Measurement of labile Cu in soil using stable isotope dilution and isotope ratio analysis by ICP-MS

Isotope dilution is a useful technique to measure the labile metal pool, which is the amount of metal in soil in rapid equilibrium (<7 days) with the soil solution. This is normally performed by equilibrating soil with a metal isotope, and sampling the labile metal pool by using an extraction (E value), or by growing plants (L value). For Cu, this procedure is problematic for E values, and impossible for L values, due to the short half-life of the ⁶⁴Cu radioisotope (12.4 h), which makes access and handling very difficult. We therefore developed a technique using enriched ⁶⁵Cu stable isotope and measurement of ⁶³Cu/⁶⁵Cu ratios by quadrupole inductively coupled plasma mass spectrometry (ICP-MS) to measure labile pools of Cu in soils using E value techniques. Mass spectral interferences in detection of ⁶³Cu/⁶⁵Cu ratios in soil extracts were found to be minimal. Isotope ratios determined by quadrupole ICP-MS compared well to those determined by high-resolution (magnetic sector) ICP-MS. E values determined using the stable isotope technique compared well to those determined using the radioisotope for both uncontaminated and Cu-contaminated soils.     

Characterization of the pores in hydrous ferric oxide aggregates formed by freezing and thawing

Hydrous ferric oxides (HFO) are efficient sorbents for inorganic and organic pollutants and therefore have great potentials in environmental science and engineering applications. Freezing and thawing of HFO suspensions leads to the formation of dense HFO aggregates. It facilitates the handling and increases the drying rate of HFO. In this study, we used a combination of pycnometry, gas adsorption (N(2) gas, water vapor), and small-angle neutron scattering (SANS) to characterize the porosity and pore size distribution of dense HFO aggregates formed by freezing dialyzed HFO suspensions at -25 degrees C and thawing them at room temperature. The crystallinity of the HFO, which was a 2-line ferrihydrite, was not affected by this treatment. Wet sieving and laser diffraction analysis showed that the dense HFO aggregates had a unimodal size distribution with an average diameter of 235+/-35 microm. Increasing the freezing rate by cooling with liquid N(2) (-196 degrees C) resulted in much smaller aggregates with an average diameter of 20 microm. Adding NaNO(3) electrolyte to the HFO suspensions prior to freezing also resulted in the formation of smaller aggregates. The dense HFO aggregates formed at -25 degrees C had a porosity of 0.73+/-0.02 ll(-1). SANS revealed a unimodal size distribution of pores, with an average pore diameter of 2.0 nm. The diameter of the HFO crystallites was estimated by transmission electron microscopy to be 1.9+/-0.5 nm. Geometrical considerations taking into account the unit particle and average pore size suggest that the crystallites retain 1-2 layers of hydration water during the coagulation induced by freezing. Analysis by N(2) gas adsorption showed that drying the dense HFO aggregates induced a reduction in porosity by about 25% and shifted the pore size distribution to smaller diameters. Rewetting during water vapor adsorption did not induce significant changes of the aggregate structure. The specific surface area of the dry HFO aggregates was between 320 and 380 m(2)g(-1).     

Biosynthetic Production of [N2,1,3,7,9-15N]Guanosine and [1,3,7,9-15N]inosine and conversion into [N6,1,3,7,9-15N]adenosine for structure elucidation of RNA by heteronuclear NMR

A procedure was developed for the biosynthetic preparation of ¹⁵N-labelled guanosine and inosine through the action of a mutant Bacillus subtilis strain. Crude [N²,1,3,7,9-¹⁵N]guanosine and [1,3,7,9-¹⁵N]inosine were isolated from the culture filtrate by precipitation and anion-exchange chromatography (Scheme 1). No cell lysis and no enzymatic degradation was necessary. The per-isobutyrylated derivatives 1 and 2 were isolated from a complex mixture, purified by virtue of their different lipophilicity, and separated in three steps involving normal-and reversed-phase silica-gel chromatography. One litre of complex nutrient medium yielded 8.44 mmol of guanosine derivative and 2.84 mmol of inosine derivative with high average ¹⁵N enrichment (83.5 and 91.9 atom-%, resp.). [N⁶,1,3,7,9-¹⁵N]Adenosine ( 4 ) was obtained from 2′,3′,5′-tri-O-isobutyryl[1,3,7,9-¹⁵N]inosine ( 1 ) through the ammonolysis of its 1,2,4-triazolyl derivative with aqueous ¹⁵NH₃ (Scheme 2).     

Sensitive detection of hydroxymethylcytosine levels in normal and neoplastic cells and tissues

A new sensitive analytical method using capillary electrophoresis with laser induced fluorescence (CE‐LIF) was applied for the simultaneous detection of DNA methylation and hydroxymethylation levels in human cancers of different origin. DNA hydroxymethylation, measured as 5‐hydroxymethylcytosine (5hmC) levels, was decreased in gliomas with mutation in the isocitrate dehydrogenase 1 (IDH1) gene when compared to IDH1‐wildtype gliomas. Independent from IDH1 mutation, 5hmC levels were decreased in lung carcinomas when compared to normal lung tissue. Reduced DNA hydroxymethylation was also observed upon dedifferentiation in cultured murine embryonic fibroblasts. Our data show that reduced DNA hydroxymethylation is related to cellular dedifferentiation and can be detected in various types of cancers, independent from the IDH1 mutation status. Quantitative determination of altered 5hmC levels may therefore have potential as a biomarker linked to cellular differentiation and tumorigenesis.     

Short Syntheses of some ‘Decalin‐1,8‐diones’ and their Derivatives: Breaking the Pretended Symmetry

A cheap synthesis of the so‐called ‘decalin‐1,8‐diones’ started with the conjugate (1,4‐) addition of cyclohex‐2‐en‐1‐one derivatives to the γ‐position of the dilithium derivative (buta‐1,3‐diene‐1,1‐bis(olate)) of crotonic acid. Hydrogenation of these ‘1,4‐γ’ adducts and final cyclization afforded the enol tautomers of decalin‐1,8‐diones. Nucleophilic substitutions at these 3‐oxoenols by NH₃ or primary amines created only monoamino products (namely, 3‐oxoenamines) whose reactions with OPCl₃ yielded dihydro(1,3,2)oxazaphosphinin‐2‐one derivatives. The two regioisomers of a trimethyl‐3‐oxoenamine served as models for the constitutional assignments of the two rapidly interconverting (hence, individually NMR‐invisible), tautomeric trimethyl‐3‐oxoenols. Such methyl substitutions served to break the ‘pretended’ symmetry of ‘decalin‐1,8‐dione’. Hydrazine and 3‐oxoenols furnished oxygen‐free indazole derivatives whose N?H bonds exchanged with t_1/2=ca. 0.00035 s at ca. ?58(9) °C.     

General Synthesis and Physicochemical Characterisation of a Series of Peptide‐Mimic Lysine‐Based Amino‐Functionalised Lipids

A series of novel malonic acid diamides (second generation) with two long hydrophobic alkyl chains and an alkaline polar head group was synthesised and characterised as a new class of amino‐functionalised lipids. These peptide‐mimic lipids are suitable for polynucleotide transfer. The lipids bear a novel backbone consisting of a lysine unit and a malonic acid unit. Six different head‐group structures, which vary in size and number of amino groups that can be protonated, were attached to the backbone structure. Furthermore, different alkyl chains were used to build the lipophilic part (namely tetradecyl, hexadecyl, and oleyl). Phase transitions of the new compounds in aqueous dispersions at pH 10 were analysed and discussed in terms of head group and alkyl chain variations. The shape and size of the formed aggregates of selected lipid dispersions were investigated by dynamic light scattering and transmission electron microscopy.     

Carbon Dynamics on the Molybdenum Carbide Surface during Catalytic Propane Dehydrogenation

The effect of the gas‐phase chemical potential on surface chemistry and reactivity of molybdenum carbide has been investigated in catalytic reactions of propane in oxidizing and reducing reactant mixtures by adding H₂, O₂, H₂O, and CO₂ to a C₃H₈/N₂ feed. The balance between surface oxidation state, phase stability, carbon deposition, and the complex reaction network involving dehydrogenation reactions, hydrogenolysis, metathesis, water‐gas shift reaction, hydrogenation, and steam reforming is discussed. Raman spectroscopy and a surface‐sensitive study by means of in situ X‐ray photoelectron spectroscopy evidence that the dynamic formation of surface carbon species under a reducing atmosphere strongly shifts the product spectrum to the C₃‐alkene at the expense of hydrogenolysis products. A similar response of selectivity, which is accompanied by a boost of activity, is observed by tuning the oxidation state of Mo in the presence of mild oxidants, such as H₂O and CO₂, in the feed as well as by V doping. The results obtained allow us to draw a picture of the active catalyst surface and to propose a structure–activity correlation as a map for catalyst optimization.     

How Strain Affects the Reactivity of Surface Metal Oxide Catalysts

Highly dispersed molybdenum oxide supported on mesoporous silica SBA‐15 has been prepared by anion exchange resulting in a series of catalysts with changing Mo densities (0.2–2.5 Mo atoms nm^?2). X‐ray absorption, UV/Vis, Raman, and IR spectroscopy indicate that doubly anchored tetrahedral dioxo MoO₄ units are the major surface species at all loadings. Higher reducibility at loadings close to the monolayer measured by temperature‐programmed reduction and a steep increase in the catalytic activity observed in metathesis of propene and oxidative dehydrogenation of propane at 8 % of Mo loading are attributed to frustration of Mo oxide surface species and lateral interactions. Based on DFT calculations, NEXAFS spectra at the O‐K‐edge at high Mo loadings are explained by distorted MoO₄ complexes. Limited availability of anchor silanol groups at high loadings forces the MoO₄ groups to form more strained configurations. The occurrence of strain is linked to the increase in reactivity.     

Analysing fluorobenzoate tracers in groundwater samples using liquid chromatography-tandem mass spectrometry. A tool for leaching studies and hydrology

A sensitive LC-MS-MS method for the direct determination and quantification of 15 fluorobenzoic acids (FBAs) was developed. FBAs are used as conservative tracers for hydrological modelling of water flow and in studies of pesticides and other xenobiotic compounds. The use of FBAs is discussed in relation to other tracers (bromide, chloride, uranine). The method covers mono-substituted fluorobenzoic acid, difluorobenzoic acid, trifluorobenzoic acid, and tetrafluorobenzoic acid. The general detection limit in ground water was 1 microg/l using electrospray ionisation and 20 microg/l using atmospheric pressure chemical ionisation. Analysis time was less than 10 min, small sample volumes were needed and no clean-up was required.