Silicon solar cells with Al2O3 antireflection coating

The paper presents the possibility of using Al₂O₃ antireflection coatings deposited by atomic layer deposition ALD. The ALD method is based on alternate pulsing of the precursor gases and vapors onto the substrate surface and then chemisorption or surface reaction of the precursors. The reactor is purged with an inert gas between the precursor pulses. The Al₂O₃ thin film in structure of the finished solar cells can play the role of both antireflection and passivation layer which will simplify the process. For this research 50×50 mm monocrystalline silicon solar cells with one bus bar have been used. The metallic contacts were prepared by screen printing method and Al₂O₃ antireflection coating by ALD method. Results and their analysis allow to conclude that the Al₂O₃ antireflection coating deposited by ALD has a significant impact on the optoelectronic properties of the silicon solar cell. For about 80 nm of Al₂O₃ the best results were obtained in the wavelength range of 400 to 800 nm reducing the reflection to less than 1%. The difference in the solar cells efficiency between with and without antireflection coating was 5.28%. The LBIC scan measurements may indicate a positive influence of the thin film Al₂O₃ on the bulk passivation of the silicon.     

Exhausting domains of the symmetrized bidisc

We show that the symmetrized bidisc may be exhausted by strongly linearly convex domains. It shows in particular the existence of a strongly linearly convex domain that cannot be exhausted by domains biholomorphic to convex ones.     

Alkaline hydrogen peroxide pretreatment of energy crops for biogas production

In this study, the influence of alkaline hydrogen peroxide (H₂O₂) pretreatment of the three different plant sources: Miscanthus giganteus, Sorghum Moench, and Sida hermaphrodita, for biogas production was investigated. The influence of temperature, reaction time, and H₂O₂ concentration on the efficiency of biomass degradation and on the further methanogenic fermentation were studied. The results obtained after chemical pretreatment indicate that using H₂O₂ at alkaline conditions leads to the decomposition of three major structures: lignin, hemicellulose, and cellulose. The best results were achieved for the process performed at 25°C for 24 h with the use of a 5 mass % H₂O₂ solution. Although the degradation level was very high for all three plant sources, the biogas production from the energy crops pretreated chemically was strongly inhibited by byproducts and the residual oxygen formed after H₂O₂ decomposition. This fact indicates that alkaline H₂O₂ pretreatment is a very promising method for plant material degradation for further biogas production, but pretreated biomass must be separated from supernatant before the fermentation process because of the high concentration of inhibitors in the hydrolysates. The best results were obtained for Sida with biogas and methane production of 2.29 Ndm³ and 1.06 Ndm³, respectively.     

High water‐content thermoresponsive hydrogels via electrostatic macrocrosslinking of cellulose nanofibrils

Atom transfer radical polymerization (ATRP) has been utilized to synthesize tri‐ and star‐block copolymers of poly(di(ethylene glycol)methyl ether methacrylate) (PDEGMA) and quaternized poly(2‐(dimethylamino)ethyl methacrylate) (qPDMAEMA). The block copolymers, all with a minimum of two cationically charged blocks, were sequentially used for electrostatic macrocrosslinking of a dilute dispersion of anionic TEMPO‐oxidized cellulose nanofibrils (CNF, 0.3 wt%), forming free‐standing hydrogels. The cationic block copolymers adsorbed irreversibly to the CNF, enabling the formation of ionically crosslinked hydrogels, with a storage modulus of up to 2.9 kPa. The ability of the block copolymers to adsorb to CNF was confirmed by quartz crystal microbalance with dissipation monitoring (QCM‐D) and infrared spectroscopy (FT‐IR), and the thermoresponsive properties of the hydrogels were investigated by rheological stress and frequency sweep, and gravimetric measurements. This method was shown to be promising for the facile production of thermoresponsive hydrogels based on CNF. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3415–3424     

Azulene‐Based Macrocyclic Receptors for Recognition and Sensing of Phosphate Anions

Herein we report the synthesis and detailed studies of the anion‐binding properties of two 20‐membered macrocyclic tetramide receptors: one symmetrical, containing two identical azulene‐based bisamide units, the other a hybrid, containing a dipicolinic bisamide unit and an azulene‐based bisamide unit. Analysis of the crystal structures of the macrocyclic receptors revealed their preference for adopting similar well‐preorganized bent‐sheet conformations, both as free receptors and in their complexes with anions. Studies of the optical properties of both receptors revealed abilities to selectively sense phosphate anions (H₂PO₄^?, HP₂O₇^3?), allowing for naked‐eye detection of the presence of these guests in DMSO. Binding studies in solution confirmed that the receptors bind strongly to a series of anions even in highly demanding media, such as mixtures of DMSO with water or with methanol. Comparison of the anion affinity of linear analogues with that of the macrocyclic receptors evidenced the importance of macrocyclic topology. Quantitative analysis revealed that the macrocyclic receptors are selective for H₂PO₄^? over other anions. The affinity to H₂PO₄^? seen for the symmetrical receptor, containing two azulene‐based subunits, is much higher than for the hybrid macrocycle containing both the azulene‐based and pyridine‐derived subunits. This highlights that the azulene‐based building block serves efficiently as both a binding site and a structure‐preorganizing motif.