Simultaneous determinations of a monofluorinated imidazo[1, 5-a] [1, 4] benzodiazepine and the corresponding benzophenone as a function of pH and in aqueous formulations by 19F nuclear magnetic resonance spectrometry

8-Chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1, 5-a] [1, 4 ]benzodiazepine (called “midazolam”) exists in equilibrium with the corresponding benzophenone (the“open-Mng form”). The two compounds were determined simultaneously as a function of pH with ¹⁹F-n.m.r. spectrometry. In a unique application of ¹⁹F-n.m.r. spectrometry, the compounds are determined simultaneously in aqueous dosage forms without the need for sample preparation. The optimum signal-to-noise ratio for the major compound for the lowest concentration of sample used (≈ 1 mg ml^-1) was 200:1 for 3000 scans. This was obtained by partial proton decoupling and exponential multiplication of the free induction decay with a line-broadening parameter of 12 Hz. Quantitative results are presented with a standard deviation of < 2.0% in the mean ratio of the two compounds. The results are also compared with those obtained by the spectrophotometric fluorescamine method. Advantages of the ¹⁹F-n.m.r. technique in this determination are discussed.     

A general organocatalyst for direct alpha-functionalization of aldehydes: stereoselective C-C, C-N, C-F, C-Br, and C-S bond-forming reactions. Scope and mechanistic insights

The development of a general organocatalyst for the alpha-functionalization of aldehydes, via an enamine intermediate, is presented. Based on optically active alpha,alpha-diarylprolinol silyl ethers, the scope and applications of this catalyst for the stereogenic formation of C-C, C-N, C-F, C-Br, and C-S bonds are outlined. The reactions all proceed in good to high yields and with excellent enantioselectivities. Furthermore, we will present mechanistic insight into the reaction course applying nonlinear effect studies, kinetic resolution, and computational investigations leading to an understanding of the properties of the alpha,alpha-diarylprolinol silyl ether catalysts.     

Disorder effects in Mn12–acetate at 83 K

The structure of hexadeca‐μ‐acetato‐tetra­aqua­dodeca‐μ₃‐oxo‐dodecamanganese bis(acetic acid) tetrahydrate, [Mn₁₂O₁₂(CH₃COO)₁₆(H₂O)₄]·2CH₃COOH·4H₂O, known as Mn₁₂–acetate, has been determined at 83 (2) K by X‐ray diffraction methods. The fourfold (S₄) molecular symmetry is disrupted by a strong hydrogen‐bonding interaction with the disordered acetic acid mol­ecule of solvation, which displaces one of the acetate ligands in the cluster. Up to six Mn₁₂ isomers are potentially present in the crystal lattice, which differ in the number and arrangement of hydrogen‐bonded acetic acid mol­ecules. These results considerably improve the structural information available on this molecular nanomagnet, which was first synthesized and characterized by Lis [Acta Cryst. (1980), B 36 , 2042–2046].     

In situ determination of adsorption kinetics of proteins in a finite bath

A method for fast in situ measurement of adsorption kinetics based on a finite bath was developed. We modified the conventional finite bath by replacing the external loop by a dip probe which enables in situ measurement of the concentration change in the contactor. Deposition of adsorbent particles on the reflection surface of the dip probe compromised measurements. Different membranes, a polyamide, a polypropylene and a nylon membrane were tested to protect the internal reflection surface of the dip probe from fouling with adsorbent particles. The nylon membrane provided efficient protection and high mass transfer evaluated by response time experiments. Unspecific adsorption of the model protein on the membrane could also be excluded. To corroborate the measurements of the dip probe the results were compared to a conventional finite bath and to a shallow-bed. The uptake curves for human polyclonal IgG at different concentrationes (0.1-3 g/l) on rProtein A Sepharose FF and MabSelect were used as model system. The effective diffusion coefficients were determined using a pore diffusion model. These values were in good agreement for all methods.     

Synthesis, biochemical properties and molecular modelling studies of organometallic specific estrogen receptor modulators (SERMs), the ferrocifens and hydroxyferrocifens: evidence for an antiproliferative effect of hydroxyferrocifens on both hormone-dependent and hormone-independent breast cancer cell lines

A series of ferrocene derivatives based upon the structure of the antiestrogenic drug tamoxifen or of its active metabolite hydroxytamoxifen has been prepared and named by analogy ferrocifens and hydroxyferrocifens. This series includes 1-[4-(O(CH(2))(n)NMe(2))phenyl]-1-phenyl-2-ferrocenyl-but-1-ene and 1-[4-(-O(CH(2))(n)NMe(2))phenyl]-1-(4-hydroxyphenyl)-2-ferrocenyl-but-1-ene, with n=2, 3, 5 and 8, and 1-[4-(-O(CH(2))(2)NMe(2))phenyl]-1-(4-hydroxyphenyl)-2-ferrocenylethene. Most of these molecules have been synthesised by McMurry cross-coupling of the appropriate ketones, except for the ethene complexes, which were prepared by a four-step reaction sequence starting from the ferrocenylacetic acid. All these compounds were obtained as mixtures of Z and E isomers. The isomers were separated in the cases of the ferrocenyl derivatives of tamoxifen and hydroxytamoxifen (n=2). No isomerisation of the Z and E isomers occurred in DMSO after one day, while a 50:50 mixture of the isomers was obtained within one hour in chloroform. The X-ray structure of (E)-1-[4-(-O(CH(2))(2)NMe(2))phenyl]-1-(4-hydroxyphenyl)-2-ferrocenyl-but-1-ene has been determined. The relative binding affinity (RBA) values of the hydroxyferrocifens for the estrogen receptor alpha (ERalpha) was good to moderate, with values decreasing progressively with the length of the basic chain. The RBA values found for the estrogen receptor beta (ERbeta) are equal to or slightly less than those found for the alpha form. The lipophilicity of the hydroxyferrocifens are superior to the values found for estradiol and increase with lengthening of the chain. The antiproliferative effects of the four hydroxyferrocifens with n=2, 3, 5 and 8 were studied on four breast cancer cell lines (MCF7, MDA-MB231, RTx6 and TD5) possessing different levels of ERalpha. On MCF7 cells containing high levels of ERalpha, hydroxyferrocifens behave as antiestrogens. At a molarity of 1 microM the effect is close to that of hydroxytamoxifen (used for reference) when n=2 or 5, more marked when n=3, and weaker when n=8. Ferrocene alone has no effect. For the MDA-MB231 cells, classed as a hormone-independent breast cancer cell line, on the other hand, the hydroxyferrocifens show remarkable antiproliferative behaviour while the hydroxytamoxifen is completely inactive. Hydroxyferrocifens therefore show the unique property of being active both on hormone-dependent and on hormone-independent breast cancer cell lines. The molecular modelling study provides some clues for understanding of the antagonist effect of these molecules, while an additional cytotoxic effect due to the vectorised ferrocenyl unit is revealed in some occasions.     

Synthesis of titanium(IV) guanidinate complexes and the formation of titanium carbonitride via low-pressure chemical vapor deposition

The mono(guanidinato) complex [Ti(NMe2)2Cl{i-PrNC[N(SiMe3)2]N-i-Pr}] (1) was prepared by reaction of [Ti(NMe2)2Cl2] with 1 or 2 equiv of the lithium guanidinate salt [Li{i-PrNC[N(SiMe3)2]N-i-Pr}]. Compound 1 has been characterized by X-ray crystallography. Treatment of TiCl4 with 2 equiv of [Li{i-PrNC[N(SiMe3)2]N-i-Pr}] resulted in the formation of dark red crystals. X-ray crystallography showed that these crystals consist of a 70:30 mixture of two bis(guanidinato) complexes, namely, [TiCl2{i-PrNC[N(SiMe3)2]N-i-Pr}{i-PrNC(N=CMe2)N-i-Pr}] (2) and [TiCl2{i-PrNC[N(SiMe3)2]N-i-Pr}{i-PrNC[N(H)-i-Pr]N-i-Pr}] (3). Both compounds 2 and 3 possess a transformed guanidinate ligand. Low-pressure chemical vapor deposition of either compound 1 or [TiCl2{i-PrNC(NMe2)N-i-Pr}] (4) at 600 degrees C results in thin films of titanium carbonitride.     

The cell-penetrating peptide TAT(48-60) induces a non-lamellar phase in DMPC membranes.

Cell-penetrating peptides (CPPs) are short polycationic sequences that can translocate into cells without disintegrating the plasma membrane. CPPs are useful tools for delivering cargo, but their molecular mechanism of crossing the lipid bilayer remains unclear. Here we study the interaction of the HIV-derived CPP TAT (48-60) with model membranes by solid-state NMR spectroscopy and electron microscopy. The peptide induces a pronounced isotropic (31)P NMR signal in zwitterionic DMPC, but not in anionic DMPG bilayers. Octaarginine and to a lesser extent octalysine have the same effect, in contrast to other cationic amphiphilic membrane-active peptides. The observed non-lamellar lipid morphology is attributed to specific interactions of polycationic peptides with phosphocholine head groups, rather than to electrostatic interactions. Freeze-fracture electron microscopy indicates that TAT(48-60) induces the formation of rodlike, presumably inverted micelles in DMPC, which may represent intermediates during the translocation across eukaryotic membranes.     

First C-C bond formation in the Pauson-Khand reaction: Influence of carbon-carbon triple bond polarization on regiochemistry: A density functional theory study

The influence of carbon-carbon triple bond polarization on the regiochemistry of the Pauson-Khand reaction has been studied with the B3LYP functional. The regiochemistry determining step of this reaction, i.e., olefin insertion leading to cobaltacycle formation, has been examined with ethylene as the olefin and propyne, methyl 2-butynoate, and methyl propiolate as the acetylenes. From this study, it has been concluded that, in absence of overwhelming steric effects of an acetylene substituent, the regiochemistry is influenced by the polarization of the acetylenic bond, which arises from the different substituents. The initial C-C bond is preferentially formed with the acetylenic carbon that has the greater electron density: with propyne, this leads to a cyclopentenone having the methyl group in the α-position; with methyl 2-butynoate, to a cyclopentenone with the CO₂Me in the β-position; with methyl propiolate, which is virtually unpolarized in the complex, to a cyclopentenone with the CO₂Me in the α-position (a result of steric effects). These theoretical results are concordant with those observed experimentally with norbornene. The question of axial versus equatorial reactive positions for the coordinated olefin is also addressed and a kinetic simulation is presented.     

Determination of Formation Regions of Titanium Phosphates; Determination of the Crystal Structure ofβ-Titanium Phosphate, Ti(PO4)(H2PO4), from Neutron Powder Data

The formation region of the various types of layered titanium hydrogen phosphate hydrates was investigated. The materials were prepared by hydrothermal methods, treating amorphous titanium phosphate with phosphoric acid (8 to 16M) in the temperature range 175 to 250°C. The materials obtained were:α-Ti(HPO₄)₂·H₂O,γ-Ti(PO₄)(H₂PO₄)·2H₂O, and its anhydrous formβ-Ti(PO₄)(H₂PO₄). The structure ofβ-Ti(PO₄)(H₂PO₄) has been determined by Rietveld powder refinement of high resolution neutron diffraction data. The structure is refined in the monoclinic space groupP2₁/n(No. 14). The unit cell parameters are:a=18.9503(4) Å,b=6.3127(1) Å,c=5.1391(1) Å,β=105.366(2)°;Z=4. The final agreement factors were:R_p=2.9% andR_wp=3.8%. The structure ofβ-Ti(PO₄)(H₂PO₄) is built from TiO₆octahedra linked together by tertiary phosphate (PO₄) and dihydrogen phosphate ((OH)₂PO₂) tetrahedra. The layers are held together by hydrogen bonds.