Preparation and NMR spectra of substituted 2-phenyl-5,5-dialkylimidazolinones

Eighteen substituted 2-phenyl-5,5-dialkylimidazolinones 2 have been prepared by cyclizations of substituted 2-(N-benzoylamino)alkanamides 1. The cyclization of methylamides 1 proceeds at room temperature whereas primary amides are cyclized on boiling. The ¹H and ¹³C nmr spectra of the imidazolinones are presented and the changes in their spectra connected with their protonation in hexadeuteriodimethyl sulfoxide-trifluoroacetic acid mixtures are discussed.     

Bestimmung von Ascorbinsäure auf Grund ihrer in einem Landolt-System ausgeübten reduzierenden Wirkung

Zusammenfassung Im Bromat-Jodid-Ascorbinsäure-System hängt die Zeit, die bis zur Jodausscheidung vergeht, von der Konzentration der Ascorbinsäure ab. Unter entsprechenden Versuchsbedingungen ist die Reaktionszeit proportional der Ascorbinsäurekonzentration. Danach kann die Ascorbinsäure sowohl mit Hilfe der Simultankomparationsmethode, als auch chronometrisch bestimmt werden. Die Genauigkeit ist ± 3% im Bereich von 5 bis 300g/5 ml. Die Grenzen der Bestimmung sind 1g bzw. 1000g Ascorbinsäure in 5 ml.

---

Determination of ascorbic acid on the basis of its reducing action in a landolt system

Summary In the bromate-iodide-ascorbic acid system, the time that elapses until the iodine appears is dependent on the concentration of the ascorbic acid. Under appropriate experimental conditions, the reaction time is proportional to the ascorbic acid concentration. Accordingly, the ascorbic acid may be determined with the aid not only of the simultaneous comparison method but also chronometrically. The precision is ± 3% in the 5–300g/5 ml range. The limits of the determination are 1g and 1000g ascorbic acid in 5 ml respectively.

     

Synthesis, X-ray diffraction analysis and NMR studies of (Z)-2-methyl-3-triphenylstannyl-3-pentene-2-ol

The synthesis of (Z)-2-methyl-3-triphenylstannyl-3-pentene-2-ol and its characterization by an X-ray diffraction study and multinuclear NMR are reported. The tin atom exhibits a distorted tetrahedral SnC₄ geometry with the four Sn---C bond distances experimentally equivalent. The slight distortion from the ideal tetrahedral geometry is because of the presence of a weak intramolecular HO → Sn interaction of 3.012(3) Å which produces a loose four-membered ring. The title compound was characterized in solution by ¹H, ¹³C and ¹¹⁹Sn NMR, and the persistence of the weak intramolecular HO → Sn coordination in solution was revealed by ¹³C and ¹¹⁹Sn secondary isotope multiplet of partially labelled entities (SIMPLE-NMR) experiments.     

Effect of the specific activity of the tracer on rat luteinizing hormone radioimmunoassay

Rat luteinizing hormone /LH/ was labelled with¹²⁵I by the Chloramine T method.¹²⁵I-LH, used as tracer in radioimmunoassay, was separated from the labelling reaction mixture by gel filtration. By using the proper protein/radioiodine ratio in the labelling reaction mixture the specific activity of¹²⁵I-LH was adjusted to 2.5–20.5 MBq g^–1. The influence of the specific activity on the assay parameters as well as on the tracer stability was investigated.     

Die katalytischen Reaktionen bei der Spurenanalyse und die Untersuchung ihrer Mechanismen. II Untersuchung der Tiron—H2O2-Reaktion

Zusammenfassung Die Oxydation von Tiron durch H₂O₂ in basischem Milieu wird durch Kobalt stark katalysiert. Die katalysierten Vorgänge sind p_H-abhängig. Im p_H-Bereich 9 bis 11 entsteht ein rotes Oxydationsprodukt unbekannter Struktur; wahrscheinlich handelt es sich um ein o-Chinonderivat. Mit Hilfe der katalytischen Reaktion können 10^–4 g Kobalt/5 ml nachgewiesen werden. In diesem p_H-Bereiche stabilisiert Tiron H₂O₂ bei 100° C, bei 40° C jedoch katalysiert es — in Abhängigkeit von der Konzentration des Tirons — den Zerfall des H₂O₂. Der Effekt spielt im Mechanismus der katalysierten Reaktion wahrscheinlich eine Rolle, doch können die Zusammenhänge an Hand der bisher veröffentlichten Angaben nicht klar gedeutet werden. Der die Reaktion begleitende bzw. ihr folgende Nebenvorgang kann auf den katalytischen Zerfall des H₂O₂ · OOH-Komplexes zurückgeführt werden. Zwischen p_H 7 und 9 entsteht bei der katalysierten Reaktion Semichinon, über p_H 11 oxydiert Tiron das Semichinon unter Ringspaltung und Abspaltung von 1 Mol Sulfat zu Verbindungen, die Säurecharakter tragen.

---

Summary The oxidation of Tiron by H₂O₂ in basic milieu is strongly catalyzed by cobalt. The catalyzed reactions are p_H-dependent. A red oxidation product of unknown structure results in the p_H range 9 to 11; probably it is ano-quinone product. As little as 10^–4 g cobalt/5ml can be detected by this catalytic action. In this p_H region, Tiron stabilizes H₂O₂ at 100° C, but at 45° C it catalyzes the decomposition of H₂O₂, in relation to the concentration of the Tiron. The effect probably plays a rôle in the mechanism of the catalyzed reaction, but the up to now published informations are not sufficient to clarify the relationships. The auxiliary process, accompanying or following the reaction, can be attributed to the catalytic decomposition of the H₂O₂-OOH^– complex. Semiquinone is produced by the catalytic reaction between p_H 7 and 9, above p_H 11, the Tiron oxidizes the semiquinone with opening of the ring and splitting off of 1 mol of sulfate yielding compounds which have an acidic character.

---

Résumé L'oxydation du Tiron par H₂O₂ en milieu basique est fortement catalysée par le cobalt. Les processus de catalyse dépendent du p_H. Dans le domaine de p_H de 9 à 11, il apparaît un produit d'oxydation rouge, de structure inconnue; il s'agit probablement d'un dérivé de l'o-quinone. La réaction catalytique permet de déceler 10^–4 g cobalt/5 ml. Dans ce domaine de p_H, à 100° C le Tiron stabilise l'eau oxygénée et à 45° C, suivant sa concentration, il catalyse la décomposition de l'eau oxygénée. L'effet joue probablement un rôle sur le mécanisme de la réaction catalysée; on ne peut pourtant pas interpréter clairement ces relations au moyen des indications publiées jusqu'ici. Le processus secondaire qui accompagne la réaction ou qui la suit, peut être ramené à la décomposition catalytique du complexe H₂O₂-OOH^–. Entre p_H 7 et 9, la réaction catalysée donne naissance à une semiquinone; au-dessus de p_H 11, le Tiron oxyde la semi-quinone avec ouverture du cycle et élimination d'une mole de sulfate ce qui donne ensuite des composés qui portent le caractère acide.

     

Atomic spectroscopy for detection in thermal analysis

An atomic absorption spectrophotometer is coupled to a conventional thermoanalytical quartz furnace as used for TG and DTG to detect the thermally evolved products. In this combined system, the dry aerosol (smoke) obtained by cooling the vapour evolved is transported from the furnace to the flame for metal-specific atomic absorption detection. The particular design of the furnace outlet promotes the formation of stable aerosols. Optimum experimental conditions were determined, using zinc chloride solution, by varying the specimen mass, the heating rate and the flow rate of the furnace gas at a linear temperature program. The absorbancevs. temperature curves obtained with this method for various zinc compounds are compared with the corresponding DTG curves. The applicability of the technique for studying heterogeneous reactions with carbon tetrachloride and hexane vapours is presented. The utilization of an atomic absorption spectrophotometer equipped with a quartz cuvette for detecting the thermal evolution of mercury vapours is described, as well as detection potentials by molecular absorption (for NO and NH₃) and light scattering (for smoke evolved from organic matter). The results obtained with the suggested methods may, in some respects, valuably complement the results achieved with DTG and with flame ionization detection.

---

Zusammenfassung Ein Atomabsorptionsspektrometer wurde mit einem konventionellen thermoanalytischen Quarzofen gekoppelt um thermische Abspaltprodukte nachzuweisen. In diesem kombinierten System wird das durch Kühlung des entwickelten Dampfes erhaltene Aerosol (Rauch) vom Ofen in die Flamme für den metallspezifischen Atomabsorptionsnachweis übergeleitet. Die spezielle Ausbildung der Austrittsöffnung gewährleistet die Bildung eines stabilen Aerosols. Die optimalen Versuchsbedingungen wurden durch Zinkchloridlösungen bei Anderung der Probenmasse, der Aufheizgeschwindigkeit und der Strömungsgeschwindigkeit des Ofengases im linearen Temperaturprogramm ermittelt. Die mit dieser Methode für verschiedene Zinkverbindungen erhaltenen Absorptions—Temperatur-Kurven wurden mit den entsprechenden DTG-Kurven verglichen. Die Anwendbarkeit dieser Technik bei dem Studium heterogener Reaktionen mit Kohlenstofftetrachlorid und Hexandämpfen wird gezeigt. Der Einsatz eines mit einer Quarzküvette zum Nachweis der thermischen Entwicklung von Quecksilberdampf versehenen Atomabsorptionsspektrometers wird beschrieben, sowie die Nachweisgrenze durch molekulare Absorption (für NO und NH₃) und Lichtstreuung (für aus organischem Material entwickelten Rauch). Die bei den beschriebenen Methoden erhaltenen Ergebnisse können, in mancher Hinsicht, die durch DTG und Flammenionisationsnachweis erhaltenen Ergebnisse wertvoll ergänzen.

---

- , , . (), , . . , . — , , -. . - , , , ( NO NH₃) ( , ). , , , - .

---

---

Presented in part at the 24th Hungarian Conference on Analytical Sptecroscopy, Miskolc, June 15–18, 1981. Abstracts pp. 159–162.

---

The authors wish to express their thanks to S. Gál for his assistance in the present application of the temperature programmer developed by him and his group, and for the valuable discussions on the subject. Thanks are also due to K. Tomor and J. Kmives who participated in the comparative thermoanalytical measurements and their analysis.     

Regulation of the excitation energy utilization in the photosynthetic apparatus of chlorina f2 barley mutant grown under different irradiances

Acclimation of the photosynthetic apparatus of chlorophyll b-less barley mutant chlorina f2 to low light (100 micromolm(-2)s(-1); LL) and extremely high light level (1000 micromolm(-2)s(-1); HL) was examined using techniques of pigment analysis and chlorophyll a fluorescence measurements at room temperature and at 77 K. The absence of chlorophyll b in LL-grown chlorina f2 resulted in the reduction of functional antenna size of both photosystem II (by 67%) and photosystem I (by 21%). Chlorophyll fluorescence characteristics of the LL-grown mutant indicated no impairment of the utilization of absorbed light energy in photosystem II photochemistry. Thermal dissipation of excitation energy estimated as non-photochemical quenching of minimal fluorescence (SV(0)) was significantly higher as compared to the wild-type barley grown under LL. Despite impaired assembly of pigment-protein complexes, chlorina f2 was able to efficiently acclimate to HL. In comparison with chlorina f2 grown under LL, HL-grown chlorina f2 was characterized by unaffected maximal photochemical efficiency of photosystem II (F(V)/F(M), doubled content of both beta-carotene and the xanthophyll cycle pigments and considerably reduced efficiency of excitation energy transfer from carotenoids to chlorophyll a. The enormous xanthophyll cycle pool size was however associated with reduced SV(0) capacity. We suggest that the substantial part of the xanthophyll cycle pigments is not bound to the remaining pigment-protein complexes and acts as filter for excitation energy, thereby contributing to the efficient photoprotection of chlorina f2 grown under HL.     

Interference between the hydrogen bonds to the two rings of nicotine

The biochemical transport and binding of nicotine depends on the hydrogen bonding between water and binding site residues to the pyridine ring and the protonated pyrrolidinium ring. To test the independence of these two moderately separated hydrogen-bonding sites, we have calculated the structures of clusters of protonated nicotine with water and a bicarbonate anion, benzene, indole, or a second water molecule. Unprotonated nicotine-water clusters have also been studied for contrast. The potential energy surfaces are first explored with an intermolecular anisotropic atom-atom model potential. Full geometry optimizations are then carried out using density functional theory to include nonadditive terms in the interaction energies. The presence of the charge on the pyrrolidine nitrogen removes the conventional hydrogen-bonding site on the pyridine ring. The hydrogen-bond ability of this site is nearly recovered when the protonated pyrrolidinium ring is bound to a bicarbonate anion, whereas its interaction with benzene shows a much smaller effect. Indole appears to partially restore the hydrogen-bond ability of the pyridine nitrogen, although indole and benzene both pi-bond to the pyrrolidinium ring. A second hydrogen-bonding water produces a significant conformational distortion of the nicotine. This demonstrates the limitations of the conventional qualitative predictions of hydrogen bonding based on the independence of molecular fragments. It also provides benchmarks for the development of atomistic modeling of biochemical systems.     

An experimental and theoretical study of the Cp2VO2CO: use of 13CO3(2-) for structure investigation of d1-metallocene complexes

EPR study has shown that the anticancer agent vanadocene dichloride (Cp2VCl2) interacts with carbonate contained in physiological solutions. Chelate complex Cp2VO2CO (|A(iso)(51V)| = 175.1 MHz, g(iso) = 1.9861) is the only paramagnetic species formed in the range about the physiological pH (5.5-11.0). The super-hyperfine coupling (|a(iso)(13C)| = 24.1 MHz) was evidenced at measurements using 13C labelled carbonate. The structure of carbonate complex was validated by comparison of observed and theoretical calculated HFC tensors (at the density functional level of theory).     

Determination of trace elements in Na-bentonitic clay by INAA in Turkey

Instrumental neutron activation analysis was applied to the determination of trace elements in a Na-bentonitic clay. The irradiation was done in the Triga Mark II type reactor of ITU Nuclear Energy Institute. The sample was irradiated in two steps for short- and long- lived isotopes. After irradiation, spectra were taken using a germanium detector, multichannel analyzer Canberra System 100 and a fitting program called Sampo 90. The spectra of short-lived isotopes were analyzed to determine Al, Mg, Na, K, Ca, Ti elements and Mn, V trace elements. The spectra of long-lived isotopes were analyzed to determine Sc, Br, Sb, Cs, La, Ce, Sm, Yb, Hf, Pa, Np trace elements.