Separation of molecular tracers sorbed onto atmospheric particulate matter by flash chromatography

In to order increase sensitivity and to reduce the background induced by matrix effects, a method was developed that uses flash chromatography to separate various compounds present in atmospheric aerosol samples prior to their analysis with different analytical techniques (GC–MS, GC–FID, HPLC). For this purpose, flash chromatography using a 4 g silica gel column crossed by eluent at a flow rate of 20 mL min⁻¹ was used. An eluent with enhanced polarity is needed to separate nonpolar (linear and branched alkanes), semipolar (PAH, nitro-PAH and cholesterol) and polar (methoxyphenols, alkanoic acids, and levoglucosan) compounds. Three combinations of solvents were used: hexane for the nonpolar fraction (F1), toluene/hexane for the semipolar fraction (F2) and dimethylformamide for the polar fraction (F3). The use of different eluents for each fraction allows separation of the sample to be accomplished with good repeatability and satisfying yields [85 ± 5% for F1, 81 ± 8% (PAHs), 89 ± 6% (nitro-PAHs) and 74 ± 7% (cholesterol) for F2 and 79 ± 7% (n-alkanoic acids), 40 ± 11% (methoxyphenols) and 77 ± 6% (levoglucosan) for F3]. The methoxyphenol yields were low due to losses during the concentration/evaporation step. This method was then applied to analyse the organic composition of particles collected at an urban site in Strasbourg (France).     

Direct synthesis of new arylanthranilic acids via a Suzuki cross-coupling reaction from iodoisatins

Direct synthesis of new arylanthranilic acids via a Suzuki cross-coupling reaction with iodoisatins as key intermediates is described. A ‘one pot’ procedure is proposed.     

Adding Value in Production of Multifunctional Polylactide (PLA)–ZnO Nanocomposite Films through Alternative Manufacturing Methods

Due to the added value conferred by zinc oxide (ZnO) nanofiller, e.g., UV protection, antibacterial action, gas-barrier properties, poly(lactic acid) (PLA)–ZnO nanocomposites show increased interest for utilization as films, textile fibers, and injection molding items. The study highlights the beneficial effects of premixing ZnO in PLA under given conditions and its use as masterbatch (MB), a very promising alternative manufacturing technique. This approach allows reducing the residence time at high processing temperature of the thermo-sensitive PLA matrix in contact of ZnO nanoparticles known for their aptitude to promote degradation effects onto the polyester chains. Various PLA–ZnO MBs containing high contents of silane-treated ZnO nanoparticles (up to 40 wt.% nanofiller specifically treated with triethoxycaprylylsilane) were produced by melt-compounding using twin-screw extruders. Subsequently, the selected MBs were melt blended with pristine PLA to produce nanocomposite films containing 1–3 wt.% ZnO. By comparison to the more traditional multi-step process, the MB approach allowed the production of nanocomposites (films) having improved processing and enhanced properties: PLA chains displaying higher molecular weights, improved thermal stability, fine nanofiller distribution, and thermo-mechanical characteristic features, while the UV protection was confirmed by UV-vis spectroscopy measurements. The MB alternative is viewed as a promising flexible technique able to open new perspectives to produce more competitive multifunctional PLA–ZnO nanocomposites.     

Specificity and Origin of the Stability of the Sr Isotopic Ratio in Champagne Wines

The ⁸⁷Sr/⁸⁶Sr ratio of 39 Champagnes from six different brands, originating from the whole “Appellation d’Origine Contrôlée” (AOC) Champagne was analyzed to establish a possible relation with the geographical origin. Musts (i.e., grape juice) and base wines were also analyzed to study the evolution of the Sr isotopic ratio during the elaboration process of sparkling wine. The results demonstrate that there is a very homogeneous Sr isotopic ratio (⁸⁷Sr/⁸⁶Sr = 0.70812, n = 37) and a narrow span of variability (2σ = 0.00007, n = 37). Moreover, the Sr concentrations in Champagnes have also low variability, which can be in part explained by the homogeneity of the bedrock in the AOC Champagne. Measurements of the ⁸⁷Sr/⁸⁶Sr ratio from musts and base wines show that blending during Champagne production plays a major role in the limited variability observed. Further, the ⁸⁷Sr/⁸⁶Sr of the musts were closely linked to the ⁸⁷Sr/⁸⁶Sr ratio of the vineyard soil. It appears that the ⁸⁷Sr/⁸⁶Sr of the product does not change during the elaboration process, but its variability decreases throughout the process due to blending. Both the homogeneity of the soil composition in the Champagne AOC and the blending process during the wine making process with several blending steps at different stages account for the unique and stable Sr isotopic signature of the Champagne wines.     

Analysis of uncertainties affecting the Monte Carlo simulation of a neutron multiplicity counter

When applying numerical simulation to physical problems it is important to be able to clearly understand the quality that can be reached and the uncertainty associated with the modelling. In this paper we will deal with the Monte Carlo simulation of neutron coincidence and multiplicity counters. These instruments are intensively used in nuclear safeguards for the measurement and verification of the mass of fissile materials in nuclear installations. Their numerical simulation, either for detector design or for numerical calibration, is now used more and more frequently as support to inspections.Several benchmark exercises have been organised in order to assess the capabilities of Monte Carlo simulation to correctly predict realistic practical cases in neutron coincidence and multiplicity counting. Nevertheless most of them allowed reaching conclusions only on the overall uncertainties associated to the modelling through the comparison between calculated and measured integral data.In this paper we aim to analyse more deeply the sources of these uncertainties, separating the different possible causes and analysing parametrically the individual factors. We will include influencing factors deriving from the physical model of the detector, of the acquisition electronics, of the sample and from the nuclear data. The final total uncertainties are consistent with the results of the integral benchmarks.     

Strain-induced yielding in bubble clusters

We study how shearing clusters of two or four bubbles induces bubble separation or topological rearrangement. The critical deformation at which this yielding occurs is measured as a function of shear rate, liquid composition, and liquid content in the cluster. We establish a geometrical yield criterion in the quasistatic case on the basis of these experimental data as well as simulations. In the dynamic regime, the deformation where the cluster yields increases with the strain rate, and we derive a scaling law describing this phenomenon based on the dynamical inertial rupture of the liquid meniscus linking the two bubbles. Our experiments show that the same scaling law applies to two- and four-bubble clusters.     

Structural diversity and versatility for organoaluminum complexes supported by mono- and di-anionic aminophenolate bidentate ligands

The present contribution describes the synthesis and structural characterization of structurally diverse organoaluminum species supported by variously substituted aminophenolate-type ligands: these Al complexes are all derived from the reaction of AlMe₃ with aminophenols 2-CH₂NH(R)-C₆H₃OH (1a, R = mesityl (Mes); 1b, R = 2,6-di-isopropylphenyl (Diip)) and 2-CH₂NH(R)-4,6-^tBu₂-C₆H₂OH (1c, R = Mes; 1d, R = Diip). The low temperature reaction of AlMe₃ with 1a–b readily affords the corresponding Al dimeric species [μ-η¹,η¹-N,O-{2-CH₂NH(R)-C₆H₄O}]₂Al₂Me₄ (2a–b), consisting of twelve-membered ring aluminacycles with two μ-η¹,η¹-N,O-aminophenolate units, as determined by X-ray crystallographic studies. Heating a toluene solution of 2a (80 °C, 3 h) affords the quantitative and direct formation of the dinuclear aluminium complex Al[η²-N; μ,η²-O-{2-CH₂N(Mes)-C₆H₄O}](AlMe₂) (4a) while species 2b, under the aforementioned conditions, affords the formation of the Al dimeric species [η²-N,O-{2-CH₂N(Dipp)-C₆H₄O}AlMe]₂ (3b), as deduced from X-ray crystallography for both 3b and 4a. In contrast, the reaction of bulky aminophenol pro-ligands 1c–d with AlMe₃ afford the corresponding monomeric Al aminophenolate chelate complexes η²-N,O-{2-CH₂NH(R)-4,6-^tBu₂-C₆H₂O}AlMe₂ (5c–d; R = Mes, Diip; Scheme 3) as confirmed by X-ray crystallographic analysis in the case of 5d. Subsequent heating of species 5c–d yields, via a methane elimination route, the corresponding Al-THF amido species η²-N,O-{2-CH₂N(R)-4,6-^tBu₂-C₆H₂O}Al(Me)(THF) (6c–d; R = Mes, Diip). Compounds 6c–6d, which are of the type {X₂}Al(R)(L) (L labile), may well be useful as novel well-defined Lewis acid species of potential use for various chemical transformations. Overall, the sterics of the aminophenol backbone and, to a lesser extent, the reaction conditions that are used for a given ligand/AlMe₃ set essentially govern the rather diverse “structural” outcome in these reactions, with a preference toward the formation of mononuclear Al species (i.e. species 5c–d and 6c–d) as the steric demand of the chelating N,O-ligand increases.     

Efficient and simple synthesis of 3-aryl-1H-pyrazoles

Efficient preparation of 3-aryl-1H-pyrazoles by reaction of 1-protected-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-1H-pyrazoles with (het)aryl halides is described. The choice of THP protecting group is discussed.     

Photoreversible DNA condensation using light-responsive surfactants

A means to control DNA compaction with light illumination has been developed using the interaction of DNA with a photoresponsive cationic surfactant. The surfactant undergoes a reversible photoisomerization upon exposure to visible (trans isomer, more hydrophobic) or UV (cis isomer, more hydrophilic) light. As a result, surfactant binding to DNA and the resulting DNA condensation can be tuned with light. Dynamic light scattering (DLS) measurements were used to follow lambda-DNA compaction from the elongated-coil to the compact globular form as a function of surfactant addition and light illumination. The results reveal that compaction occurs at a surfactant-to-DNA base pair ratio of approximately 7 under visible light, while no compaction is observed up to a ratio of 31 under UV light. Upon compaction, the measured diffusion coefficient increases from a value of 0.6 x 10(-8) cm2/s (elongated coil with an end-to-end distance of 1.27 microm) to a value of 1.7 x 10(-8) cm2/s (compact globule with a hydrodynamic radius of 120 nm). Moreover, the light-scattering results demonstrate that the compaction process is completely photoreversible. Fluorescence microscopy with T4-DNA was used to further confirm the light-scattering results, allowing single-molecule detection of the light-controlled coil-to-globule transition. These structural studies were combined with absorbance and fluorescence spectroscopy of crystal violet in order to elucidate the binding mechanism of the photosurfactant to DNA. The results indicate that both electrostatic and hydrophobic forces are important in the compaction process. Finally, a DNA-photosurfactant-water phase diagram was constructed to examine the effects of both DNA and surfactant concentration on DNA compaction. The results reveal that precipitation, which occurs during the latter stages of condensation, can also be reversibly controlled with light illumination. The combined results clearly show the ability to control the interaction between DNA and the complexing agent and, therefore, DNA condensation with light.