Evaluations of solid electrodes for use in voltammetric monitoring of heavy metals in samples from metallurgical nickel industry

Evaluation of different solid electrode systems for detection of zinc, lead, cobalt, and nickel in process water from metallurgical nickel industry with use of differential pulse stripping voltammetry has been performed. Zinc was detected by differential pulse anodic stripping voltammetry (DPASV) on a dental amalgam electrode as intermetallic Ni–Zn compound after dilution in ammonium buffer solution. The intermetallic compound was observed at –375 mV, and a linear response was found in the range 0.2–1.2 mg L^–1 (r²=0.98) for 60 s deposition time. Simultaneous detection of nickel and cobalt in the low g L^–1 range was successfully performed by use of adsorptive cathodic stripping voltammetry (AdCSV) of dimethylglyoxime complexes on a silver–bismuth alloy electrode, and a good correlation was found with corresponding AAS results (r²=0.999 for nickel and 0.965 for cobalt). Analyses of lead in the g L^–1 range in nickel-plating solution were performed with good sensitivity and stability by DPASV, using a working electrode of silver together with a glassy carbon counter electrode in samples diluted 1:3 with distilled water and acidified with H₂SO₄ to pH 2. A new commercial automatic at-line system was tested, and the results were found to be in agreement with an older mercury drop system. The stability of the solid electrode systems was found to be from one to several days without any maintenance needed.     

Topographical properties of polymer films deposited in capillaries for electrophoretic separations of large organic molecules

Topography and thickness of hydrophilic polymer coatings of fused-silica capillaries for capillary electrophoresis (CE) were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and profilometry. Three hydrogels, poly(2-hydroxyethyl methacrylate) [poly(HEMA)], poly(diethylene glycol monomethacrylate) [poly(DEGMA)], and poly(triethylene glycol monomethacrylate) [poly(TEGMA)], were deposited using two procedures, either by simple physical sorption of the polymers, or by derivatization of the capillary wall surface with glycidyl methacrylate (EPMA) followed by polymerization of the appropriate monomers. The performance of the modified capillaries was tested under CE conditions (decrease in the electroosmotic flow, EOF dependence on pH, separation of milk and standard proteins). It has been found that the most important property of the polymer coating is its thickness, whereas its topography and the degree of its hydrophobicity are less significant. Film deposition by physical adsorption is preferable to polymerization on the derivatized surface.     

Mass spectrometric study to characterize thioisoindole derivatives of aminoglycoside antibiotics

Aminoglycoside antibiotics are widely used to treat serious Gram-negative and Gram-positive bacterial infections. The lack of a UV chromophore presents a problem in the analysis of aminoglycosides. Derivatization with 1,2-phthalic dicarboxaldehyde (OPA) in the presence of a thiol made it possible to introduce a UV chromophoric thioisoindole moiety. A qualitative mass spectrometry study was carried out to confirm the molecular identity of the products formed. The conditions described earlier to derivatize gentamicin and kanamycin yielded products in which all primary amino groups are fully derivatized. On the other hand, with tobramycin and amikacin, there was also formation of incompletely derivatized products that contained one thioisoindole group less than the fully derivatized product. This study has therefore brought an additional insight into the nature of the OPA-aminoglycoside derivatives studied.     

Synthesis, X-ray diffraction analysis and NMR studies of (Z)-2-methyl-3-triphenylstannyl-3-pentene-2-ol

The synthesis of (Z)-2-methyl-3-triphenylstannyl-3-pentene-2-ol and its characterization by an X-ray diffraction study and multinuclear NMR are reported. The tin atom exhibits a distorted tetrahedral SnC₄ geometry with the four Sn---C bond distances experimentally equivalent. The slight distortion from the ideal tetrahedral geometry is because of the presence of a weak intramolecular HO → Sn interaction of 3.012(3) Å which produces a loose four-membered ring. The title compound was characterized in solution by ¹H, ¹³C and ¹¹⁹Sn NMR, and the persistence of the weak intramolecular HO → Sn coordination in solution was revealed by ¹³C and ¹¹⁹Sn secondary isotope multiplet of partially labelled entities (SIMPLE-NMR) experiments.     

Development of cross-linked polystyrene-supported chiral amines featuring a fluorinated linker for gel-phase 19F NMR spectrometry monitoring of reactions

Ten cross-linked polystyrene-supported, protected chiral amines featuring both a spacer, comprising from 5 to 15 atoms, and a fluorinated linker have been successfully prepared. The development of the monitoring technique by gel-phase 19F NMR spectrometry on cross-linked polystyrene derivatives proved to be of high value in four steps of the process, as shown by the comparison of data gathered from both a classic NMR spectrometer and elemental analysis. Gel-phase 19F NMR spectrometry, thus, constitutes a useful technique that complements IR and 13C NMR spectrometries for the qualitative monitoring of reactions. In addition, quantitative determination of the conversion in a given transformation is possible, provided that 19F chemical shifts of the substrate and the product be different enough (Deltadelta>base width), as illustrated by the Mitsunobu coupling process (16-->17). The technique is nondestructive, and the samples used to monitor the reactions may be returned to the reaction medium. Deprotection of the above amines was achieved and furnished eight of the final resins in good to acceptable purity for future applications.     

Analyse conformationnelle de derives carbonylés du furanne et du thiophène par utilisation de la position et de l'intensite des bandes infrarouges

The carbonyl bands of 2-formyl and 3-formyl-furans [¹⁸O] are determined and explained. The magnitude of the inductive and mesomeric effects in 2-acyl and 3-acyl-thiophenes and furans is discussed on the basis of a comparison of the frequencies and the intensities of the v(CO) and v(CC) bands. The conformational preference of some aroyl-furans and aroyl-formyl-furans and the rotation around the C(Ar)-C(O) bonds are related to these parameters.     

3M Petrifilm Staph Express Count plate method for the enumeration of Staphylococcus aureus in selected types of meat, seafood, and poultry: collaborative study

The 3M Petrifilm Staph Express Count plate method was compared with AOAC Official Method 975.55 for the enumeration of Staphylococcus aureus in selected foods. Four foods--cooked, diced chicken; cured ham; smoked salmon; and pepperoni--were analyzed for S. aureus by 12 collaborating laboratories. For each food tested, the collaborators received 8 blind test samples consisting of a control sample, a low inoculation level, a medium inoculation level, and a medium inoculation level with background flora, each in duplicate. The mean log10 counts for the methods were comparable for all 4 foods. The repeatability and reproducibility variances of the 24 h Petrifilm Staph Express Count plate method were similar to those of the 72 h standard method.     

Helicity‐Encoded Molecular Strands: Efficient Access by the Hydrazone Route and Structural Features

Control over the folding of molecular strands may be achieved by appropriate choice of the constituting subunits, in particular for chains of specific heterocycles such as sequences of directly connected pyridine (py) and pyrimidine (pym) rings, which are known to fold into extended helical structures. Since the hydrazone (hyz) group represents an isomorphic analogue of a py site, the condensation of hydrazine and carboxaldehyde derivatives of pym offers a very efficient approach to strands incorporating hyz instead of py units and constituted by sequences of alternating hyz and pym groups. A series of such strands of different lengths, up to ten hyz units, i.e., 1 – 7 , were synthesized. Their spectral properties indicate that they fold indeed into helical shapes. Extensive characterization was performed in solution by ¹HNMR spectroscopy and in the solid state by determination of the crystal structures of eight such strands. They all display the expected helical geometry with up to 3 ¹/₃ turns and direct stacking contacts. The efficiency and flexibility of the synthetic approach as well as its wide potential for generation of diversity through lateral decoration make the (hyz? pym) subunit a particularly attractive helicity codon.     

Evaluation of VIDAs Immuno-concentration Salmonella assay Plus selective plate method (Hektoen enteric,bismuth sulfite,Salmonella identification) for detection of Salmonella in selected foods: collaborative study

The VIDAS Immuno-concentration Salmonella (ICS) plus selective plate method (Hektoen enteric, bismuth sulfite, Salmonella identification) method for the detection of Salmonella was compared to the Bacteriological Analytical Manual (BAM)/AOAC culture method in a collaborative study. Thirty-two laboratories participated in the evaluation. Each laboratory tested one or more of the 6 test products: milk chocolate, nonfat dry milk, dried whole egg, soy flour, ground black pepper, and ground raw turkey. The 2 methods were in agreement for 1,283 of the 1,440 test samples. Of the 157 test samples not in agreement, 82 were VIDAS ICS plus selective plate-positive and BAM/AOAC-negative, and 75 were VIDAS ICS plus selective plate-negative and BAM/AOAC-positive.