Quantum interference between the third and fourth exciton states in semiconducting carbon nanotubes using resonance Raman spectroscopy

We exploit an energy level crossover effect [Haroz et al., Phys. Rev. B 77, 125405 (2008)] to probe quantum interference in the resonance Raman response from carbon nanotube samples highly enriched in the single semiconducting chiralities of (8,6), (9,4), and (10,5). UV Raman excitation profiles of G-band spectra reveal unambiguous signatures of interference between the third and fourth excitonic states (E(33) and E(44)). Both constructive and destructive responses are observed and lead to anomalous intensity ratios in the LO and TO modes. Especially large anomalies for the (10,5) structure result from nearly identical energies found for the two E(ii) transitions. The interference patterns demonstrate that the sign of the exciton-phonon coupling matrix elements changes for the LO mode between the two electronic states, and remains the same for the TO mode. Significant non-Condon contributions to the Raman response are also found.     

Ultrasonic technology for enhanced oil recovery from failing oil wells and the equipment for its implemention

A new method for the ultrasonic enhancement of oil recovery from failing wells is described. The technology involves lowering a source of power ultrasound to the bottom of the well either for a short treatment before removal or as a permanent placement for intermittent use. In wells where the permeability is above 20 mD and the porosity is greater than 15% ultrasonic treatment can increase oil production by up to 50% and in some cases even more. For wells of lower permeability and porosity ultrasonic treatment alone is less successful but high production rates can be achieved when ultrasound is applied in conjunction with chemicals. An average productivity increase of nearly 3 fold can be achieved for this type of production well using the combined ultrasound with chemical treatment technology.     

Formation Mechanism of Laser‐Synthesized Iron–Manganese Alloy Nanoparticles,Manganese Oxide Nanosheets and Nanofibers

Laser ablation in liquids (LAL) has emerged as a versatile approach for the synthesis of alloy particles and oxide nanomaterials. However, complex chemical reactions often take place during synthesis due to inevitable atomization and ionization of the target materials and decomposition/hydrolysis of solvent/solution molecules, making it difficult to understand the particle formation mechanisms. In this paper, a possible route for the formation of FeMn alloy nanoparticles as well as MnO_x nanoparticles, ‐sheets, and ‐fibers by LAL is presented. The observed structural, compositional, and morphological variations are clarified by transmission electron microscopy (TEM). The studies suggest that a reaction between Mn atoms and Fe ions followed by surface oxidation result in nonstoichiometric synthesis of Fe‐rich FeMn@FeMn₂O₄ core–shell alloy particles. Interestingly, a phase transformation from Mn₃O₄ to Mn₂O₃ and finally to Ramsdellite γ‐MnO₂ is accompanied by a morphology change from nanosheets to nanofibers in gradually increasing oxidizing environments. High‐resolution TEM images reveal that the particle‐attachment mechanism dominates the growth of different manganese oxides.     

Preparation and characterization of poly(lactic acid)/poly(methyl methacrylate) blend tablets for application in quantitative analysis by micro Raman spectroscopy

Poly(lactic acid) (PLA) is a biodegradable polymer that has a variety of applications, one of which is as biomaterial in surgery or as functional layers on implants, due to its compatibility with living tissue. This paper reports the possibilities of quantification of poly(lactic acid) (PLA) in a polymer matrix such as poly(methyl methacrylate) (PMMA) by micro Raman spectroscopy (MRS). Blends of amorphous poly(DL‐lactic acid) with poly(methyl methacrylate) were prepared by the procedure of dissolution/precipitation. Thermal properties of the blends such as the glass transition temperature (Tg) were characterized by differential scanning calorimetry (DSC). The PLA/PMMA blends exhibited only a single glass transition region, indicating that this system is miscible. The PLA/PMMA system obeys the Gordon–Taylor equation (Tg versus PLA content). Various concentration ratios of PLA blends were prepared to use as a basis for quantitative analysis by MRS. Intensities of the characteristic bands at 813 cm⁻¹ (νCOC of PMMA) and 873 cm⁻¹ (νC―COO of PLA) were used for the calculation. The calibration graph showed a good linear correlation with an R² value of 0.9985. On the basis of the calibration curve obtained, the determined content of several PLA/PMMA blends was in good agreement when compared with nominal contents. The limit of detection (LOD) and quantification (LOQ) were calculated by the calibration data set as signal‐to‐noise method. The relative standard deviation of this method was lower than 10% and the accuracy better than 4%. This study demonstrated that Raman spectroscopy provides an alternative non destructive method for quantitative analysis of PLA in a PMMA matrix. Copyright © 2015 John Wiley & Sons, Ltd.     

SERS signal response and SERS/SERDS spectra of fluoranthene in water on naturally grown Ag nanoparticle ensembles

We present experimental results of the time‐dependent Raman signal response of fluoranthene adsorbed on a naturally grown Ag nanoparticle ensemble, which serves as surface enhanced Raman scattering (SERS) substrate. In addition, SERS characteristics such as the concentration‐dependent calibration curves and the limit of detection (LOD) for fluoranthene in distilled water will be shown. The SERS substrate was prepared by Volmer–Weber growth under ultrahigh vacuum condition and exhibits a plasmon resonance wavelength at 491 nm. For the measurement of SERS signal response and SERS/shifted excitation Raman difference spectroscopy spectra of fluoranthene in water, experimental Raman setup containing a microsystem light source with two emission wavelengths (487.61 nm and 487.91 nm) was used. We experimentally demonstrate that the maximum SERS intensity is achieved 9 min after changing the analyte concentration from 0 nmol/l to 600 nmol/l. This response time is explained by a time‐dependent adsorption of the probe molecules onto the nanoparticles. The LOD for fluoranthene in water was evaluated applying shifted excitation Raman difference spectroscopy (SERDS) at different molecule concentrations. For SERDS, two emission wavelengths of a prototype microsystem light source have been used for Raman excitation. The experimental results reveal that the LOD for the probe molecules is very low. Experimentally, we have detected a fluoranthene concentration of only 4 nmol/l, which is very close to our estimated LOD of 2 nmol/l. Thus, the presented Raman setup, with a SERS substrate, whose plasmon resonance coincides with the excitation wavelength for SERS measurements, is well suited for in‐situ trace detection of pollutant chemicals in water. Copyright © 2013 John Wiley & Sons, Ltd.     

High‐power HgGa2S4 optical parametric oscillator pumped at 1064 nm and operating at 100 Hz

The defect chalcopyrite crystal HgGa₂S₄ has been employed in a 1064‐nm pumped optical parametric oscillator operating at 100 Hz, to generate ∼5 ns long idler pulses near 4 µm with energies as high as 6.1 mJ and average power of 610 mW. At crystal dimensions comparable to those available for the commercial AgGaS₂ crystal, operation of the 1064‐nm pumped HgGa₂S₄ OPO is characterized by much lower pump threshold and higher conversion efficiency, with the most important consequence that such a device might become practical at pump levels sufficiently lower than the optical damage threshold.     

Kinetic limits of the HPP cellular automaton

We study the Boltzmann-Grad limit in various versions of the two-dimensional HPP cellular automaton. In the completely deterministic case we prove convergence to an evolution that is not of kinetic type, a well-known phenomenon after Uchyiama's paper on the Broadwell gas, whereas the limiting equation becomes of kinetic type in the model with random collisions. The main part of the paper concerns the case where the collisions are deterministic and the randomness comes from inserting, between any two successive HPP updatings, ^- stirring updatings, <1 being any fixed positive number and a parameter which tends to 0. The initial measure is a product measure with average occupation numbers of the order of (low-density limit) and varying on distances of the order of ^–1. The limit as 0 of the system evolved for times of the order of ^-1- corresponds to the Boltzmann-Grad limit. We prove propagation of chaos and that the renormalized average occupation numbers (i.e., divided by) converge to the solution of the Broadwell equation. Convergence is proven at all times for which the solution of the Broadwell equation is bounded.     

Self-organisation of di(perfluorohexyl)hexane in Langmuir and LB films

Symmetrical triblock semifluorinated n-alkane, di(perfluorohexyl)hexane of the formula F(CF₂)₆(CH₂)₆(CF₂)₆F (abbreviated F₆H₆F₆), has been synthesised and investigated at the air/water interface. Our results show for the first time that this unusual film-forming material, completely hydrophobic in nature and possessing no polar group, is capable of stable film formation at the free water surface. The surface pressure–area isotherm of the studied compound exhibited two regions: corresponding to monotonous pressure rise, followed by a pseudo-plateau region. Visualisation of film structure with Brewster angle microscope (BAM) proved the formation of domains within the pseudo-plateau region. A closer insight into the structure of these domains with atomic force microscope (AFM) proved their ordered, circular shape. The average area of F₆H₆F₆ domain was found to depend on surface pressure value, as it is 4.98 ± 1.75 μm² at π = 1.2 mN/m to 16.54 ± 0.31 μm² at π = 1.7 mN/m. Following performed quantum-chemical calculations, it can be concluded that the observed surface aggregates from F₆H₆F₆ are formed by linear conformers with shifted CF and CH parts. The calculated domain thickness is between 20 and 21 Å, which perfectly agrees with the experimental value estimated from AFM measurements (20.3 ± 1.4 Å).     

Growth and comparison of physicochemical properties of pure,Ca and Sr doped NH4Sb3F10 single crystals for electro optic applications

Single crystals of pure, Ca²⁺ and Sr²⁺ doped NH₄Sb₃F₁₀ are grown by slow evaporation technique. The effect of dopants on the growth and physicochemical properties also have been investigated and reported for the first time. The grown crystals are characterized with the aid of single crystal X-ray diffractometry to confirm the crystal structure. EDAX studies are done to confirm the presence of dopants in the crystal lattice. The vibrational frequencies of various group ligands in the crystals have been derived from the Fourier transform infrared (FT-IR) spectrum. From the optical absorption spectrum the band gap energy was calculated and it was found to be 5.76, 6.29 and 6.35 eV for pure, Ca²⁺ and Sr²⁺ doped NH₄Sb₃F₁₀ crystals respectively. Thermal stability of the sample has been analysed using TG-DTA analysis. The activation energy of pure, Ca²⁺ and Sr²⁺ doped NH₄Sb₃F₁₀ crystals were calculated from the dc conductivity measurements and it is found to be 0.2728, 0.2816 and 0.3622 eV Experimental results shows improved physicochemical properties when the dopant is added to the pure material.     

电环形谐振腔表面几何参数对太赫兹超材料吸收体性能的影响

本文分析了电环形谐振腔的几何参数对超材料吸收体吸收率的影响。文中详细分析了电环形谐振腔参数、介电层（间隔物）厚度和电环形谐振腔厚度对超材料吸收体的影响,在此基础上,设置正交实验分析了几种参数的综合影响,最终获得超材料的理论吸收率。根据上述结果,制备了2个超材料吸收体的原理样机,经实验测得,原理样机的窄带吸收率高于98%。本文的研究成果为高性能吸收器的设计提供了指导。