Boosting PLA melt strength by controlling the chirality of co-monomer incorporation

Bio-based and degradable polymers such as poly(lactic acid) (PLA) have become prominent. In spite of encouraging features, PLA has a low melt strength and melt elasticity, resulting in processing and application limitations that diminish its substitution potential vis-a-vis classic plastics. Here, we demonstrate a large increase in zero shear viscosity, melt elasticity, elongational viscosity and melt strength by random co-polymerization of lactide with small amounts, viz. 0.4–10 mol%, of diethylglycolide of opposite chiral nature. These enantiomerically pure monomers can be synthesized using one-step zeolite catalysis. Screening of the ester linkages in the final PLA chains by the ethyl side groups is suggested to create an expanding effect on the polymer coils in molten state by weakening of chain–chain interactions. This effect is suspected to increase the radius of gyration, enabling more chain entanglements and consequently increasing the melt strength. A stronger melt could enable access to more cost-competitive and sustainable PLA-based biomaterials with a broader application window. Amongst others, blow molding of bottles, film blowing, fiber spinning and foaming could be facilitated by PLA materials exhibiting a higher melt strength.

Melt strength improvements of PLA by co-polymerizing lactide with co-monomers of opposite chirality were discovered. Stronger melts can translate in less plastic usage, paving the way towards more sustainable bioplastics with broader applicability.     

Synthesis and application of carbohydrate-derived morpholine amino acids

The synthesis of series of diversely functionalized epsilon-morpholine amino acids (MAAs, 5a-h) starting from an epsilon-sugar amino acid and following a two-step oxidative glycol cleavage/reductive amination strategy, is described. In an alternative synthetic scheme, diastereoisomerically pure delta-MAAs (12a,b) were obtained. Oligopeptides containing MAAs were prepared either by direct incorporation of a MAA building block or by subjecting a fully assembled SAA-containing peptide to the two-step glycol cleavage/reductive amination procedure.     

Grazing incidence-X-ray fluorescence spectrometry for the compositional analysis of nanometer-thin high-kappa dielectric HfO2 layers.

In future microelectronic devices, SiO2 as a gate dielectric material will be replaced by materials with a higher dielectric constant. One such candidate material is HfO2. Thin layers are typically deposited from ligand-containing precursors in chemical vapor deposition (CVD) processes. In the atomic layer deposition (ALD) of HfO2, these precursors are often HfCl4 and H2O. Obviously, the material properties of the deposited films will be affected by residual ligands from the precursors. In this paper, we evaluate the use of grazing incidence--and total reflection-X-ray fluorescence spectrometry (GI-XRF and TXRF) for Cl trace analysis in nanometer-thin HfO2 films deposited using ALD. First, the results from different X-ray analysis approaches for the determination of Hf coverage are compared with the results from Rutherford backscattering spectrometry (RBS). Next, we discuss the selection of an appropriate X-ray excitation source for the analysis of traces within the high-kappa: layers. Finally, we combine both in a study on the accuracy of Cl determinations in HfO2 layers.     

Development,validation and application of a generator for distortion product otoacoustic emissions

The application area of distortion product otoacoustic emissions (DPOAEs) is expanding beyond clinical routines, towards new measurement environments, protocols, wearable hardware and more robust algorithms. To enable systematic assessment of the performance of commercial and prototype OAE equipment under various measurement conditions without a need for recruitment of the test subjects, a DPOAE generator that produces a reliable and stable response is proposed. This article suggests simple design for such generator that is easy to reproduce by third parties. This design uses an approximate model for middle and inner ear dynamics focusing on typical operational conditions. The DPOAE generator is embedded in a head and torso simulator enabling testing for various probe fitting and also residual ear canal volume effects. Measurement of the DPOAE generator response with clinical equipment shows that the response obtained falls within the range of human normative data. It is also shown that the generator is applicable outside the clinical routines and is able to highlight differences in measurements obtained with different clinical OAE measurement devices.     

Core‐shell nanoparticles with hyperbranched poly(arylene‐oxindole) interiors

Core‐shell type star polymers composed of poly(tert‐butyl acrylate) (poly(t‐BuA)) arms and 100% hyperbranched poly(arylene‐oxindole) interiors were synthesized via the “core‐first” method. Atom transfer radical polymerization of t‐BuA initiated by 2‐bromopropionyl terminal groups of the hyperbranched core was applied for the synthesis of the stars. The resultant star structures were characterized by gel permeation chromatography with triple detection. Polymers of molar masses M_n up to 1.68 × 10⁵ g/mol were obtained. The obtained star polymers compared with the linear counterparts of the same molar mass have a much more compact structure in solution. The intrinsic viscosities of the stars are also significantly lower than their linear counterparts. Light scattering experiments were performed to provide information about the size of these macromolecules in solution. Preliminary characterization of the thermal properties of these novel materials is also reported. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1120–1135, 2009     

Investigation of the conformation of hyperbranched poly(arylene oxindole)s using hyper‐Rayleigh scattering

A hyperbranched poly(arylene oxindole), a poly(methacrylate), and a dendrimer, to which the same nonlinear optical chromophore was attached via a small, rigid spacer, were prepared. The difference in hyper‐Rayleigh scattering intensities was measured and compared. From this study, it was concluded that the chromophores, and hence the functional groups in the macromolecule before functionalization, are orientationally correlated in the dendrimer, whereas they are not in the linear and hyperbranched polymer. More in particular, the chromophores in the dendrimer are fixed in a centrosymmetric way because of the globular structure, whereas there is no orientational correlation between the chromophores in linear and hyperbranched polymer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3740–3747, 2009     

Controlled growth of rutile TiO2 by atomic layer deposition on oxidized ruthenium

Crystalline rutile TiO₂ films were grown by atomic layer deposition on oxidized Ru electrodes using a titanium methoxide as the metal precursor and O₃ as the oxidant. A protective layer of ～0.3 nm TiO₂ grown with H₂O as the oxidant was first deposited in order to avoid etching of the Ru bottom electrode by the O₃ used for the growth of the TiO₂ (bulk) layer. Electrical evaluation of the capacitor stacks with TiO₂ as dielectric, RuO₂/Ru and Pt as the bottom and top electrodes respectively, resulted in superior characteristics of the rutile phase as compared to the anatase. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Atomic imaging of nucleation of trimethylaluminum on clean and H2O functionalized Ge(100) surfaces

The direct reaction of trimethylaluminum (TMA) on a Ge(100) surface and the effects of monolayer H(2)O pre-dosing were investigated using ultrahigh vacuum techniques, such as scanning tunneling microscopy (STM), scanning tunneling spectroscopy (STS), and x-ray photoelectron spectroscopy (XPS), and density functional theory (DFT). At room temperature (RT), a saturation TMA dose produced 0.8 monolayers (ML) of semi-ordered species on a Ge(100) surface due to the dissociative chemisorption of TMA. STS confirmed the chemisorption of TMA passivated the bandgap states due to dangling bonds. By annealing the TMA-dosed Ge surface, the STM observed coverage of TMA sites decreased to 0.4 ML at 250?°C, and to 0.15 ML at 450?°C. XPS analysis showed that only carbon content was reduced during annealing, while the Al coverage was maintained at 0.15 ML, consistent with the desorption of methyl (-CH(3)) groups from the TMA adsorbates. Conversely, saturation TMA dosing at RT on the monolayer H(2)O pre-dosed Ge(100) surface followed by annealing at 200?°C formed a layer of Ge-O-Al bonds with an Al coverage a factor of two greater than the TMA only dosed Ge(100), consistent with Ge-OH activation of TMA chemisorption and Ge-H blocking of CH(3) chemisorption. The DFT shows that the reaction of TMA has lower activation energy and is more exothermic on Ge-OH than Ge-H sites. It is proposed that the H(2)O pre-dosing enhances the concentration of adsorbed Al and forms thermally stable Ge-O-Al bonds along the Ge dimer row which could serve as a nearly ideal atomic layer deposition nucleation layer on Ge(100) surface.     

Lead(II) Formate in Rembrandt's Night Watch: Detection and Distribution from the Macro- to the Micro-scale

The Night Watch, painted in 1642 and on view in the Rijksmuseum in Amsterdam, is considered Rembrandt's most famous work. X-ray powder diffraction (XRPD) mapping at multiple length scales revealed the unusual presence of lead(II) formate, Pb(HCOO)₂, in several areas of the painting. Until now, this compound was never reported in historical oil paints. In order to get insights into this phenomenon, one possible chemical pathway was explored thanks to the preparation and micro-analysis of model oil paint media prepared by heating linseed oil and lead(II) oxide (PbO) drier as described in 17^th century recipes. Synchrotron radiation based micro-XRPD (SR-μ-XRPD) and infrared microscopy were combined to identify and map at the micro-scale various neo-formed lead-based compounds in these model samples. Both lead(II) formate and lead(II) formate hydroxide Pb(HCOO)(OH) were detected and mapped, providing new clues regarding the reactivity of lead driers in oil matrices in historical paintings.