¹ and 0.9 (±0.1) μg L⁻¹, 60 and 100 μg L⁻¹ in the direct and indirect assay format, respectively. The immunosensor in the direct format was selected for the determination of OTA in wheat. Samples were extracted with aqueous acetonitrile and the extract analyzed directly by the assay without clean-up. The I₅₀ in real samples was 0.2 μg L⁻¹ corresponding to 1.6 μg/kg in the wheat sample with a detection limit of 0.4 μg/kg (calculated as blank signal −3σ). Within- and between-assay variability were less than 5 and 10%, respectively. A good correlation (r = 0.9992) was found by comparative analysis of naturally contaminated wheat samples using this assay and an HPLC/immunoaffinity clean-up method based on the AOAC Official Method 2000.03 for the determination of OTA in barley.     

Two general methods for the isolation of enzyme activities by colony filter screening

We describe two general methodologies, based on filter-sandwich assays, for isolating enzymatic activities from a large repertoire of protein variants expressed in the cytoplasm of E. coli cells. The enzymes are released by the freezing and thawing of bacterial colonies grown on a porous master filter and diffuse to a second "reaction" filter that closely contacts the master filter. Reaction substrates can be immobilized either on the filter or on the enzyme itself (which is then, in turn, captured on the reaction filter). The resulting products are detected with suitable affinity reagents. We used biotin ligase as a model enzyme to assess the performance of the two methodologies. Active enzymes were released by the bacteria, locally biotinylated the immobilized target substrate peptide, and allowed the sensitive and specific detection of individual catalytically active colonies.     

Comparison between two anionic reverse micelle interfaces: the role of water-surfactant interactions in interfacial properties

The water/sodium bis(2-ethylhexyl) phosphate (NaDEHP) reverse micelle (RM) system is revisited by using, for the first time, molecular probes to investigate interface properties. The solvatochromic behavior of 1-methyl-8-oxyquinolinium betaine (QB) and 6-propionyl-2-(N,N-dimethyl)aminonaphthalene (PRODAN) in the water/NaDEHP/toluene system is studied, and the results are compared with those obtained in water/sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (AOT)/toluene RM media. The results demonstrate that the micropolarity, microviscosity, interfacial water structure, molecular probe partition, and intramolecular electron-transfer processes are dramatically altered for NaDEHP RM interfaces in comparison to the AOT systems. Because of organic nonpolar solvent penetration into the interface, NaDEHP RM media offer an interface with lower micropolarity and microviscosity than AOT media. Also, the interfacial water in the NaDEHP system shows enhanced water-water hydrogen-bond interaction in comparison with bulk water. The AOT RM interface represents a unique environment for PRODAN to undergo dual emission.     

Review of recent advances in the preparation of organic polymer monoliths for liquid chromatography of large molecules

In recent years the use of monolithic polymers in separation science has greatly increased due to the advantages these materials present over particle-based stationary phases, such as their relative ease of preparation and good permeability. For these reasons, these materials present high potential as stationary phases for the separation and purification of large molecules such as proteins, peptides, nucleic acids and cells. An example of this is the wide range of commercial available polymer-based monolithic columns now present in the market.     

Cyanuric chloride catalyzed Beckmann rearrangement of ketoximes in biodegradable ionic liquids

Imidazolium-based ionic liquids (ILs) containing ester moieties in the side chain were successfully used as an alternative to traditional ILs in the Beckmann rearrangement of ketoximes catalyzed by 2,4,6-trichloro[1,3,5]triazine. The procedure is mild and suitable for both aromatic and cycloaliphatic substrates affording the rearrangement products in good to quantitative yields. The process is eco-sustainable since these ILs are biodegradable and in addition they can be recovered and reused.     

Adsorption and thermal decomposition of 2-octylthieno[3,4-b]thiophene on Au(111)

The adsorption and thermal stability of 2-octylthieno[3,4-b]thiophene (OTTP) on the Au(111) surfaces have been studied using scanning tunneling microscopy (STM), temperature programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS). UHV-STM studies revealed that the vapor-deposited OTTP on Au(111) generated disordered adlayers with monolayer thickness even at saturation coverage. XPS and TPD studies indicated that OTTP molecules on Au(111) are stable up to 450K and further heating of the sample resulted in thermal decomposition to produce H(2) and H(2)S via C-S bond scission in the thieno-thiophene rings. Dehydrogenation continues to occur above 600K and the molecules were ultimately transformed to carbon clusters at 900K. Highly resolved air-STM images showed that OTTP adlayers on Au(111) prepared from solution are composed of a well-ordered and low-coverage phase where the molecules lie flat on the surface, which can be assigned as a (9×2√33)R5° structure. Finally, based on analysis of STM, TPD, and XPS results, we propose a thermal decomposition mechanism of OTTP on Au(111) as a function of annealing temperature.     

Analysis of Bile Acids Profile in Human Serum by Ultrafiltration Clean-up and LC-MS/MS

Bile acids (BAs) are useful biomarkers for the diagnosis of many diseases. The pathologies related to bile acid synthesis are often expressed in the first years of life and may lead to serious liver injury. Here we present a sensitive and rapid method for the analysis of the main 14 bile acids in human serum by liquid chromatography-tandem mass spectrometry. The chromatographic separation is performed using a core–shell column which provides improved separation, highly desirable considering the small structural differences among the analytes. All isomeric BAs of interest were resolved in less than 9 min. Sample pretreatment consisted in ultrafiltration of serum after addition of methanol by means of centrifugal filter devices. The calculated LOQs ranged between 2 and 5 ng mL⁻¹ with linearity of the calibration curves in the 5–5,000 ng mL⁻¹ range for all the BAs. The extraction recoveries for all the analytes were higher than 80 %. Intra-day and inter-day coefficients of variation were all below 15 %. The method proposed has been validated and has been applied for the analysis of serum of pediatric patients. This simple procedure allowed minimal consumption of serum sample (about 100 μL) and a rapid assay, easily implementable in routine analysis.

     

A convenient procedure for the synthesis of tetrathia-[7]-helicene and the selective α-functionalisation of terminal thiophene ring

This paper describes a convenient preparation of tetrathia-[7]-helicene (TH[7]), the generation of the α-anion on the terminal thiophene ring, and the synthesis of the 2-formyl-tetrathia-[7]-helicene (2-CHO-TH[7]). The key intermediate trans-1,2-dibenzodithiophene-ethene, prepared in 97% yield by McMurry coupling of the 2-formyl-benzo[1,2-b;4,3-b′]dithiophene, was transformed into TH[7] using a known procedure. The described method affords TH[7] in 46% overall yield, which is more than four times the yield previously reported in the literature. The α-anion of TH[7], which is easily generated on the α-position of one of the terminal thiophene rings, reacts with electrophilic reagents such as D₂O and DMF. The latter reaction proved to be the best way to prepare 2-CHO-TH[7], a key intermediate for the preparation of new substituted heterohelicenes.