Analysis of proteins from a glioma cell line by using micro-scale solution isoelectric focusing in combination with liquid chromatography/tandem mass spectrometry

In this study we have investigated whether micro-solution isoelectric focusing (microsol-IEF) can be used as a pre-fractionation step prior to liquid chromatography/tandem mass spectrometry (LC/MS/MS) and if extensive sample purification of the different fractions is required. We found that, in spite of the high concentrations of buffer and detergents, no clean up of the digested microsol-IEF fractions was necessary before analysis by LC/MS/MS. We also concluded that it is possible to identify at least twice as many proteins in a glioma cell lysate with the combination of microsol-IEF and LC/MS/MS than with LC/MS/MS alone. Furthermore, most of the proteins that were identified from one microsol-IEF fraction by using analytical narrow-range two-dimensional polyacrylamide gel electrophoresis (2D-PAGE) and peptide mass fingerprinting with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) were also identified by LC/MS/MS. Finally, we used the combination of microsol-IEF and LC/MS/MS to compare two sample preparation methods for glioma cells and found that several nuclear, mitochondria, and endoplasmic reticulum proteins were only present in the sample that had been subjected to lipid extraction by incubating the homogenized cells in chloroform/methanol/water.     

Reactions in aminosilane-epoxy prepolymer systems. II. Reactions of alkoxysilane groups with or without the presence of water

The hydrolysis and reactions of alkoxy silane groups have been studied on a model compound (TA) prepared from 2 mol of phenyl glycidyl ether and 1 mol of aminopropyl triethoxy silane. At low (40°C) and high (140°C) temperatures, the monomer conversion and the evolution of the molecular mass are followed by size exclusion chromatography (SEC). During the same reaction time, the evolution of the functional groups, hydroxyl CH? OH, ethoxy ? O? C₂H₅, and siloxane Si? O? Si, is observed by FTIR spectroscopy. Without the presence of water, reactions between hydroxyl and ethoxy silane lead to gelation at the end of the reaction. A by-product, probably a cyclic tetramer is also formed. After the hydrolysis, the reaction of the model compound is quite different. The product of reaction is always soluble, even after a treatment at high temperatures, and the evolution of the molecular mass versus the reaction time seems to correspond to the condensation giving a dead cyclic tetramer. From this study it is evident that the curing cycle has a great influence on the properties of the interface of a composite based on a epoxy matrix.     

Synthesis,structures and mass spectrometry of lanthanide nitrate complexes with tricyclohexylphosphine oxide

The complexes Ln(NO₃)₃(OPCy₃)₃(EtOH)_x (Cy = cyclohexyl, C₆H₁₁x = 0 for Ln = Eu, Er, x = 0.5 for Ln = La, Nd and x = 1 for Ln = Tm, Yb) have been prepared by reaction of lanthanide nitrates with Cy₃PO in ethanol. The single crystal X-ray structures for Ln = La, Nd, Eu, Er, Tm and Yb are reported. The structures for Ln = La–Eu have two molecules in the unit cell in which the nitrates are all bound as bidentate ligands. The unit cell for Ln = Er contains two distinct molecules; one with three bidentate nitrates and one with two bidentate and one monodentate nitrate. The Tm and Yb complexes have one molecule in the unit cell with two bidentate and one monodentate nitrate ligands. The monodentate nitrates are hydrogen bonded to ethanol in the Tm and Yb structures but not in the Er complex. The infrared spectra of the three classes of complex do not readily permit identification of the monodentate nitrate groups. Electrospray mass spectrometry indicates that redistribution/ionisation reactions occur in solution. Ions formed by solvolysis reactions are attributed to gas phase processes associated with the electrospray technique. Tandem mass spectrometry for the La, Ho and Yb complexes shows that in the gas phase loss of Cy₃PO is the sole fragmentation pathway for all but the Yb complex where the higher energy required for initial fragmentation leads to a more complex fragmentation pattern.     

Photoinitiated cationic polymerization with triarylsulfonium salts

Triarylsulfonium salts Ar₃S⁺MX with complex metal halide anions such as BF, AsF, PF, and SbF are a new class of highly efficient photoinitiators for cationic polymerization. In this article we describe several synthetic routes to the preparation of these compounds along with their physical and spectroscopic properties. Mechanistic studies have shown that when these compounds are irradiated at wavelengths of 190–365 nm carbon–sulfur bond cleavage occurs to form radical fragments. At the same time the strong Br??nsted acid HMX_n, which is the active initiator of cationic polymerization that takes place in subsequent “dark” steps, is also produced. A study of the parameters that affect the photolysis of triarylsulfonium salts is reported with a measurement of the absolute quantum yields. The cationic polymerizations of four typical monomers—styrene oxide, cyclohexene oxide, tetrahydrofuran, and 2-chloroethyl vinyl ether—with triarylsulfonium salt photoinitiators are described.     

MnRe(CO)10: A review of the chemical and physical properties of a simple heterobimetallic non-bridged dimer

A review of the chemical and physical properties of MnRe(CO)₁₀ and its derivatives has been undertaken. This heterobimetallic complex is one of the simplest complexes known which contains a bond between two different metals and does not contain bridging groups. The review has revealed that high yield synthetic strategies are known for this complex and the synthetic strategies have bearing for the synthesis of other bimetallic complexes. Kinetic data suggest that information available on monometallic fragments can provide information on the reactivity trends expected for the dimer. However, the second metal is not a neutral spectator and provides a site forsecondary reactions eg for CO substitution. Data on the physical properties of the dimer are sparse and definitive statements ond _Mn-Re·v _Mn-Re, H_Mn-Re etc. cannot be made. This has significant implications for studies on related simple and complex dimer and cluster complexes.     

Synthesis of SBA-15/carbon composite with an ink-bottle-like pore structure by a novel pulse CVD technique

A novel and easy post modification method, pulse chemical vapor deposition (pulse CVD), was developed to tailor the pore-opening of SBA-15 while largely keeping its surface area and pore volume. By using acetylene as carbon precursor and nitrogen as carrier gas, the pore-mouth of SBA-15 was effectively reduced from 8.1 nm to 5.1 nm within 5 min while maintaining the pore body at 8.1 nm. This ink-bottle-structured SBA-15/carbon composite only losses 12% BET specific surface area and 16% total pore volume, respectively. The SBA-15/carbon composite is highly hexagonally ordered and has similar particle morphology as the original SBA-15. The effect of three pore modification factors—the number of cycles of pulse CVD, the ratio of acetylene/nitrogen and the feeding time of carbon precursor, on the final pore structure of the SBA-15/carbon composite is also studied.     

Intramolecular interaction effects and the structure of N2OS and N2O2: An Ab initio study

An ab initio study of O?N? N?S with full geometry optimization has been carried out to corroborate the presence of an interaction between the terminal atoms in this type of structure, which, in O?N? N?O, apparently stabilizes the cis conformer. Using the unscaled 4–31G basis set with a full set of d functions on the sulfur, there is a potential minimun at the trans but not the cis geometry. A gauche conformer with a torsional angle of 77.2° is the most stable. With N₂O₂ this basis set gives potential minima at both the cis and trans geometries, but the trans conformer is slightly more stable, contrary to experiment and the results of (7,3) basis-set calculations reported in the literature in which Gaussian lobe functions were employed. Using a (9,5) basis set there is no longer a potential minimum at the cis geometry, and a gauche structure is more stable than the cis conformer as in the case of N₂OS with the less-extended basis set. Force constants (harmonic and anharmonic), compliance constants, relaxed force constants, and interaction-displacement coordinates for both molecules are compared for key structural elements.     

Control synthesis of isocyanate and alkoxy-silane terminated macromers

The kinetics of the reactions in bulk of 4,4′-dicyclohexyl methane diisocyanate (H₁₂ MDI) and 5-isocyanato-1,3,3-trimethylcyclohexylmethyl isocyanate or isophorone diisocyanate (IPDI) with benzylic alcohol (BZA) and α-hydroxy-ω-methyl ether-terminated polyethylene oxide PEO (M?_w = 350) were studied by size exclusion chromatography (SEC) and ¹³C nuclear magnetic resonance (¹³C-NMR). The substitution effect is exhibited in the case of H₁₂ MDI reactivity. The kinetic constants were calculated by a numerical method. The second-order kinetic mechanism was shown to be valid. In the IPDI case, the cycloaliphatic isocyanate group is shown to be more reactive than the aliphatic group in our conditions, without catalysis, in agreement with previous results from the literature, in our obtained by ¹H-and ¹³C-NMR without any catalyst. The reactivity ratio is found to be on the order of 3. This difference in reactivity of the two isocyanate groups is used for the control synthesis of isocyanate and alkoxy-silane-terminated macromers.     

Structural and process controls of AIEgens for NIR-II theranostics

Aggregation-induced emission (AIE) is a cutting-edge fluorescence technology, giving highly-efficient solid-state photoluminescence. Particularly, AIE luminogens (AIEgens) with emission in the range of second near-infrared window (NIR-II, 1000–1700 nm) have displayed salient advantages for biomedical imaging and therapy. However, the molecular design strategy and underlying mechanism for regulating the balance between fluorescence (radiative pathway) and photothermal effect (non-radiative pathway) in these narrow bandgap materials remain obscure. In this review, we outline the latest achievements in the molecular guidelines and photophysical process control for developing highly efficient NIR-II emitters or photothermal agents with aggregation-induced emission (AIE) attributes. We provide insights to optimize fluorescence efficiency by regulating multi-hierarchical structures from single molecules (flexibilization) to molecular aggregates (rigidification). We also discuss the crucial role of intramolecular motions in molecular aggregates for balancing the functions of fluorescence imaging and photothermal therapy. The superiority of the NIR-II region is demonstrated by fluorescence/photoacoustic imaging of blood vessels and the brain as well as photothermal ablation of the tumor. Finally, a summary of the challenges and perspectives of NIR-II AIEgens for in vivo theranostics is given.

Structural and process controls of NIR-II AIEgens realize manipulating of radiative (R) and nonradiative (NR) decay for precise theranostics.