EPR study on ligand-exchange reaction between bis(diethyldiselenocarbamato)copper(II) and some bis(acetylacetonato)copper(II) complexes

The paper is a study on the formation and properties of mixed-chelate copper(II) complexes, in which one ligand is strongly covalently bound diselenocarbamate (dsc), and the other belongs to a series of differently substituted acetylacetonates (acac), all forming weak covalent bonds. Thenoyltrifluoro- and trifluoro- substituted acetylacetonates only partly form mixed-chelate complexes, stable in toluene, benzene or dichloromethane, but gradually decomposing in chloroform or carbontetrachloride by analogy with Cu(Et(2)dsc)(2) behavior in these solvents. Hexafluoro-acetylacetonato copper(II) completely turns into a mixed-chelate Cu(dsc)(hfacac), which remains unchanged for more than 8 months of monitoring in all solvents used. The stability of Cu(dsc)(hfacac) is attributed to the reduced remaining negative charge on selenium atom embarrassing the formation of weak D-A complex with haloalkanes. The obtained EPR parameters suggest significant lowering of the contribution of the 4s AO of copper(II) in the mixed-chelate complexes. It is shown that Cu(acac)(2) does not react with Cu(Et(2)dsc)(2).     

Capillary electrochromatography without external pressure assistance. Use of packed columns with a monolithic inlet frit

A fused silica capillary column was packed with RP(18) silica stationary phase entrapping the particles between two frits obtained by two different procedures. The inlet frit consisted of a short organic polymer made via a thermopolymerization process while the outlet frit was prepared by sintering the octadecylsilica (ODS) material. The packed column was employed in capillary electrochromatography (CEC) experiments for the separation of three selected test compounds. Retention time and separation efficiency were evaluated. Results were compared with those ones obtained with a packed capillary containing the same stationary phase entrapped between two sinterized frits. The novel packed column exhibited comparable separation efficiency and resolution with the traditional one. However, it allowed experiments without pressure support during the runs with no bubble formation.     

Isotopic pattern and accurate mass determination in urine drug screening by liquid chromatography/time-of-flight mass spectrometry

An efficient method was developed for toxicological drug screening in urine by liquid chromatography coupled with electrospray ionization time-of-flight mass spectrometry. The method relies on a large target database of exact monoisotopic masses representing the elemental formulae of reference drugs and their metabolites. Mass spectral identification is based on matching measured accurate mass and isotopic pattern (SigmaFit) of a sample component with those in the database. Data post-processing software was developed for automated reporting of findings in an easily interpretable form. The mean and median of SigmaFit for true-positive findings were 0.0066 and 0.0051, respectively. The mean and median of mass error absolute values for true-positive findings were 2.51 and 2.17 ppm, respectively, corresponding to 0.65 and 0.60 mTh. For routine screening practice, a SigmaFit tolerance of 0.03 and a mass tolerance of 10 ppm were chosen. Ion abundance differences from urine extracts did not affect the accuracy of the automatically acquired SigmaFit or mass values. The results show that isotopic pattern matching by SigmaFit is a powerful means of identification in addition to accurate mass measurement.     

Modification of PP fibres with alkaline copolyamides

Copolyamides with 5.9‐19.7 wt.% of nylon salt ADETA (adipic acid + diethylenetriamine) and 94.1‐80.3 wt.% of ϵ‐caprolactam were synthesized and their properties were estimated. Blended polypropylene/copolyamides fibres containing 5‐15 wt.% of copolyamides were prepared and their properties were evaluated. The electrical properties, hydrophilicity and especially dyeability of modified PP fibres are positively influenced by a higher amount of the copolyamide in the PP and also by a higher amount of the nylon salt ADETA in the copolyamide.     

trans‐Bis(hexafluoroantimonato)(phthalocyaninato)copper(II)

The title compound, trans‐bis­(hexa­fluoro­antimonato‐F)(phthalocyaninato‐κ⁴N^29,30,31,32)copper(II), [Cu(SbF₆)₂(C₃₂­H₁₆N₈)] or Cu(pc)(SbF₆)₂ (pc is phthalocyaninate), comprises a six‐coordinate Cu atom, lying on an inversion center, bonded to four N atoms of a phthalocyanine ring and to F atoms of two trans SbF₆^? groups. The compound is presumed to consist of a Cu^II center and a doubly oxidized phthalocyanine ring, by analogy with Cu(pc)(ReO₄)₂.     

The synthesis of new potential photosensitizers. 1. Mono-carboxylic acid derivatives of tetraphenylporphyrin

Abstract  

A series of mono-alkylcarboxylic acid derivatives of tetraphenylporphyrin have been prepared. All the porphyrins were completely characterized by use of mass, ¹H NMR, UV–visible, and fluorescence spectroscopy. Experimental log P were determined by use of reversed-phase thin-layer chromatography with use of log P _Rekker. These porphyrins are potential photosensitizers in photodynamic therapy.     

Electronic structure of carbon trioxide and vibronic interactions involving Jahn-Teller states

The electronic structure of CO3 is characterized by equation-of-motion and coupled-cluster methods. C(2v) and D(3h) isomers are considered. Vertical excitation energies, transition dipoles, and the molecular orbital character of the excited states are presented for singlet and triplet manifolds. Ground-state equilibrium structures and frequencies are strongly affected by vibronic interactions with low-lying excited states. At D(3h) geometries, the vibronic interactions are enhanced by the Jahn-Teller character of the excited states. The curvature of the potential energy surface and the existence of the D(3h) minimum are very sensitive to the correlation treatment and the basis set. The correlation effects are stronger at D(3h), in agreement with a smaller HOMO-LUMO gap.     

Generation and stereoselective transformations of 3-phenylcyclopropene

A convenient and inexpensive approach to the generation of 3-phenylcyclopropenes is described. Reaction of these compounds with a range of dienophiles and dipolarophiles led to the stereoselective formation of [4+2]- and [3+2]-cycloadducts, which were exclusively exo-3-phenyl-cis-1,2-disubstituted cyclopropanes. Efficient trapping of 1-lithio-3-phenylcyclopropene with different electrophiles is also discussed. Ab initio calculations suggest that the lowest energy conformation of 3-phenylcyclopropene has the plane of the benzene ring perpendicular to the cyclopropene π-bond but with a low rotation barrier.     

Microscale separation methods for enzyme kinetics assays

Miniaturization continues to be one of the leading trends in analytical chemistry and one that brings advantages that can be particularly beneficial in biochemical research. Use of a miniaturized scale enables efficient analysis in a short time and requires very small amounts of samples, solvents, and reagents. This can result in a remarkable decrease in costs of enzyme kinetics studies, especially when expensive or rare enzymes and/or substrates are involved. Free zone electrophoresis is without a doubt the most common microscale separation technique for capillary and on-chip enzyme assays. Progress and applications in this field are reviewed frequently whereas other modes of separation, although successfully applied, receive only marginal interest in such publications. This review summarizes applications of less common modes of separation in capillary or chip formats, namely micellar electrokinetic chromatography, liquid chromatography, gel electrophoresis, isoelectric focusing, and isotachophoresis. Because these techniques are based on separation mechanisms different from those of free zone electrophoresis, they can be, and have been, successfully used in cases where zone electrophoresis fails. Advantages and drawbacks of these alternative separation techniques are discussed, as also are the difficulties encountered most often and solutions proposed by different research groups.     

The preparation,crystal structure and electrochemistry of (5Z,5′Z)-2,2′-(alkane-α,ω-diylsulfanyldiyl)bis(5-(3-pyridylmethylene)-3,5-dihydro-4H-imidazol-4-ones) and their complexes with cobalt(II) chloride

A series of S-alkylated derivatives of 2-thiohydantoins, containing two 5-(3-pyridylmethylene)-3,5-dihydro-4H-imiazole-4-one fragments joined by polymethylene bridges with different numbers of carbon atoms, was synthesized. The title (5Z,5′Z)-2,2′-(alkane-α,ω-diylsulfanyldiyl)bis(5-(3-pyridylmethylene)-3,5-dihydro-4H-imidazol-4-ones) (L) were obtained by alkylation of 5-(3-pyridylmethylene)-3-phenyl-2-thiohydantoine by 1,2-dibromoethane, 1,6-dibromohexane or 1,10-dibromodecane in DMF in the presence of potassium carbonate. The complexes of ligands L with CoCl₂ · 6H₂O have been synthesized. It is shown that, regardless of the L:CoCl₂ ratio, complexes with LCoCl₂ composition are obtained in all cases. The structure of the cobalt(II) chloride complex with (5Z,5′Z)-2,2′-(ethane-1,2-diyldisulfanyldiyl)bis(5-(3-pyridylmethylene)-3-phenyl-3,5-dihydro-4H-imidazol-4-one) was determined by means of the RSA method. The cobalt atom in this complex has a tetrahedral ligand environment and it is coordinated by two chloride anions and two nitrogen atoms of pyridine fragments, forming a 19-membered metallocycle. Electrochemical investigations of the synthesized ligands and complexes have been made by CVA and RDE methods. It is established that the first stage of reduction for the complexes takes place on the metal, whereas the first stage of oxidation takes place on the coordinated chloride-anions.