Tutorial on estimating the limit of detection using LC-MS analysis,part II: Practical aspects

In part II of this tutorial, the investigated approaches of estimating the limit of detection (LOD) are applied to experimental data from LC-MS measurements. Important practical aspects specific to LC-MS and related to LOD are reviewed. The results of different tests of estimating linearity and scedasticity are compared. LOD estimates obtained with different approaches (for both simple characterization of the analysis method and accurate interpretation of the results) are applied to the data and the obtained values are compared. As a conclusion, a decision tree is proposed for estimating LOD for analytical methods using the LC-MS technique.     

Copolymerisation properties of siloxy‐substituted bis(indenyl)zirconocene catalysts: modified rheological behaviour

The combination of the copolymerisation ability and vinyl end group selectivity of siloxy substitution of ethylene‐bridged bis(indenyl)zirconium dichlorides suggest these catalyst as potential ones for the production of polyethylene containing small amounts of long chain branching. The role of the polymerisation conditions with these highly active catalysts can clearly be seen. Furthermore low contents of multiple branches may occur, even though the probability of attaching several macromonomers into one chain is low. The effect on melt rheological behaviour depends on both the amount of long chain branching and the length of the branch. Moreover the position of the siloxy group is very important. Polymers synthesized with catalysts, where the siloxy group is in position 1, give peculiar rheological behaviour resembling cross‐linked networks although the polymers are completely soluble.     

Changes in the Prevalence of Vocal Symptoms Among Teachers During a Twelve-Year Period

Vocal symptoms and voice disorders among teachers were studied in 1988 using a questionnaire designed to obtain information on six vocal symptoms that had appeared during the past 2 years. Twelve percent of the 478 respondents reported vocal symptoms occurring weekly or more often. The study was repeated using the same questionnaire in 2001. The results of this second study (n=241) indicate that vocal symptoms had increased considerably. Twenty-nine percent of the teachers reported symptoms occurring weekly or more often, and 20% reported two symptoms or more occurring at least once a week, which is significantly more than in 1988. Accordingly, voice disorders are probably a growing problem among teachers. Several factors may explain these increases. In 2001, the teachers complained more often about increases in the size of their classes. Factors that disturbed normal work routines, such as noisy or misbehaving pupils, had also increased significantly. A growing number of misbehaving pupils probably cause increased background noise and stress and, thus, increase the vocal symptoms in teachers.     

Detection of surface bound complement at increasing serum anticoagulant concentrations

Surface mediated immune complement activation can be detected by a variety of antibody utilizing methods such as ELISA, fluorescence- or radiolabelling techniques, QCM, and ellipsometry. In the present work we investigated how the common anticoagulants heparin, dalteparin, fondaparinux and sodium citrate affected the binding of anti-complement factor 3c (anti-C3c) on a model complement activator surface, immobilised IgG, after incubation in human blood serum.

The results show, as expected, that different anticoagulants affect the antibody binding differently. Increasing amounts of heparin, dalteparin and sodium citrate in normal serum resulted in a decreasing anti-C3c binding. The antibody deposition was not sensitive for the fondaparinux concentration. Surprisingly high concentrations of anti-coagulantia were needed to completely eradicate the antibody binding. Experiments in EGTA–serum showed that anticoagulants interfered directly with both the classical and alternative pathways. Control C3a-des arg ELISA measurements show that the lowered antibody surface binding was not a result of complement depletion in serum. Kallikrein generation by hydrophilic glass surfaces was not affected by high anticoagulant concentrations.     

SPE and HPLC/UV of resin acids in colophonium-containing products

A new method, involving SPE and HPLC/UV diode-array detection (DAD), was developed for the quantification of colophonium components in different consumer products, such as cosmetics. Colophonium is a common cause of contact dermatitis since its components can oxidize into allergens on exposure to air. Three different resin acids were used as markers for native and oxidized colophonium, abietic acid (AbA), dehydroabietic acid (DeA), and 7-oxodehydroabietic acid (7-O-DeA). The SPE method, utilizing a mixed-mode hydrophobic and anion exchange retention mechanism, was shown to yield very clean extracts. The use of a urea-embedded C(12) HPLC stationary phase improved the separation of the resin acids compared to common C(18). Concentrations higher than 2 mg/g of both AbA and DeA were detected in wax strips. In this product also 7-O-DeA, a marker for oxidized colophonium, was detected at a level of 28 microg/g. The LODs were in the range of 7-19 microg/g and the LOQs 22-56 microg/g. The method is simple to use and can be applied on many types of technical products, not only cosmetics. For the first time, a method for technical products was developed, which separates AbA from pimaric acid.     

LC–MS/MS Method for Simultaneous Determination of Monoethanol- and Dimethylnitramine in Aqueous Soil Extracts

Monoethanol (MEA)- and dimethyl (DMA)-nitramines are by-products of amine-based post-combustion CO₂ capture (PCCC) processing, and are potentially carcinogenic. The compounds are challenging to measure, also with LC–tandem mass spectrometry (MS/MS), attributed to their high polarity and extreme proneness to matrix effects. In contrast to related methods, the MEA- and DMA-nitramines were simultaneously determined in aqueous soil extracts in less than 10 min using a 1 mm × 150 mm Atlantis^® T3 (3 µm) C18 column. A mobile phase of water/methanol (90/10, v/v) and 2 mM acetic acid allowed for electrospray ionization (ESI) of both analytes [in contrast to the need for both ESI and atmospheric pressure chemical ionization (APCI) in related methods]. Polarity switching electrospray was required for the simultaneous detection of the analytes, and concentration limits of detection (LODs) in the aqueous soil extracts were ≤5.0 µg L^?1 using an injection volume of 20 μL and no prior enrichment step. Matrix effects were compensated for using isotope-labelled internal standards, and satisfactory precision and linearity were obtained (within- and between-day precisions ≤19%, r ² ≥ 0.995 for concentrations up to 500.0 µg L^?1). To avoid signal decrease over time when measuring DMA-nitramine alone, the use of polarity switching was beneficial, in addition to frequent cleaning of the ion transfer capillary. The validated method can be used to determine nitramines in aqueous soil extracts, which is of importance as soil sorption is a determinant of the compounds’ environmental fate.     

Adduct Formation in ESI/MS by Mobile Phase Additives

Adduct formation is a common ionization method in electrospray ionization mass spectrometry (ESI/MS). However, this process is poorly understood and complicated to control. We demonstrate possibilities to control adduct formation via mobile phase additives in ESI positive mode for 17 oxygen and nitrogen bases. Mobile phase additives were found to be a very effective measure for manipulating the formation efficiencies of adducts. An appropriate choice of additive may increase sensitivity by up to three orders of magnitude. In general, sodium adduct [M + Na]⁺ and protonated molecule [M + H]⁺ formation efficiencies were found to be in good correlation; however, the former were significantly more influenced by mobile phase properties. Although the highest formation efficiencies for both species were observed in water/acetonitrile mixtures not containing additives, the repeatability of the formation efficiencies was found to be improved by additives. It is concluded that mobile phase additives are powerful, yet not limiting factors, for altering adduct formation.

Open image in new window

Graphical Abstract ?

     

Normal-mode analysis of the glycine alpha1 receptor by three separate methods

Predicting collective dynamics and structural changes in biological macromolecules is pivotal toward a better understanding of many biological processes. Limitations due to large system sizes and inaccessible time scales have prompted the development of alternative techniques for the calculation of such motions. In this work, we present the results of a normal-mode analysis technique based on molecular mechanics that enables the calculation of accurate force-field based vibrations of extremely large molecules and compare it with two elastic network approximate models. When applied to the glycine alpha1 receptor, all three normal-mode analysis algorithms demonstrate an "iris-like" gating motion. Such gating motions have implications for understanding the effects of anesthetic and other ligand binding sites and for the means of transducing agonist binding into ion channel opening. Unlike the more approximate methods, molecular mechanics based analyses can also reveal approximate vibrational frequencies. Such analyses may someday allow the use of protein dynamics elucidated via normal-mode calculations as additional endpoints for future drug design.     

Aglycone specificity of <Emphasis Type="Italic">Thermotoga neapolitana</Emphasis> β-glucosidase 1A modified by mutagenesis,leading to increased catalytic efficiency in quercetin-3-glucoside hydrolysis

Background  

The thermostable β-glucosidase (TnBgl1A) from Thermotoga neapolitana is a promising biocatalyst for hydrolysis of glucosylated flavonoids and can be coupled to extraction methods using pressurized hot water. Hydrolysis has however been shown to be dependent on the position of the glucosylation on the flavonoid, and e.g. quercetin-3-glucoside (Q3) was hydrolysed slowly. A set of mutants of TnBgl1A were thus created to analyse the influence on the kinetic parameters using the model substrate para-nitrophenyl-β-D-glucopyranoside (pNPGlc), and screened for hydrolysis of Q3.     

Glycerol monooleate-blood interactions

In the present study the initial blood compatibility of glycerol monooleate (GMO)-coated surfaces was evaluated after deposition to surfaces and in bulk. The model surface was silica onto which multiple layers of fibrinogen or human serum albumin (HSA) was immobilized. The protein-coated surfaces were subsequently dip-coated in GMO in ethanol and used for blood plasma and whole blood experiments. The characterization methods included null ellipsometry, scanning electron microscopy, imaging of coagulation, hemolysis test and whole blood coagulation time by free oscillation rheometry. The results showed a GMO film thickness of approximately 350 A (approximately 4 microg/cm(2)) upon dip-coating in ethanolic solution. A major part of the deposited layer detached in aqueous solutions, especially during shear conditions. The coagulation time on GMO was significantly prolonged compared to that on HSA coated silica. Whole blood tests showed that GMO is a very weak hemolytic agent. Deposited GMO detached easily from surfaces upon rinsing or shearing, although a stable layer with undefined phase structure and a thickness of 50-70 A remained on HSA and fibrinogen precoated surfaces. This indicates that GMO has stronger adhesive forces to its substrate compared to the cohesive forces acting within the bulk GMO. The ability of GMO to detach from itself and tentatively form micelles or lipid bilayers when subjected to flowing blood may be of use in extravascular applications. It is concluded that GMO results in weak blood activation, and the material may in spite of this be suitable in selected biomaterial applications, especially as a biosealant and in colloidal dispersions.