Polymorphism of paracetamol

The thermodynamic relationship between crystal modifications of paracetamol was studied by alternative methods. Temperature dependence of saturated vapor pressure for polymorphic modifications of the drug paracetamol (acetaminophen) was mea sured and thermodynamic functions of the sublimation process calculated. Solution calorimetry was carried out for the two modifications in the same solvent. Thermodynamic parameters for sublimation for form I (monoclinic) were found: ΔG _sub²⁹⁸=60.0 kJ mol⁻¹; ΔH _sub²⁹⁸=117.9±0.7 kJ mol⁻¹; ΔS _sub²⁹⁸=190±2 J mol⁻¹ K⁻¹. For the orthorhombic modification (form II), the saturated vapor pressure could only be studied at 391 K. Phase transition enthalpy at 298 K, ΔH _tr²⁹⁸(I→II)=2.0±0.4 kJ mol⁻¹, was derived as the difference between the solution enthalpies of the noted polymorphs in the same solution (methanol). Based on ΔH _tr²⁹⁸ (I→II), differences between temperature dependencies of heat capacities of both modifications and the vapor pressure value of form II at 391 K, the temperature dependence of saturated vapor pressure and thermodynamic sublimation parameters for modification II were also estimated (ΔG _sub²⁹⁸=56.1 kJ mol⁻¹; ΔH _sub²⁹⁸=115.9±0.9 kJ mol⁻¹; ΔS _sub²⁹⁸=200±3 J mol⁻¹ K⁻¹). The results indicate that the modifications are monotropically related, which is in contrast to findings recently reported found by classical thermochemical methods.     

Resonant Raman spectra and first molecular hyperpolarizabilities of strongly charge-transfer molecules

The effect of vibrational structure on the frequency dependence of the first molecular hyperpolarizability of two thiophene-based charge-transfer chromophores is investigated. A time domain formulation is used to express the polarizability. The new expression includes the solvent-induced inhomogeneous distribution of electronic transition frequencies as well as the effect of the motion of solvent molecules that modulates the vibrational and electronic transition frequencies of the nonlinear optical molecule on which the first molecular hyperpolarizability depends. Resonance Raman scattering and one-photon absorption spectra of the chromophores are measured. By simultaneously fitting the experimental one-photon absorption spectrum and Raman cross sections of vibrational lines derived from resonance Raman scattering to a theoretical model, important parameters needed for the calculation of the first molecular hyperpolarizability are obtained. The first molecular hyperpolarizability is calculated as a function of frequency covering both nonresonance and two-photon resonance regions. The calculated result is compared with the measured hyperpolarizability as a function of frequency of the excitation laser. The resonance Raman-based analysis is shown to account reasonably well for the dispersion of the hyperpolarizability of the two charge transfer chromophores.     

Ethylene tetramerization: a new route to produce 1-octene in exceptionally high selectivities

Linear alpha-olefins, such as 1-hexene and 1-octene, are important comonomers in the production of linear low-density polyethylene (LLDPE). The conventional method of producing 1-hexene and 1-octene is by oligomerization of ethylene, which yields a wide spectrum of linear alpha-olefins (LAOs). While there exists several processes for producing 1-hexene via ethylene trimerization, a similar route for the selective production of 1-octene has so far been elusive. We now, for the first time, report an unprecedented ethylene tetramerization reaction that produces 1-octene in selectivities exceeding 70%, using an aluminoxane-activated chromium/((R2)2P)2NR1 catalyst system.     

Characterization of the pores in hydrous ferric oxide aggregates formed by freezing and thawing

Hydrous ferric oxides (HFO) are efficient sorbents for inorganic and organic pollutants and therefore have great potentials in environmental science and engineering applications. Freezing and thawing of HFO suspensions leads to the formation of dense HFO aggregates. It facilitates the handling and increases the drying rate of HFO. In this study, we used a combination of pycnometry, gas adsorption (N(2) gas, water vapor), and small-angle neutron scattering (SANS) to characterize the porosity and pore size distribution of dense HFO aggregates formed by freezing dialyzed HFO suspensions at -25 degrees C and thawing them at room temperature. The crystallinity of the HFO, which was a 2-line ferrihydrite, was not affected by this treatment. Wet sieving and laser diffraction analysis showed that the dense HFO aggregates had a unimodal size distribution with an average diameter of 235+/-35 microm. Increasing the freezing rate by cooling with liquid N(2) (-196 degrees C) resulted in much smaller aggregates with an average diameter of 20 microm. Adding NaNO(3) electrolyte to the HFO suspensions prior to freezing also resulted in the formation of smaller aggregates. The dense HFO aggregates formed at -25 degrees C had a porosity of 0.73+/-0.02 ll(-1). SANS revealed a unimodal size distribution of pores, with an average pore diameter of 2.0 nm. The diameter of the HFO crystallites was estimated by transmission electron microscopy to be 1.9+/-0.5 nm. Geometrical considerations taking into account the unit particle and average pore size suggest that the crystallites retain 1-2 layers of hydration water during the coagulation induced by freezing. Analysis by N(2) gas adsorption showed that drying the dense HFO aggregates induced a reduction in porosity by about 25% and shifted the pore size distribution to smaller diameters. Rewetting during water vapor adsorption did not induce significant changes of the aggregate structure. The specific surface area of the dry HFO aggregates was between 320 and 380 m(2)g(-1).     

Synthesis and anticonvulsant activity of 3H-imidazo[4,5-c]-pyridazine, 1H-imidazo[4,5-d]pyridazine and 1H-benzimidazole analogues of 9-(2-fluorobenzyl)-6-methylamino-9H-purine

The 3H-imidazo[4,5-c]pyridazine, 1H-imidazo[4,5-d]pyridazine, and 1H-benzimidazole analogues of the potent anticonvulsant purine 9-(2-fluorobenzyl)-6-methylamino-9H-purine (1, 78U79) were synthesized and tested for anticonvulsant activity. The 3H-imidazo[4,5-c]pyridazines 8 and 9 were prepared in five stages from 3,4,5-trichloropyridazine (2) . The 1H-imidazolo[4,5-d]pyridazine 15 was synthesized in four stages from 5-[(benzyloxy)methyl]-1,5-dihydro-4H-imidazo[4,5-d] pyridazin-4-one (10a) . The benz-imidazole analogues 18 and 20 were prepared from 2,6-dinitroaniline in three stages. These compounds were one-tenth or less as active as 1 in protecting rats against maximal electroshock-induced seizures.     

Potentiometric titration of milligram quantities of uranium in the presence of iron

A method is described for the potentiometric titration of milligram quantities of the uranium(IV) ion in the presence of iron. This is accomplished by complexing the iron with 1.10-phcnanthroline. The uranium can then be titrated with standard ceric sulfate without interference from the iron.     

Synthesis of a silk-inspired peptide-oligothiophene conjugate

The first example of an oligothiophene-peptide conjugate, which was obtained by solid-phase acylation of a resin-bound silk-inspired oligopeptide sequence with a carboxylic acid functionalized regioregular tetra(3-hexylthiophene) derivative, is reported.     

Preparation of VPS and PVD coatings for metallographic and TEM investigations

The aim of the first part of the paper is to give some advice for the faultless metallographic preparation of vacuum plasma sprayed coatings. Several coating/substrate combinations using metals, alloys and ceramics were investigated to derive some general rules. The second part deals with a preparation technique for cross-sections- of physical vapour deposition coatings. This technique was optimized for TiN and Ti(C, N) coatings on hardmetals which were examined in an analytical transmission electron microscope.     

Aurophilicity-based one-dimensional arrays of gold(I) phenylene-1,3- and -1,4-dithiolates

Phenylene-1,3-dithiol is converted into a trinuclear gold complex by treatment with 1 equiv of [[(Ph(3)P)Au](3)O](+)BF(4)(-). In the product, the phenylene unit bears one gold thiolate and one di(gold)sulfonium function. These components aggregate into one-dimensional arrays through head-to-tail aurophilic contacts between the two functions. In the association process, the Au[bond]S[bond]Au angle of the sulfonium group is opened up to accommodate the incoming gold atom between its metal centers. A similar mode of aggregation is found for the triply aurated biphenylene-4,4'-dithiol obtained using the tri(gold)oxonium salt with tri(p-tolyl)phosphine ligands. Probably for steric reasons, in this oligomerization process, the gold(I) thiolate unit is attached side-on to the digold sulfonium unit with retention of the small Au[bond]S[bond]Au angle. Under similar reaction conditions, and with the same molar ratio of the components, phenylene-1,4-dithiol is converted into the bis-sulfonium salt: 1,4-[[(p-Tol)(3)PAu](2)S](2)C(6)H(4)(BF(4))(2), the dications of which also associate into chains. Along the chains, the phenylene spacers alternate with tetranuclear gold clusters which arise from intimate aggregation of pairs of gold atoms. Together with previous findings, the present results show that gold thiolate (-SAuL) and digold sulfonium functions [-S(AuL)(2)(+)] in proper orientation at an arene unit (alpha-omega) can be considered as "soldering" points which can be used for joining up the molecular units into one-dimensional arrays solely through metal-metal contacts, which appear to be operative even against Coulomb repulsion between cations. The reaction of biphenylene-4,4'-dithiol with 2 equiv of sodium methoxide and [tri(c-hexyl)phosphine]gold chloride gives only neutral digold dithiolate complex 4 which is not associated owing to the steric bulk of the tri(c-hexyl)phosphine ligands.     

Evaluation of PTMSP membranes in achieving enhanced ethanol removal from fermentations by pervaporation

The use of membrane processes for the recovery of fermentation products has been gaining increased acceptance in recent years. Pervaporation has been studied in the past as a process for simultaneous fermentation and recovery of volatile products such as ethanol and butanol. However, membrane fouling and low permeate fluxes have imposed limitations on the effectiveness of the process. In this study, we characterize the performance of a substituted polyacetylene membrane, poly[(l-trimethylsilyl)-l-propyne] (PTMSP), in the recovery of ethanol from aqueous mixtures and fermentation broths. Pervaporation using PTMSP membranes shows a distinct advantage over conventional poly(dimethyl siloxane) (PDMS) membranes in ethanol removal. The flux with PTMSP is about threefold higher and the concentration factor is about twofold higher than the corresponding performance achieved with PDMS under similar conditions. The performance of PTMSP with fermentation broths shows a reduction in both flux and concentration factor relative to ethanol-water mixtures. However, the PTMSP membranes indicate initial promise of increased fouling resistance in operation with cell-containing fermentation broths.