Quantum yields for product formation in the 120-133 nm photodissociation of O2

The photodissociation of O(2) in the region from 120-133 nm has been investigated using product imaging. The spectrum in this region is dominated by transitions from the ground state to the first three vibrational levels of the E (3)Sigma(u) (-) state. The O((1)D)+O((3)P) channel is the only product channel observed by product imaging for dissociation at either 124.4 nm or 120.4 nm. The O((1)D(2)) product is aligned in the molecular frame in such a way that its J vector is perpendicular to the relative velocity vector between the O((1)D) and the O((3)P). The variation in the anisotropy of dissociation is approximately predicted by considering transitions on individual lines and then taking into account the coherent excitation of overlapping resonances. At 132.7 nm, both the O((1)D)+O((3)P) and the O((3)P)+O((3)P) channels are observed with branching ratios of 0.40+/-0.08 and 0.60+/-0.09, respectively. At 130.2 nm, the quantum yield for production of O((1)D) is 0.76+/-0.28.     

Kinetic and thermodynamic characterization of the cobalt and manganese oxyhydroxide cores formed in horse spleen ferritin

Horse spleen ferritin (HoSF) containing 800-1500 cobalt or 250-1200 manganese atoms as Co(O)OH and Mn(O)OH mineral cores within the HoSF interior (Co-HoSF and Mn-HoSF) was synthesized, and the chemical reactivity, kinetics of reduction, and the reduction potentials were measured. Microcoulometric and chemical reduction of HoSF containing the M(O)OH mineral core (M = Co or Mn) was rapid and quantitative with a reduction stoichiometry of 1.05 +/- 0.10 e/M forming a stable M(OH)(2) mineral core. At pH 9.0, ascorbic acid (AH(2)), a two-electron reductant, effectively reduced the mineral cores; however, the reaction was incomplete and rapidly reached equilibrium. The addition of excess AH(2) shifted the reaction to completion with a M(3+)/AH(2) stoichiometry of 1.9-2.1, consistent with a single electron per metal atom reduction. The rate of reaction between M(O)OH and excess AH(2) was measured by monitoring the decrease in mineral core absorbance with time. The reaction was first order in each reactant with second-order rate constants of 0.53 and 4.74 M(-1) min(-1), respectively, for Co- and Mn-HoSF at pH 9.0. From the variation of absorbance with increasing AH(2) concentration, equilibrium constants at pH 9.0 of 5.0 +/- 1.9 for Co-HoSF and 2.9 +/- 0.9 for Mn-HoSF were calculated for 2M(O)OH + AH(2) = 2M(OH)(2) + D, where AH(2) and D are ascorbic acid and dehydroascorbic acid, respectively. Consistent with these equilibrium constants, the standard potential for the reduction of Co(III)-HoSF is 42 mV more positive than that of the ascorbic acid reaction, while the standard potential of Mn(III)-HoSF is 27 mV positive relative to AH(2). Fe(2+) in solution with Co- and Mn-HoSF under anaerobic conditions was oxidized to form Fe(O)OH within the HoSF interior, resulting in partial displacement of the Co or Mn by iron.     

Determination of Total Reduced Thiol Levels in Plasma Using a Bromide Substituted Quinone

The exploitation of 2‐bromo‐1,4‐naphthoquinone (NQBr) as a selective redox label for the determination of reduced thiol functionalities (RSH) has been investigated. The system is selective for RSH functionality, giving distinct voltammetric signals for glutathione and cysteine but can also be adapted for broad spectrum thiol detection. Ion chromatographic protocols based on conductimetric detection enable total RSH analysis (protein and monomolecular moieties) within human plasma. Bromide released through the reaction can be easily quantified and integrated within normal IC measurements. The efficacy of the approach has been assessed and the response validated through comparison with the standard colorimetric technique.     

Isospectral points and edges in graph theory

The relationship of isospectral points to symmetrically equivalent points in a graph is described. Many isospectral points are related to symmetrically equivalent verticesvia an equivalence-preserving perturbation. A graph having isospectraledges is examined for clues to assist in finding other such graphs. Two families are found in this manner. Application of equivalence-preserving perturbations to edges that are initially symmetrically equivalent leads to an unlimited number of families of graphs, many with more than one pair of isospectral edges.     

A semi-micro synthesis of selenophene

A semi-micro preparation of selenophene is described which offers a convenient technique for the production of milligram quantities of the heterocycle. Selenophene is synthesized from bis-(trimethylsilyl)-1,3-butadiyne and sodium hydrogen selenide generated in situ from selenium and sodium borohydride in DMF-water. J. Chem. Soc., 14, 1115 (1977)     

Is there a difference between leads and drugs? A historical perspective

To be considered for further development, lead structures should display the following properties: (1) simple chemical features, amenable for chemistry optimization; (2) membership to an established SAR series; (3) favorable patent situation; and (4) good absorption, distribution, metabolism, and excretion (ADME) properties. There are two distinct categories of leads: those that lack any therapeutic use (i.e., "pure" leads), and those that are marketed drugs themselves but have been altered to yield novel drugs. We have previously analyzed the design of leadlike combinatorial libraries starting from 18 lead and drug pairs of structures (S. J. Teague et al. Angew. Chem., Int. Ed. Engl. 1999, 38, 3743-3748). Here, we report results based on an extended dataset of 96 lead-drug pairs, of which 62 are lead structures that are not marketed as drugs, and 75 are drugs that are not presumably used as leads. We examined the following properties: MW (molecular weight), CMR (the calculated molecular refractivity), RNG (the number of rings), RTB (the number of rotatable bonds), the number of hydrogen bond donors (HDO) and acceptors (HAC), the calculated logarithm of the n-octanol/water partition (CLogP), the calculated logarithm of the distribution coefficient at pH 7.4 (LogD(74)), the Daylight-fingerprint druglike score (DFPS), and the property and pharmacophore features score (PPFS). The following differences were observed between the medians of drugs and leads: DeltaMW = 69; DeltaCMR = 1.8; DeltaRNG = DeltaHAC =1; DeltaRTB = 2; DeltaCLogP = 0.43; DeltaLogD(74) = 0.97; DeltaHDO = 0; DeltaDFPS = 0.15; DeltaPPFS = 0.12. Lead structures exhibit, on the average, less molecular complexity (less MW, less number of rings and rotatable bonds), are less hydrophobic (lower CLogP and LogD(74)), and less druglike (lower druglike scores). These findings indicate that the process of optimizing a lead into a drug results in more complex structures. This information should be used in the design of novel combinatorial libraries that are aimed at lead discovery.     

Estrogen-derived steroidal metal complexes: agents for cellular delivery of metal centers to estrogen receptor-positive cells

Targeted cellular delivery of drugs to specific tissues is an important goal in biomedical chemistry. Achieving this requires harnessing and applying molecular-level recognition events prevalent in (or specific to) the desired tissue type. Tissues rich in estrogen receptors (ERs), which include many types of breast cancer, accumulate molecules that have high binding affinities for these receptors. Therefore, molecules that (i) bind to the ER, (ii) have favorable cellular transport properties, and (iii) contain a second functionality (such as a center that may be used for diagnostic imaging or medical therapy) are exciting synthetic targets in the field of drug delivery. To this end, we have prepared a range of metallo-estrogens based on 17alpha-ethynylestradiol and examined their binding to the ER both as isolated receptor and in whole cell assays (ER positive MCF-7 cells). Estrogens functionalized with metal binding units are prepared by palladium-catalyzed cross-coupling reactions and a wide range of metal centers introduced readily. All the compounds prepared and tested exhibit effective binding to the estrogen receptor and are delivered across the cell membrane into MCF-7 cells. In the whole cell assays, despite their monocationic nature, the palladium and platinum complexes prepared exhibit similar (and even enhanced) receptor binding affinities compared to their corresponding neutral free ligands. It is unprecedented for a higher ER binding affinity to be observed for a cationic complex than for its metal-free ligand.     

Cell separations using targeted monoclonal antibodies against overproduced surface proteins

Applied Biochemistry and Biotechnology - The capacity of polystyrene microspheres with immobilized antibodies against type 1 pili ofE. coli was measured. Using pure IgG-type monoclonal antibodies...     

SPECTROSCOPIC STUDIES OF CUTANEOUS PHOTOSENSITIZING AGENTS. XVIII. INDOMETHACIN

Abstract— The photochemistry, photophysics, and photosensitization (Type I and II) of indomethacin (IN) (N-[p-chlorobenzoyl]-5-methoxy-2-methylindole-3-acetic acid) has been studied in a variety of solvents using NMR, high performance liquid chromatography-mass spectroscopy, transient spectroscopy, electron paramagnetic resonance in conjunction with the spin trapping technique, and the direct detection of singlet molecular oxygen (^l O₂) luminescence. Photodecomposition of IN (λ_ex > 330 nm) in degassed or air-saturated benzene proceeds rapidly to yield a major (2; N-[p-chlorobenzoyl]-5-methoxy-2-methyl-3-methylene-indoline) and a minor (3; N-[p-chlorobenzoyl]-5-methoxy-2, 3-dimethyl-indole) decarboxylated product and a minor indoline (5; 1-en-5-methoxy-2-methyl-3-methylene-in-doline), which is formed by loss of the p-chlorobenzoyl moiety. In air-saturated solvents two minor oxidized products 4 (N-[p-chlorobenzoyl]-5-methoxy-2-methylindol-3-aldehyde) and 6 (5-methoxy-2-methyl-indole-3-aldehyde) are also formed. When photolysis was carried out in ¹⁸O₂-saturated benzene, the oxidized products 4 and 6 contained ¹⁸O, indicating that oxidation was mediated by dissolved oxygen in the solvent. In more polar solvents such as acetonitrile or ethanol, photodecomposition is extremely slow and inefficient. Phosphorescence of IN at 77 K shows strong solvent dependence and its emission is greatly reduced as polarity of solvent is increased. Flash excitation of IN in degassed ethanol or acetonitrile produces no transients. A weak transient is observed at 375 nm in degassed benzene, which is not quenched by oxygen. Irradiation of IN (λ_ex > 325 nm) in N₂-gassed C₆H₆ in the presence of 5, 5-dimethyl-1-pyrroline-N-oxide (DMPO) results in the trapping of two carbon-centered radicals by DMPO. One adduct was identified as DMPO/^.COC₆H₄-p-CI, while the other was probably derived from a radical formed during IN decarboxylation. In air-saturated benzene, (hydro) peroxyl and alkoxyl radical adducts of DMPO are observed. A very weak luminescence signal from ¹O₂ at 1268 nm is observed initially upon irradiation (λ_ex= 325 nm) of IN in air-saturated benzene or chloroform. The intensity of this ¹O₂ signal increases as irradiation is continued suggesting that the enhancement in ¹O₂ yield is due to photoproduct(s). Accordingly, when 2 and 3 were tested directly, 2 was found to be a much better sensitizer of ¹O₂ than IN. In air-saturated ethanol or acetonitrile no IN ¹O₂ luminescence is detected even on continuous irradiation. The inability of IN to cause phototoxicity may be related to its photo stability in polar solvents, coupled with the low yield of active oxygen species (¹O₂, O₂^?_-) upon UV irradiation.