Activation of Aryl and Heteroaryl Halides by an Iron(I) Complex Generated in the Reduction of [Fe(acac)3] by PhMgBr: Electron Transfer versus Oxidative Addition

The mechanism of the reactions of aryl/heteroaryl halides with aryl Grignard reagents catalyzed by [Fe^III(acac)₃] (acac=acetylacetonate) has been investigated. It is shown that in the presence of excess PhMgBr, [Fe^III(acac)₃] affords two reduced complexes: [PhFe^II(acac)(thf)_n] (n=1 or 2) (characterized by ¹H NMR and cyclic voltammetry) and [PhFe^I(acac)(thf)]^? (characterized by cyclic voltammetry, ¹H NMR, EPR and DFT). Whereas [PhFe^II(acac)(thf)_n] does not react with any of the investigated aryl or heteroaryl halides, the Fe^I complex [PhFe^I(acac)(thf)]^? reacts with ArX (Ar=Ph, 4‐tolyl; X=I, Br) through an inner‐sphere monoelectronic reduction (promoted by halogen bonding) to afford the corresponding arene ArH together with the Grignard homocoupling product PhPh. In contrast, [PhFe^I(acac)(thf)]^? reacts with a heteroaryl chloride (2‐chloropyridine) to afford the cross‐coupling product (2‐phenylpyridine) through an oxidative addition/reductive elimination sequence. The mechanism of the reaction of [PhFe^I(acac)(thf)]^? with the aryl and heteroaryl halides has been explored on the basis of DFT calculations.     

Mechanism of the palladium-catalyzed homocoupling of arylboronic acids: key involvement of a palladium peroxo complex

The mechanism of the palladium-catalyzed homocoupling of arylboronic acids ArB(OH)(2) (Ar = 4-Z-C(6)H(4) with Z = MeO, H, CN) in the presence of dioxygen, leading to symmetrical biaryls, has been fully elucidated. The peroxo complex (eta(2)-O(2))PdL(2) (L = PPh(3)), generated in the reaction of dioxygen with the Pd(0) catalyst, was found to play a crucial role. Indeed, it reacts with the arylboronic acid to generate an adduct (coordination of one oxygen atom of the peroxo complex to the oxophilic boron atom of the arylboronic acid) characterized by (31)P NMR spectroscopy and ab initio calculations. This adduct reacts with a second molecule of arylboronic acid to generate trans-ArPd(OH)L(2) complexes. A transmetalation by the arylboronic acid gives trans-ArPdArL(2) complexes. The biaryl is then released in a reductive elimination. This reaction is at the origin of the formation of biaryls as byproducts in palladium-catalyzed Suzuki-Miyaura reactions when they are not conducted under oxygen-free atmosphere.     

Chemical and Electrochemical Asymmetric Dihydroxylation of Olefins in I(2)-K(2)CO(3)-K(2)OsO(2)(OH)(4) and I(2)-K(3)PO(4)/K(2)HPO(4)-K(2)OsO(2)(OH)(4) Systems with Sharpless' Ligand

Iodine-assisted chemical and electrochemical asymmetric dihydroxylation of various olefins in I(2)-K(2)CO(3)-K(2)OsO(2)(OH)(4) and I(2)-K(3)PO(4)/K(2)HPO(4)-K(2)OsO(2)(OH)(4) systems with Sharpless' ligand provided the optically active glycols in excellent isolated yields and high enantiomeric excesses. Iodine (I(2)) was used stoichiometrically for the chemical dihydroxylation, and good results were obtained with nonconjugated olefins in contrast to the case of potassium ferricyanide as a co-oxidant. The potentiality of I(2) as a co-oxidant under stoichiometric conditions has been proven to be effective as an oxidizing mediator in electrolysis systems. Iodine-assisted asymmetric electro-dihydroxylation of olefins in either a t-BuOH/H(2)O(1/1)-K(2)CO(3)/(DHQD)(2)PHAL-(Pt) or t-BuOH/H(2)O(1/1)-K(3)PO(4)/K(2)HPO(4)/(DHQD)(2)PHAL-(Pt) system in the presence of potassium osmate in an undivided cell was investigated in detail. Irrespective of the substitution pattern, all the olefins afforded the diols in high yields and excellent enantiomeric excesses. A plausible mechanism is discussed on the basis of cyclic voltammograms as well as experimental observations.     

Mechanism of the Stille reaction catalyzed by palladium ligated to arsine ligand: PhPdI(AsPh3)(DMF) is the species reacting with vinylstannane in DMF

The kinetics of the reaction of PhPdI(AsPh(3))(2) (formed via the fast oxidative addition of PhI with Pd(0)(AsPh(3))(2)) with a vinyl stannane CH(2)[double bond]CH[bond]Sn(n-Bu)(3) has been investigated in DMF. This reaction (usually called transmetalation step) is the prototype of the rate determining second step of the catalytic cycle of Stille reactions. It is established here that the transmetalation proceeds through PhPdI(AsPh(3))(DMF), generated by the dissociation of one ligand AsPh(3) from PhPdI(AsPh(3))(2). PhPdI(AsPh(3))(DMF) is the reactive species, which leads to styrene through its reaction with CH(2)[double bond]CH[bond]SnBu(3). Consequently, in DMF, the overall nucleophilic attack mainly proceeds via a mechanism involving PhPdI(AsPh(3))(DMF) as the central reactive complex and not PhPdI(AsPh(3))(2). The dimer [Ph(2)Pd(2)(mu(2)-I)(2)(AsPh(3))(2)] has been independently synthesized and characterized by its X-ray structure. In DMF, this dimer dissociates quantitatively into PhPdI(AsPh(3))(DMF), which reacts with CH(2)[double bond]CH[bond]SnBu(3). The rate constant for the reaction of PhPdI(AsPh(3))(DMF) with CH(2)[double bond]CH[bond]SnBu(3) has been determined in DMF for each situation and was found to be comparable.     

Rate and mechanism of the reversible formation of cationic (eta3-allyl)-palladium complexes in the oxidative addition of allylic acetate to palladium(0) complexes ligated by diphosphanes

The oxidative addition of the allylic acetate, CH2=CH-CH2-OAc, to the palladium(o) complex [Pd0(P,P)], generated from the reaction of [Pd(dba)2, with one equivalent of P,P (P,P = dppb = 1,4-bis(diphenylphosphanyl)butane, and P,P = dppf = 1,1'-bis(diphenylphosphanyl)ferrocene), gives a cationic (eta3-allyl)palladium(II) complex, [(eta3-C3H5)Pd(P,P)+]. with AcO as the counter anion. This reaction is reversible and proceeds through two successive equilibria. The overall equilibrium constants have been determined in DMF. Compared with PPh3, the overall equilibrium lies more in favor of the cationic (eta3-allyl)palladium(II) complex when bidentate P,P ligands are considered in the order: dppb > dppf > PPh3. The reaction proceeds via a neutral intermediate complex [(eta2-CH=CH-CHCH2-OAc)Pd0(P,P)], which has been kinetically detected. The rate constants of the successive steps have been determined in DMF by UV spectroscopy and conductivity measurements. The overall complexation step of the Pd0 by the allylic acetate C=C bond is faster than the oxidative addition/ionization step which gives the cationic (eta3-allyl)palladium(II) complex.     

Sunscreen Protection Against Ultraviolet Radiation-induced Pyrimidine Dimers in Mouse Epidermal DNA

Pyrimidine dimers were measured in epidermal DNA of SKH:HRI mice following exposure to solar-simulated UV radiation (SSUV, 290–400 nm) or to UVA (320–400 nm). Mice were exposed to SSUV or UVA after topical application (2 mg/cm²) of vehicle, a UVB absorber (5% 2-ethylhexyl p-methoxycinnamate [2-EHMC]), or a broad-spectrum UVA absorber (5% Mexoryl®SX). The rates of induction of pyrimidine dimers in untreated animals were 5.4 ± 0.57 times 10^-4 (mean ± SEM) and 7.6 ± 0.95 times 10^-6 dimers per 10⁸ Da of epidermal DNA per J/m² of SSUV and UVA, respectively. Topical application of Mexoryl®SX reduced the rate of induction of pyrimidine dimers in SSUV-exposed animals to 4.7 ± 0.44 times 10^-5 dimers per 10⁸ Da per J/m² for a dimer induction protection factor (PF) of 11.5 (5.4 times 10 ⁴/4.7 times 10^-5). The rate of dimer induction in Mexoryl®SX-treated, UVA-ex-posed mice was 0.95 ± 0.2 times 10^-6 dimers per 10⁸ Da per J/m² (PF = 8.0). The 2-EHMC at a concentration of 5% (wt/wt) was significantly less effective than Mexoryl®SX in preventing the induction of pyrimidine dimers in animals exposed to either SSUV or UVA. The rates of dimer induction in 2-EHMC-treated mice were 8.2 ± 1.1 times 10^-5 and 3.8 ± 0.33 times 10^-6 dimers per Da per J/m² of SSUV (PF = 6.6) and UVA (PF = 2.0), respectively. Upon normalizing to the efficacy for edema induction, UVA induced approximately one-fourth the number of pyrimidine dimers per equivalent edematous response when compared to SSUV.     

Pd-catalyzed homocoupling reaction of arylboronic acid: insights from density functional theory

The key step in the mechanism of the Palladium-catalyzed homocoupling of arylboronic acids ArB(OH)(2)(Ar = 4-Z-C(6)H(4) with Z = MeO, H, CN) in the presence of dioxygen, leading to symmetrical biaryls, has been elucidated by using density functional theory. In particular, by starting from the peroxo complex O(2)PdL(2)(L = PPh(3)), generated in the reaction of dioxygen with the Pd(0) catalyst, the fundamental role played by an intermediate formed by coordination of one oxygen atom of the peroxo complex to the oxophilic boron atom of the arylboronic acid has been pointed out. This adduct reacts with a second molecule of arylboronic acid to generate a cis-Ar-Pd(OOB(OH)(2))L(2) complex that can form the stable intermediate trans-Ar-Pd(OH)L(2) (experimentally characterized) through a sequence of hydrolysis and isomerization reactions. All theoretical insights are in agreement and do substantiate the experimentally postulated mechanism. Furthermore, direct comparison of experimental and computed spectroscopic parameters (here, (31)P chemical shifts) allows us to confirm the formation of the intermediate.     

Synchronous photoinitiation of endothelial NO synthase activity by a nanotrigger targeted at its NADPH site

We designed a new nanotrigger to synchronize and monitor an enzymatic activity interacting specifically with the conserved NADPH binding site. The nanotrigger (NT) combines a docking moiety targeting the NADPH site and a chromophore moiety responsive to light excitation for efficient electron transfer to the protein. Specific binding of the nanotrigger to the reductase domain of the endothelial nitric oxide synthase (eNOSred) was demonstrated by competition between NADPH and the nanotrigger on the reduction of eNOSred flavin. A micromolar Ki was estimated. We had monitored initiation of eNOSred activity by ultrafast transient spectroscopy. The transient absorption spectrum recorded at 250 ps fits the expected sum of the reduced and oxidized species, independently obtained by other chemical methods, in agreement with a photoinduced electron transfer from the excited nanotrigger to the flavin moiety of eNOSred. The rate of electron transfer from the excited state of the nanotrigger (NT*) to the protein is estimated to be k(ET) = (7 +/- 2) x 10(9) s(-1) using the decay of oxidized eNOSred-bound nanotrigger compared against prereduced eNOSred or glucose 6-P dehydrogenase as controls. This fast electron transfer bypasses the slow hydride transfer to initiate NOS catalysis as shown by ultrafast kinetics using the eNOSred mutated in the regulatory F1160 residue. The selective targeting of the nanotrigger to NADPH sites should allow controlled initiation of the enzymatic activity of numerous proteins containing an NADPH site.     

Mechanism of the copper-free palladium-catalyzed Sonagashira reactions: multiple role of amines

Amines used as bases in copper-free, palladium-catalyzed Sonogashira reactions play a multiple role. The oxidative addition of iodobenzene with [Pd(0)(PPh(3))(4)] is faster when performed in the presence of amines (piperidine>morpholine). Amines also substitute one ligand L in trans-[PdI(Ph)(L)(2)] (L=PPh(3), AsPh(3)) formed in the oxidative addition. This reversible reaction, which gives [PdI(Ph)L(R(2)NH)], is favored in the order AsPh(3)>PPh(3) and piperidine>morpholine. Two mechanisms are proposed for Sonogashira reactions, depending on the ligand and the amine. When L=PPh(3), its substitution by the amine in trans-[PdI(Ph)(PPh(3))(2)] is less favored than that of the alkyne. A mechanism involving prior coordination of the alkyne is suggested, followed by deprotonation of the ligated alkyne by the amine. When L=AsPh(3), its substitution in trans-[PdI(Ph)(AsPh(3))(2)] by the piperidine is easier than that by the alkyne, leading to a different mechanism: substitution of AsPh(3) by the amine is followed by substitution of the second AsPh(3) by the alkyne to generate [PdI(Ph)(amine)(alkyne)]. Deprotonation of the ligated alkyne by an external amine leads to the coupling product. This explains why the catalytic reactions are less efficient with AsPh(3) than with PPh(3) as ligand.     

Mechanism of the Nickel-Catalyzed Electrosynthesis of Ketones by Heterocoupling of Acyl and Benzyl Halides

Summary.  The mechanism of the nickel-catalyzed electrosynthesis of ketones by heterocoupling of phenacyl chloride and benzyl bromide has been investigated by fast scan rate cyclic voltammetry with [Ni(bpy)²⁺ ₃](BF₄ ⁻)₂ as the catalytic precursor (bpy = 2,2{−}{ bipyridine}). The key step is an oxidative addition of Ni⁰(bpy) (electrogenerated by reduction of the Ni(II) precursor) to PhCH₂Br whose rate constant is found to be 10 times higher than that of PhCH₂COCl. The complex PhCH₂Ni^IIBr(bpy) formed in the oxidative addition is reduced at the potential of the Ni^II/Ni⁰ reduction by a two-electron process which affords an anionic complex PhCH₂Ni⁰(bpy)⁻ able to react with PhCH₂COCl to generate eventually the homocoupling product PhCH₂COCH₂Ph. The formation of the homocoupling product PhCH₂COCOCH₂Ph is prevented because of the too slow oxidative addition of Ni⁰(bpy) to PhCH₂COCl compared to PhCH₂Br. The formation of the homocoupling product PhCH₂CH₂Ph is also prevented because PhCH₂Ni⁰(bpy)⁻ does not react with PhCH₂Br. This explains why the electrosynthesis of the ketone can be performed selectively in a one-pot procedure, starting from an equal mixture of PhCH₂COCl and PhCH₂Br and a nickel catalyst ligated by the bpy ligand. Received June 27, 2000. Accepted July 11, 2000