In vivo pH MEASUREMENT AND IMAGING OF TUMOR TISSUE USING A pH-SENSITIVE FLUORESCENT PROBE (5,6–CARBOXYFLUORESCEIN): INSTRUMENTAL AND EXPERIMENTAL STUDIES

Abstract This study evaluated the effectiveness of dual-wavelength ratio fluorescence imaging using a pH-dependent indicator (5,6–carboxyfluorescein, 5,6–CF) for in vivo pH mapping of tissue. A prototype version of a highly sensitive fluorescence imaging device consisting of a modified xenon lamp, an image-intensified camera and a digital imageprocessing system has been developed. 5,6–Carboxyfluorescein was used because its fluorescence emission increases as a function of pH in the physiological (6.0–7.4) pH range. The ratio of fluorescence intensities obtained with the imaging system has been calibrated using aqueous 5,6–CF standards at various pH values. Because the pH of interstitial fluid of malignant tumors tends to be lower than that of normal tissue and can be depressed by glucose administration, experiments were performed on 10 CDF mice bearing lymphoid leukemia P388 grafted subcutaneously. The range of linearity of the calibration curve was obtained between 5.3 and 6.7 with a measured pK, value of 5.93. Consequently the maximum sensitivity was observed in this range. The calculated pH from ratio images was 6.21 ± 0.12 in tumorous tissue. This value was equivalent to those obtained at the same time using microelectrodes (6.2 ± 0.3).
These experiments showed that a dose of 5 mg/kg 5,6–CF and an excitation power density of 2.5 mW/cm² are sufficient to give a fluorescent pH image of tumors. The limitation of 5,6–CF for the in vivo mapping of tissue results from its low pK_a and consequent range of sensitivity. The advantages of this imaging technique compared to microelectrodes are that it (1) is noninvasive, (2) displays a two-dimensional pH image with high resolution (profile distribution of pH in tissue) and (3) can be used to monitor pH over a few hours.     

Chlorotris(2,4,6‐trimethylphenyl)tin(IV) and its ethanol hemisolvate

Chloro­tris(2,4,6‐tri­methyl­phenyl)­tin(IV), crystallizes from ethanol as solvent‐free needles, [Sn(C₉H₁₁)₃Cl], (I), and as the hemisolvate, [Sn(C₉H₁₁)₃Cl]·0.5C₂H₆O, (II). The asymmetric unit in (I) has three independent mol­ecules, whereas in (II), there are two [Sn(C₉H₁₁)₃Cl] mol­ecules together with one ethanol molecule. In the unit cell of (II), the ethanol mol­ecules lie in channels between stacks of (Mes)₃SnCl mol­ecules (Mes is 2,4,6‐tri­methyl­phenyl) and each ethanol mol­ecule is disordered (0.50:0.50) over two positions. A comparison of the structures of the title compounds and other (Mes)₃SnX (X = F, Br or I) systems with those of the tri­phenyl­tin analogues shows that the steric requirements of the o‐CH₃ groups are met by a flattening of the SnC₃ skeleton and increases in the average Sn—X and Sn—C values. Comparing Sn—X data for (Mes)₃SnX (X = F, Cl, Br or I) systems with values for the tris(o‐methoxy­phenyl)­tin analogues suggests that the Sn—F distance of 1.961 Å in (Mes)₃SnF may well be characteristic of sterically unhindered four‐coordinate Ar₃SnF systems.     

Physical characterization of the polymorphic variations of magnesium stearate and magnesium palmitate hydrate species

The anhydrate, dihydrate, and trihydrate phases of chemically pure magnesium stearate and magnesium palmitate have been prepared and characterized as to their structural characteristics. The magnesium palmitate materials were obtained as significantly larger crystals than were the magnesium stearate materials, and the crystals of the dihydrate phase of either material were found to be the most fully developed. The crystal structures of all materials were judged to be very similar to each other, differing primarily in the magnitude of the long (001) crystal spacing. Thermal analysis studies revealed that the water of hydration contained within the dihydrate phases of either magnesium stearate or magnesium palmitate was more tightly bound than was the water of hydration within the corresponding trihydrate phases. These findings provide further support for the structural picture where the water contained in these lattice structures is present between the intermolecular planes.     

Oxalate-bridged complexes of dimolybdenum and ditungsten supported by pivalate ligands: ((t)BuCO(2))(3)M(2)(mu-O(2)CCO(2))M(2)(O(2)C(t)Bu)(3). Correlation of the solid-state, molecular, and electronic structures with Raman, resonance Raman, and electronic spectral data

The compounds ((t)BuCO(2))(3)M(2)(mu-O(2)CCO(2))M(2)(O(2)C(t)Bu)(3) (M(4)OXA), where M = Mo or W, are shown by analysis of powder X-ray diffraction data to have extended lattice structures wherein oxygen atoms from the oxalate and pivalate ligands of one M(4)OXA molecule are linked to metal atoms of neighboring molecules. Raman, resonance Raman, electronic absorption (2-325 K in 2-MeTHF), and emission spectra are reported, together with corresponding spectra of the mu-O(2)(13)C(13)CO(2) isotopomers. To aid in the assignment, the Raman spectra of K(2)C(2)O(4).H(2)O and K(2)(13)C(2)O(4).H(2)O have also been recorded. The visible region of the electronic spectra is dominated by intense, fully allowed MLCT transitions, M(2) delta to oxalate pi*, which show pronounced thermochromism and extensive vibronic progressions associated with the oxalate ligand at low temperatures. With excitation into these charge-transfer bands, strong resonance enhancement is seen for Raman bands assigned to the oxalate nu(1)(a(g)) and, to a lesser extent, nu(2)(a(g)) modes. Electronic structure calculations for the model compounds (HCO(2))(3)M(2)(mu-O(2)CCO(2))M(2)(O(2)CH)(3), employing density functional theory (gradient corrected and time-dependent) with the Gaussian 98 and ADF 2000 packages, predict the planar oxalate D(2h) configuration to be favored, which maximizes M(2) delta to oxalate pi* back-bonding, and indicate low barriers (<8 kcal mol(-1)) to rotation about the oxalate C-C bonds.     

Proteome analysis of conditioned medium from cultured adult hippocampal progenitors

It is known that proliferation and survival of neural stem/progenitor cells in vitro not only depend on exogenous factors, but also on autocrine factors secreted into the conditioned medium. It is also well known that the identification of bioactive proteins secreted into the conditioned medium poses a substantial challenge. Recently, neural stem/progenitor cells were shown to secrete a survival factor, cystatin C, into the conditioned medium. Here, we demonstrate an approach to identify other low molecular weight proteins in conditioned medium from cultured adult rat hippocampal progenitor cells. A combination of preparative two-dimensional gel electrophoresis (2-DE) and mass spectrometry was utilized in the analysis. We were able to identify a number of proteins, which include Rho-guanine nucleotide dissociation inhibitor 1, phosphatidylethanolamine binding protein (PEBP), also termed Raf-1 kinase interacting protein, polyubiquitin, immunophilin FK506 binding protein 12 (FKBP12) and cystatin C. The presence of PEBP and FKBP12 in conditioned medium was confirmed immunologically. All nestin-positive progenitor cells showed immunoreactivity for antibodies against PEBP and FKBP12. To our knowledge we are the first to use this preparative proteomic approach to search for stem cell factors in conditioned medium. The method could be used to identify novel bioactive proteins secreted by stem/progenitor cells in vitro. Identification of bioactive proteins in vitro is of potential importance for the understanding of the regulatory mechanisms of the cells in vivo.     

Infrared Spectroscopic Study of the Solvation of Tetramethylurea in Protic + Aprotic Mixed Solvents

The infrared spectra of tetramethylurea have been measured in mixtures of dimethylsulfoxide or acetonitrile with D₂O or deuterated methanol (CH₃OD). Marked solvatochroism is observed for bands associated with the C=O and C–N stretches of tetramethylurea, with the former moving to lower wavenumber, and the latter to higher, as the concentration of the protic component is increased. The C=O band shows four distinct absorbances, which are attributed to non-, mono, di-, and trihydrogen bonded tetramethylurea. The relative populations of the different hydrogen bonded species were determined from analyses of the C=O band shapes. It is found that the variations in the populations of the different hydrogen bonded species can be accounted for by a simple mass action treatment.     

SPECTROSCOPIC STUDIES OF CUTANEOUS PHOTOSENSITIZING AGENTS–VIII. A SPIN-TRAPPING STUDY OF LIGHT INDUCED FREE RADICALS FROM CHLORPROMAZINE and PROMAZINE

Abstract— The clinically important phenothiazine drugs, particularly chlorpromazine, often elicit phototoxic and photoallergic reactions. We have used the spin traps 2-methyl-2-nitrosopropane (MNP) and 5,5-dimethyl-pyrroline-N-oxide (DMPO) to define the radical photolysis pathways of chlorpromazine and promazine. In the absence of oxygen the dechlorination product of chlorpromazine is trapped by MNP. The reactivity of the dechlorination product is similar to that of the phenyl radical as shown by its ability to extract hydrogen atoms from donors. Our results suggest that the dechlorination product is sufficiently reactive to account for the observation that chlorpromazine is more phototoxic than its parent promazine. In the presence of oxygen both chlorpromazine and promazine form a superoxide-dismutase-insensitive oxygen-centered intermediate which, when trapped by DMPO, rapidly decays to DMPO-OOH and subsequently to DMPO-OH. In addition, chlorpromazine readily undergoes photoelectron ejection only when it is excited into the second excited singlet state (Δ < 280 nra). This previously unknown wavelength dependence of photoionization should be considered in establishing the mechanism of chlorpromazine photosensitization.     

Processing studies and thermal stability of addition polymers from 1,4,5,8-tetrahydro-1,4;5,8-diepoxyanthracene and Bis-dienes

1,4,5,8-Tetrahydro-1,4;5,8-diepoxyanthracene reacts with various anthracene end-capped polymide oligomers to form Diels-Alder cycloaddition copolymers. The polymers are soluble in common organic solvents, and dehydrate thermally at temperatures of 300–350°C to give thermal oxidatively stable pentiptycene units along the polymer backbone. Because of their high softening points and good thermal oxidative stability, the polymers are candidates for matrix resins for high temperature composite applications. To assess their usefulness for such applications, several parameters have been studied affecting the properties of the final polymer. These parameters include varying the formulated molecular weight of the end-capped prepolymers, and use of meta-substituted aromatic diamine in place of some of the para-substituted diamine. Processability of the resins was studied using rheometric spectrometry, and a processing scheme was devised. Finally, several formulations of neat resins were compression molded into coupons, and evaluated for longterm stability in air at 315 and 371°C. The best combination of good processability and thermal oxidative stability was obtained from polymers synthesized with small amounts of meta-diamine substitution and higher formulated molecular weight prepolymers.     

Redox reactions involving rhenium and uranium hexafluorides,a convenient synthesis of β-uranium pentafluoride

Rhenium and uranium hexafluorides oxidise elemental iodine in iodine pentafluoride at ambient temperature to give the I₂⁺ cation. With UF₆ an additional reaction occurs to give β-uranium pentafluoride as one product, β-UF₅ is soluble in acetonitrile without disproportionation and is also formed from the reduction of UF₆ by MeCN. Copper, cadmium, and thallium metals are oxidised by ReF₆ in MeCN giving Cu^I, Cd^II, and Tl^I hexafluororhenates(V) but the reactions are complicated by reaction between ReF₆ and the solvent.