Light and heavy dansyl reporter groups in food chemistry: amino acid assay in beverages

5-Dimethylamino-1-sulfonyl naphthalene (DNS, commonly referred as dansyl) is a functionality, bearing well-established properties in directing the fragmentation, by mass spectrometry (MS), of the corresponding ionized sulfonylated derivatives. This property is shared also by its labeled analogs. The use of d(0)/d(6) DNS derivatives is now exploited in the application of the well-established isotope dilution mass spectrometric approach in the assay of complex mixtures. A new method for the quantitation of amino acids (AAs) in beverages is therefore presented, which relies on liquid chromatographic separation of their N-dansylated derivatives followed by comparative electrospray tandem MS/MS of the d(0)/d(6) isobaric mixtures. Labeled and unlabeled DNS derivatives of the selected AAs are readily available by microwave-assisted synthetic protocols. The novelty of the method is represented by the use of heavy and light DNS-isotopologue providing suitable reporter groups. Multiple-reaction monitoring has been applied in the assay of AAs in wine, pineapple juice and bergamot juice with good-to-excellent results as proved by both relative standard deviation, lower than 15%, and by the accuracy values in the range 90-110%.     

First-order interaction energies and the basis set truncation effects

The basis set superposition error is investigated in terms of the first-order symmetry adapted perturbation theory (SAPT). The analysis of the first-order SAPT contribution to the interaction energy reveals the origin of the basis set truncation effects at both the one-electron and many-electron levels of approximation. This helps to formulate the necessary conditions which ensure that the calculated interaction energy is free of the basis set superposition contributions. At the level of the one-electron approximation used for both the interacting system and its subsystems a part of the basis set truncation errors can be eliminated by using what is called the dimer-centred basis set. In order to remove all contributions which arise from the symmetrization of the product of wave functions of the subsystems one needs to redefine their reference states. This means that for the interacting system represented by a single HF determinant, the subsystems must be considered at the level of full CI in the orbital space spanned by all occupied orbitals used to describe the dimer. Then, the interaction energy becomes completely free of the basis set superposition contributions. These general considerations are exemplified by calculations of the first-order SAPT interaction energy in helium and H₂ dimers at different levels of approximation for monomers. Also the convergence of the calculated energies to the complete basis set limit is investigated.     

Versuche mit markierten Atomen über den Mechanismus der Vermehrung von Tabakmosaikvirus in Nicotiana tabacum

Zusammenfassung Tabakmosaikvirus hoher spezifischer Aktivität, das am Phosphor und/oder Kohlenstoff markiert war, wurde biosynthetisch hergestellt. Damit wurde jeweils ein Blatt einer Pflanze von Nicotiana tabacum infiziert und der etwaige Transport von intaktem Virus durch das Leitungssystem der Pflanzen dadurch weitgehend unterbunden, daß die Leitgefäße des behandelten Blattes durchtrennt wurden.Das aus den unbehandelten Blättern der Pflanze nach 17 1/2, 48 und 72 Stdn. isolierte Virus wies im Vergleich zum eingesetzten TMV einen viel geringeren Anteil an Gesamtradiokohlenstoff im Protein auf. Dies deutet darauf hin, daß das Virus der unbehandelten Blätter höchstens zu einem sehr geringen Teil aus intakt transportiertem TMV bestehen könnte.Die nicht im TMV enthaltenen Polynukleotide der unbehandelten Blätter enthalten 7 Stdn. nach der Infektion verhältnismäßig viel³²P, doch tritt derselbe innerhalb 70 Stdn. zum allergrößten Teil in niedermolekulare Verbindungen über.Die in Puffer unlöslichen Polynukleotide der unbehandelten Blätter (Blattnukleinsäure) weisen ein mit der Zeit abnehmendes Verhältnis von³²P/¹⁴C auf. Auch innerhalb der Nukleinsäure (NS) des TMV dieser Blätter nimmt dieses Verhältnis zunächst ab, steigt aber später wieder an.Die angeführten Ergebnisse stehen mit der Vorstellung im Einklang, daß das Virus NS abspaltet und sowohl die systemische Infektion der Pflanze wie auch die Virusvermehrung mindestens zum Teil durch diese freie NS bewirkt wird. Die aus dem Virus stammende freie NS unterliegt zum großen Teil lebhaftem Abbau, wobei ihre Komponenten wahrscheinlich dem Aufbau normaler Blattbestandteile dienen.Mit 3 Abbildungen     

A priori bounds in weighted spaces

In unbounded domains we state some a priori bounds for solutions of the Dirichlet problem for linear second order elliptic differential equations in nondivergence form with discontinuous coefficients in weighted spaces. The weight function is related to the distance function from a fixed subset S of ∂Ω.     

Collision Avoidance in Bi-Directional AGV Systems

The use of a bi-directional, as opposed to a one-way, transportation system, can increase the operational efficiency of automated guided vehicles in both manufacturing and warehousing environments. However, the full potential will only be realized if the routeing algorithms pay particular attention to the problem of collision avoidance. This paper is concerned with the development of such an algorithm. The method is based on the use of delays and deviations to avoid collisions that could arise when using the shortest routes for each vehicle, and is applicable to any transportation system which can be represented as a network with known travel times.     

Ultrasonic technology for enhanced oil recovery from failing oil wells and the equipment for its implemention

A new method for the ultrasonic enhancement of oil recovery from failing wells is described. The technology involves lowering a source of power ultrasound to the bottom of the well either for a short treatment before removal or as a permanent placement for intermittent use. In wells where the permeability is above 20 mD and the porosity is greater than 15% ultrasonic treatment can increase oil production by up to 50% and in some cases even more. For wells of lower permeability and porosity ultrasonic treatment alone is less successful but high production rates can be achieved when ultrasound is applied in conjunction with chemicals. An average productivity increase of nearly 3 fold can be achieved for this type of production well using the combined ultrasound with chemical treatment technology.     

Self-organisation of di(perfluorohexyl)hexane in Langmuir and LB films

Symmetrical triblock semifluorinated n-alkane, di(perfluorohexyl)hexane of the formula F(CF₂)₆(CH₂)₆(CF₂)₆F (abbreviated F₆H₆F₆), has been synthesised and investigated at the air/water interface. Our results show for the first time that this unusual film-forming material, completely hydrophobic in nature and possessing no polar group, is capable of stable film formation at the free water surface. The surface pressure–area isotherm of the studied compound exhibited two regions: corresponding to monotonous pressure rise, followed by a pseudo-plateau region. Visualisation of film structure with Brewster angle microscope (BAM) proved the formation of domains within the pseudo-plateau region. A closer insight into the structure of these domains with atomic force microscope (AFM) proved their ordered, circular shape. The average area of F₆H₆F₆ domain was found to depend on surface pressure value, as it is 4.98 ± 1.75 μm² at π = 1.2 mN/m to 16.54 ± 0.31 μm² at π = 1.7 mN/m. Following performed quantum-chemical calculations, it can be concluded that the observed surface aggregates from F₆H₆F₆ are formed by linear conformers with shifted CF and CH parts. The calculated domain thickness is between 20 and 21 Å, which perfectly agrees with the experimental value estimated from AFM measurements (20.3 ± 1.4 Å).     

Growth and comparison of physicochemical properties of pure,Ca and Sr doped NH4Sb3F10 single crystals for electro optic applications

Single crystals of pure, Ca²⁺ and Sr²⁺ doped NH₄Sb₃F₁₀ are grown by slow evaporation technique. The effect of dopants on the growth and physicochemical properties also have been investigated and reported for the first time. The grown crystals are characterized with the aid of single crystal X-ray diffractometry to confirm the crystal structure. EDAX studies are done to confirm the presence of dopants in the crystal lattice. The vibrational frequencies of various group ligands in the crystals have been derived from the Fourier transform infrared (FT-IR) spectrum. From the optical absorption spectrum the band gap energy was calculated and it was found to be 5.76, 6.29 and 6.35 eV for pure, Ca²⁺ and Sr²⁺ doped NH₄Sb₃F₁₀ crystals respectively. Thermal stability of the sample has been analysed using TG-DTA analysis. The activation energy of pure, Ca²⁺ and Sr²⁺ doped NH₄Sb₃F₁₀ crystals were calculated from the dc conductivity measurements and it is found to be 0.2728, 0.2816 and 0.3622 eV Experimental results shows improved physicochemical properties when the dopant is added to the pure material.     

Predicting the Mechanical Properties of Binary Blends of Immiscible Polymers

We couple a morphological study of an immiscible binary AB mixture with a micromechanical simulation to determine how the spatial distribution of the A and B domains and the interfacial region (interphase) affects the mechanical behavior of the blend. The morphological studies are conducted through a three-dimensional Cahn-Hilliard (CH) simulation. Through the CH calculations, we obtain the size and structure of the domains for different blend compositions. The output of the CH model serves as the input to the Lattice Spring Model (LSM), which consists of a three-dimensional network of springs. In particular, the location of the different phases is mapped onto the LSM lattice and the appropriate force constants are assigned to the LSM sites. A stress is applied to the LSM lattice and we calculate the elastic response of the material. We find that the local stress and strain fields are highly dependent on the morphology of the system. By integrating the morphological and mechanical models, we can isolate how modifications in the composition of the mixture affect the macroscopic behavior. Thus, we can establish how choices made in the components affect the ultimate performance of the material.