An Electron‐Rich Cyclic (Alkyl)(Amino)Carbene on Au(111), Ag(111), and Cu(111) Surfaces

The structural properties and binding motif of a strongly σ‐electron‐donating N‐heterocyclic carbene have been investigated on different transition‐metal surfaces. The examined cyclic (alkyl)(amino)carbene (CAAC) was found to be mobile on surfaces, and molecular islands with short‐range order could be found at high coverage. A combination of scanning tunneling microscopy (STM), X‐ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations highlights how CAACs bind to the surface, which is of tremendous importance to gain an understanding of heterogeneous catalysts bearing CAACs as ligands.     

Influence of glass transition temperature of crosslinked unsaturated polyester resin/styrene formulations on the final conversion after an isothermal curing at 100°C

SMC (sheet molding compound) is a composite based on fibers‐reinforced unsaturated polyester (UP) resin molded usually at 140°C to 170°C under a pressure of 60 to 100 bars. In order to develop new SMC formulations that can be molded at lower temperature (100°C) for economic and environmental reasons, the formulation of the composite had to be completely modified, both to allow a rapid reaction at 100°C, but also to avoid a vitrification phenomenon due to the fact that the glass transition temperature (Tg) of the SMC parts becomes, during the molding process, higher than the mold temperature. In this paper, the relation between the molding temperature, the glass transition temperature, and the final conversion of UP resin/styrene formulations has been underlined. The Tg of the cured resin was decreased by two different ways. The first way involved the reduction of the crosslinking density of the UP resin by using a blend of two resins, a pure maleic and a more flexible one. This blend allows to adjust the Tg over a temperature range from 197°C (Tg of the pure UP resin) to 75°C (Tg of the pure flexible resin). The second way consisted in the addition of butyl methacrylate (BuMA), a reactive plasticizer, to the formulation, allowing a decrease of the final material's Tg from 197°C to 130°C by replacing 35 wt% of styrene by BuMA. These two methods allow to obtain a final conversion of 99% after 8 minutes of molding at 100°C.     

NMR Signatures of the Active Sites in Sn‐β Zeolite

Dynamic nuclear polarization surface enhanced NMR (DNP‐SENS), Mössbauer spectroscopy, and computational chemistry were combined to obtain structural information on the active‐site speciation in Sn‐β zeolite. This approach unambiguously shows the presence of framework Sn^IV‐active sites in an octahedral environment, which probably correspond to so‐called open and closed sites, respectively (namely, tin bound to three or four siloxy groups of the zeolite framework).     

Lab‐on‐a‐Chip Reactor Imaging with Unprecedented Chemical Resolution by Hadamard‐Encoded Remote Detection NMR

The development of microfluidic processes requires information‐rich detection methods. Here we introduce the concept of remote detection exchange NMR spectroscopy (RD‐EXSY), and show that, along with indirect spatial information extracted from time‐of‐flight data, it provides unique information about the active regions, reaction pathways, and intermediate products in a lab‐on‐a‐chip reactor. Furthermore, we demonstrate that direct spatial resolution can be added to RD‐EXSY efficiently by applying the principles of Hadamard spectroscopy.     

A Membraneless Glucose/O2 Biofuel Cell Based on Pd Aerogels

In this study, we introduce the first membraneless glucose/O₂ biofuel cell using Pd‐based aerogels as electrode materials. The bioanode was fabricated with a coimmobilized mediator and glucose oxidase for the oxidation of glucose, in which ferrocenecarboxylic acid was integrated into a three‐dimensional porous beta‐cyclodextrin‐modified Pd aerogel to mediate the bioelectrocatalytic reaction. Bilirubin oxidase and Pd–Pt alloy aerogel were confined to an electrode surface, which realized the direct bioelectrocatalytic function for the reduction of O₂ to H₂O with a synergetic effect at the biocathode. By employing these two bioelectrodes, the assembled glucose/O₂ biofuel cell showed a maximum power output of 20 μW cm^?2 at 0.25 V.     

Methods to ease the release of thin polydimethylsiloxane films from difficult substrates

Silicone elastomers are used as dielectric electroactive polymers for making actuators, generators, sensors, and as artificial muscles in medical applications. Current requirements in the actuator manufacturing put a strict limitation on the thickness of the elastomers, such that a maximum permissible thickness is around 25–50 µm. The relatively small Young's modulus for these elastomers is a requirement for actuation capabilities. However, peeling and release of such films during manufacture processes are very difficult. To ease the release of the films, techniques such as the use of release agents like surfactants and detergents, incorporating resins in the silicone matrix and grafting/adding low surface energy functionalities to the silicone elastomer have been tested. The methods used are required not to interfere with the Young's modulus and the dielectric permittivity in a negative way. Polysorbate‐20, a non‐ionic surfactant, fulfills all requirements and gives the lowest peel forces for the films. Copyright © 2013 John Wiley & Sons, Ltd.     

Characterization of New Specific Copper Chelators as Potential Drugs for the Treatment of Alzheimer’s Disease

The non‐controlled redox‐active metal ions, especially copper, in the brain of patients with Alzheimer disease (AD) should be considered at the origin of the intense oxidative damage in the AD brain. Several bis(8‐aminoquinoline) ligands, such as 1 and PA1637, are able to chelate Cu²⁺ with high affinity, and are specific chelators of copper with respect to iron and zinc. They are able to efficiently extract Cu²⁺ from a metal‐loaded amyloid. In addition, these tetradentate ligands are specific for the chelation of Cu²⁺ compared with Cu⁺. Consequently, the copper ion is easily released from the bis(8‐aminoquinoline) ligand under reductive conditions, and can be trapped again by a protein having some affinity for copper such as human serum albumin (HSA) proteins. In addition, the copper is not efficiently released from [Cu(CQ)₂] in reductive conditions. The catalytic production of H₂O₂ by [Cu²⁺‐Aβ_1?28]/ascorbate is inhibited in vitro by the bis(8‐aminoquinoline) 1 , suggesting that 1 should be able to play a protective role against oxidative damages induced by copper‐loaded amyloids.     

Unusual behaviour of pyridinylboronic acids in the Petasis boronic Mannich reaction

The implementation of the Petasis boronic Mannich reaction in pyridine series allowed us to obtain original compounds whose structure was investigated and determined a stable complex (1:1) of dioxaborolanone and amine.     

Stereocontrolled synthesis and cycloaddition of 1,2,4-trioxygenated 1,3-dienes

A new stereocontrolled synthetic pathway to 1,2,4-trioxygenated 1,3-dienes from pyruvic aldehyde dimethyl acetal (14a) is described. Reacting the cyclohexylamine-derived imine of this starting material with chloroalkyl ethers under basic conditions affords ketoacetals 18-20, which were then transformed into eight different enoxysilanes 12. A delta-elimination triggered by tert-butyllithium yields 1,2,4-trioxygenated dienes 13. Increasing the bulkiness of the silyloxy group or that of the acetal moiety leads stereoselectively to the (1E,3E) or (1Z,3E) isomers of 13, respectively. Hyperbaric [4 + 2] cycloadditions between 13 (13c, 13d, 13g) and N-methylmaleimide or methyl- and phenylacrylates give access to the expected cycloadducts with fine stereo- and regiocontrol.