Templated synthesis of the novel layered silver-antimony sulfides [H3NCH2CH2NH2][Ag2SbS3 and [H3NCH2CH2NH2]2[Ag5Sb3S8

Two new silver-antimony sulfides, [C(2)H(9)N(2)][Ag(2)SbS(3)] (1) and [C(2)H(9)N(2)](2)[Ag(5)Sb(3)S(8)] (2), have been prepared solvothermally in the presence of ethylenediamine and characterized by single-crystal X-ray diffraction, thermogravimetry, and elemental analysis. Compound 1 crystallizes in the space group Pn (a = 6.1781(1) A, b =11.9491(3) A, c = 6.9239(2) A, beta =111.164(1) degrees ) and 2 in the space group Pm (a = 6.2215(2) A, b = 15.7707(7) A, c = 11.6478(5) A, beta = 92.645(2) degrees ). The structure of 1 consists of chains of fused five-membered Ag(2)SbS(2) rings linked to form layers, between which the template molecules reside. Compound 2 contains honeycomb-like sheets of fused silver-antimony-sulfide six-membered rings linked to form double layers. The idealized structure can be considered to be an ordered defect derivative of that of lithium bismuthide, Li(3)Bi, and represents a new solid-state structure type.     

Changes in silicon elastomeric surface properties under stretching induced by three surface treatments

Poly(dimethylsiloxane) (PDMS) substrates are used in many applications where the substrates need to be elongated and various treatments are used to regulate their surface properties. In this article, we compare the effect of three of such treatments, namely, UV irradiation, water plasma, and plasma polymerization, both from a molecular and from a macroscopic point of view. We focus our attention in particular on the behavior of the treated surfaces under mechanical stretching. UV irradiation induces the substitution of methyl groups by hydroxyl and acid groups, water plasma leads to a silicate-like layer, and plasma polymerization causes the formation of an organic thin film with a major content of anhydride and acid groups. Stretching induces cracks on the surface both for silicate-like layers and for plasma polymer thin coatings. This is not the case for the UV irradiated PDMS substrates. We then analyzed the chemical composition of these cracks. In the case of water plasma, the cracks reveal native PDMS. In the case of plasma polymerization, the cracks reveal modified PDMS. The contact angles of plasma polymer and UV treated surfaces vary only very slightly under stretching, whereas large variations are observed for water plasma treatments. The small variation in the contact angle values observed on the plasma polymer thin film under stretching even when cracks appear on the surface are explained by the specific chemistry of the PDMS in the cracks. We find that it is very different from native PDMS and that its structure is somewhere between Si(O2) and Si(O3). This is, to our knowledge, the first study where different surface treatments of PDMS are compared for films under stretching.     

Activation and Coordination of Ammonia at [Cp*Ir(H)2]: NMR and Matrix Isolation Studies

¹H NMR exchange spectroscopy of a reaction mixture of [Cp*Ir(H)₄] ( 1 ; Cp*=1,2,3,4,5‐pentamethylcyclopentadienyl) and ammonia suggests an exchange of hydrogen atoms between the hydrido ligands and ammonia. Treatment of 1 with ND₃ led to an H/D exchange between ND₃ and the hydrido ligands of 1 . Subsequent studies showed that photolysis of 1 isolated in frozen argon matrices leads to the formation of the iridium compounds [Cp*Ir(H)₂] ( 2 ) and [Cp*Ir(H)₃] ( 4 ), as it was confirmed by IR spectroscopy. In the presence of water the aqua complex [Cp*Ir(H)₂(OH₂)] ( 3 ) was generated simultaneously. Accordingly, photolysis of 1 in an argon matrix doped with ammonia gave rise to the ammine complex [Cp*Ir(H)₂(NH₃)] ( 5 ). IR assignments were supported by calculations of the gas‐phase IR spectra of 1 – 5 by DFT methods.     

How Carbon Nanotube Crushing can Improve Flame Retardant Behaviour in Polymer Nanocomposites?

Nanocomposites based on an ethylene–vinyl acetate copolymer (27 wt.‐% vinyl acetate) and multiwall carbon nanotubes (MWNTs) have been prepared by melt blending and their thermal degradation and flame retardant properties have been evaluated. Special attention has been paid to the influence of the nanotube nature on the flammability properties and more particularly on the time to ignition (TTI) as measured by cone calorimetry. It has been shown that there is a strong influence of the nature of carbon nanotubes on the fire behaviour of the composites, especially previous MWNTs crushing proved to substantially delay the TTI while maintaining much reduced heat release rate (HRR). Such a remarkable behaviour might be explained by the chemical reactivity of radical species present at the surface/extremities of crushed MWNTs during the combustion process.

     

Exploring the Molecular Structure of Imidazolium–Silica‐Based Nanoparticle Networks by Combining Solid‐State NMR Spectroscopy and First‐Principles Calculations

A DFT‐based molecular model for imidazolium–silica‐based nanoparticle networks (INNs) is presented. The INNs were synthesized and characterized by using small‐angle X‐ray scattering (SAXS), NMR spectroscopy, and theoretical ab initio calculations. ¹¹B and ³¹P HETCOR CP MAS experiments were recorded. Calculated ¹⁹F NMR spectroscopy results, combined with the calculated anion–imidazolium (IM) distances, predicted the IM chain density in the INN, which was also confirmed from thermogravimetric analysis/mass spectrometry results. The presence of water molecules trapped between the nanoparticles is also suggested. First considerations on possible π–π stacking between the IM rings are presented. The predicted electronic properties confirm the photoluminescence emissions in the correct spectral domain.     

Total synthesis of (±)-17-norcamptothecin, a novel E-ring modified camptothecin

The first total synthesis of (±)-17-norcamptothecin, a novel camptothecin analog possessing an α-hydroxy-γ-lactone E-ring, has been accomplished by using a short and flexible route. The stability of this new compound in aqueous medium has been evaluated through fluorescence spectroscopy.     

Synthesis of thermosensitive guar‐based hydrogels with tunable physico‐chemical properties by click chemistry

Thermosensitive guar‐based hydrogels are obtained in water solutions by copper‐catalyzed 1,3‐dipolar cycloaddition between alkyne‐functionalized guars and α,ω‐diazido‐poly[(ethylene glycol)‐co‐(propylene glycol)]. Characterization by TGA, HR‐MAS ¹H NMR, and rheology have shown that hydrogels with tunable physico‐chemical properties, such as crosslinking density, viscoelasticity, swelling ratio, and so forth, could be obtained by varying the guar molar mass, the degree of alkyne functionality, the guar/crosslinker weight ratio, and the reaction temperature. Based on swelling measurements, it has been shown that the thermal sensitiveness of guar‐based hydrogels is fast, reversible, and intimately related to the weight fraction of the thermosensitive crosslinker in the network. Finally, the monitoring of doxorubicin hydrochloride release has demonstrated the potential of these hydrogels as temperature‐dependent drug release devices. The robust, efficient, and orthogonal approach described herein represents a general approach towards the development of well‐controlled guar‐based hydrogels using α,ω‐diazido crosslinkers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2733–2742, 2010     

Characterization of dielectric barrier electrospray ionization for mass spectrometric detection

A novel electrospray interface is presented which induces an electric field by dielectric polarization through a non-conductive barrier. Therefore, a square-wave high-voltage signal is applied. This technique allows mass spectrometric measurements in the positive as well as in the negative mass spectrometry mode without changing the polarity of the potential applied, and it decreases the risk of undesired discharges, induced by high electric currents. The applicability of this technique is demonstrated by mass spectrometric determination of reserpine.     

Circularly Polarized Luminescence and Circular Dichroism of Bichromophoric Difluoroboron-β-diketonates: Inversion and Enhanced Chirality Based on Spatial Arrangements and Self-Assembly

We synthesized two bichromophoric difluoroboron-β-diketonates (DFB) connected in para and meta positions by using cyclohexane diamine as a chiral bridge ( para and meta (R/S)-CyDFB ). TD-DFT calculations revealed that the variation in connectivity of the DFB units leads to different spatial arrangements and a chirality inversion of the bichromophoric DFB. Higher g_abs values were obtained in (R/S)-CyDFB connected in para as compared to meta position. Aggregation of para (R/S)-CyDFB in mixture of solvents increase the g_lum values as compared to its monomeric form. Ultrasonication and heating induced the formation of highly ordered nano-helical wires of para (R/S)-CyDFB that increased the g_lum values to 0.015. On the other hand, meta (R/S)-CyDFB failed to form highly ordered self-assembled wires due to hindered H-binding sites. These observations indicate that the chiroptical properties of DFB bi-chromophore system can be modulated with self-assembly and spatial arrangement of the chromophores.     

Development of a Chitosan/Nickel Phthalocyanine Composite Based Conductometric Micro-sensor for Methanol Detection

Thin-film composite of chitosan/nickel phthalocyanine (NiPc) was electrochemically deposited on the fingers of interdigitated gold electrodes, applying chronoamperometric polymerization technique. The presence of crystallized NiPc in the chitosan was confirmed by EDX and FTIR analysis. Acetone, ethanol, and methanol gas-sensing properties of the films prepared at optimum conditions were studied at atmospheric temperature, through differential measurements at an optimized frequency of 10 kHz, using a lock-in amplifier. The conductometric sensor presents the highest sensitivity of 60.2 μS.cm⁻¹(v/v) for methanol and 700 ppm as the limit of detection. For validation, the methanol content of a commercial rubbing alcohol was determined.