Pseudo-Binary Phase Diagram of LiNH2-MH (M = Na,K) Eutectic Mixture

The hunt for a cleaner energy carrier leads us to consider a source that produces no toxic byproducts. One of the targeted alternatives in this approach is hydrogen energy, which, unfortunately, suffers from a lack of efficient storage media. Solid-state hydrogen absorption systems, such as lithium amide (LiNH₂) systems, may store up to 6.5 weight percent hydrogen. However, the temperature of hydrogenation and dehydrogenation is too high for practical use. Various molar ratios of LiNH₂ with sodium hydride (NaH) and potassium hydride (KH) have been explored in this paper. The temperature of hydrogenation for LiNH₂ combined with KH and NaH was found to be substantially lower than the temperature of individual LiNH₂. This lower temperature operation of both LiNH₂-NaH and LiNH₂-KH systems was investigated in depth, and the eutectic melting phenomenon was observed. Systematic thermal studies of this amide-hydride system in different compositions were carried out, which enabled the plotting of a pseudo-binary phase diagram. The occurrence of eutectic interaction increased atomic mobility, which resulted in the kinetic modification followed by an increase in the reactivity of two materials. For these eutectic compositions, i.e., 0.15LiNH₂-0.85NaH and 0.25LiNH₂-0.75KH, the lowest melting temperature was found to be 307 °C and 235 °C, respectively. Morphological studies were used to investigate and present the detailed mechanism linked with this phenomenon.     

Sensitive and Multiplexed On‐chip microRNA Profiling in Oil‐Isolated Hydrogel Chambers

Although microRNAs (miRNAs) have been shown to be excellent indicators of disease state, current profiling platforms are insufficient for clinical translation. Here, we demonstrate a versatile hydrogel‐based microfluidic approach and novel amplification scheme for entirely on‐chip, sensitive, and highly specific miRNA detection without the risk of sequence bias. A simulation‐driven approach is used to engineer the hydrogel geometry and the gel‐reaction environment is chemically optimized for robust detection performance. The assay provides 22.6 fM sensitivity over a three log range, demonstrates multiplexing across at least four targets, and requires just 10.3 ng of total RNA input in a 2 hour and 15 minutes assay.     

Thermodynamics and kinetics of hydrogen absorption–desorption of vanadium synthesized by aluminothermy

This paper studies the addition (0–40% w/w) of natural zeolite (NZ, 84% clinoptilolite) in blended cements made with Portland cement (PC) with low and medium C₃A content. The isothermal calorimetry was used to understand the effect of NZ on the early cement hydration. For low C₃A cement, the addition of NZ produces mainly a dilution effect and then the heat released curve is similar to plain cement with lower intensity. For medium C₃A cement, the curve shows the C₃S peak in advance and a high intensity of third peak attributed to C₃A hydration. The high cation fixed of NZ reduces the ions concentration (especially alkalis) in the mixing water stimulating the PC hydration. The flowability decreases when the NZ replacement level increases. Results of Fratini’s test show that NZ with both PCs used presents slow pozzolanic activity. At early age, XRD and FTIR analyses confirm that hydration products are the same as that of the corresponding PC and the CH is progressively reduced after 28 days and some AFm phases (hemi- and monocarboaluminate) appear depending on the NZ percentage and the PC used. For low replacement levels, the compressive strength is higher than the corresponding PC from 2 to 28 days. For high replacement levels, the early compressive strength is lower than that of corresponding plain PC and the pozzolanic reaction improves the later compressive strength of blended cements.     

Copper-free click conjugation of methotrexate to a PAMAM dendrimer platform

The synthesis of a generation 5 (G5) poly(amidoamine) (PAMAM) dendrimer platform having cyclooctyne ligands that were subsequently be used for a copper-free Huisgen 1,3-dipolar cycloaddition (click reaction) with azido modified methotrexate is described. The G5 PAMAM dendrimer was first partially (70%) acetylated and then coupled with 20 cyclooctyne ligands through amide bonds. The remaining primary amine groups on the dendrimer surface were neutralized by acetylation. The platform was then ‘clicked’ with different numbers (5, 10, and 17) of γ-azido functionalized methotrexate. The copper-free click reactions were stoichiometric with excellent yields.     

Precise simulation of the freezing transition of supercritical Lennard-Jones

The fluid-solid transition of the Lennard-Jones model is analyzed along a supercritical isotherm. The analysis is implemented via a simulation method which is based on a modification of the constrained cell model of Hoover and Ree. In the context of hard-sphere freezing, Hoover and Ree simulated the solid phase using a constrained cell model in which each particle is confined within its own Wigner-Seitz cell. Hoover and Ree also proposed a modified cell model by considering the effect of an external field of variable strength. High-field values favor configurations with a single particle per Wigner-Seitz cell and thus stabilize the solid phase. In previous work, a simulation method for freezing transitions, based on constant-pressure simulations of the modified cell model, was developed and tested on a system of hard spheres. In the present work, this method is used to determine the freezing transition of a Lennard-Jones model system on a supercritical isotherm at a reduced temperature of 2. As in the case of hard spheres, constant-pressure simulations of the fully occupied constrained cell model of a system of Lennard-Jones particles indicate a point of mechanical instability at a density which is approximately 70% of the density at close packing. Furthermore, constant-pressure simulations of the modified cell model indicate that as the strength of the field is reduced, the transition from the solid to the fluid is continuous below the mechanical instability point and discontinuous above. The fluid-solid transition of the Lennard-Jones system is obtained by analyzing the field-induced fluid-solid transition of the modified cell model in the high-pressure, zero-field limit. The simulations are implemented under constant pressure using tempering and histogram reweighting techniques. The coexistence pressure and densities are determined through finite-size scaling techniques for first-order phase transitions which are based on analyzing the size-dependent behavior of susceptibilities and dimensionless moment ratios of the order parameter.     

A theoretical investigation of Zn?Zn and Be?Be one electron bond

Attachment of one electron to 1,2-diBeX-benzene and 1,2-diZnX-benzene derivatives leads to the formation of stronger Be Be and Zn Zn interaction compared to the neutral one. This is reflected in the dramatic shortening of the Be Be and Zn Zn distance. The formation of these 2-center-1-electron bonds have also been confirmed by topological survey of electron density using quantum theory of atoms in molecules and electron localization function. The formation of these bonds is expected to render stability to these radical anions. These radical anions are stable toward electron detachment and computed bond dissociation energy values are also significant.     

Evidence for protein radical-mediated nuclear tunneling in fatty acid alpha-oxygenase

Rice alpha-oxygenase (RalphaO) catalyzes the insertion of O2 into the Calpha-H bond of various fatty acids. The mechanism is thought to involve a tyrosyl radical as the oxidant on the basis of comparisons to the structurally homologous cyclooxygenase enzymes. Kinetic and spectroscopic results presented here for the wild-type RalphaO and the Tyr379Phe mutant indicate an irreversible H* abstraction mechanism and support the involvement of the proposed catalytic Tyr*. In addition, very large, weakly temperature dependent deuterium kinetic isotope effects (approximately 50) are observed, consistent with extensive nuclear tunneling. RalphaO, thus, presents a novel example where such quantum effects are associated with an amino acid radical-utilizing enzyme.     

Simultaneous Continuous Removal of Cr(VI) and Phenol from Binary Synthetic Simulated Waste Water in Tea Waste Packed Bed Column: Kinetic Modeling

In this study, simultaneous co-adsorption of Cr(VI) and phenol was carried out in a continuous packed-bed reactor packed with tea waste biomass. The experiments were carried out using binary synthetic simulated solution containing 100 mg/L of Cr(VI) and 50 mg/L of phenol. The binary synthetic solution was passed through the packed-bed reactor at different flow rates (5.46, 8.19, and 16.3 mL/min) and bed height (36, 54, 72, and 93 cm). The pH of the binary synthetic solution was 5 as the maximum simultaneous percentage removal of Cr(VI) and phenol was obtained at this pH reported in our previous study.^[1 Gupta, A. and Balomajumder, C. (2015) J. Water Proc. Eng., 6: 1–10.[Crossref] , [Google Scholar]^] The effects of flow rate and bed depth onto the simultaneous percentage removal of Cr(VI) and phenol were investigated. According to the average percentage error (?%) and average relative error (ARE %) calculated for various kinetic models reveal that Yoon–Nelson model for Cr(VI) and Thomas model for phenol best describes the experimental data. The maximum adsorption capacity of tea waste biomass in a packed-bed reactor for Cr(VI) and phenol was 57.04 and 27.96 mg/g, respectively. The packed bed of the column was regenerated using 2 N NaOH.     

Improvement in the Performance of Composite Cathode via Solid Electrolyte for High Electrochemical Performance of Li–S Battery

Commercialization of Li–S in present scenario is obstructed by poor performance of cathode and its compatibility with electrolyte used. Here in this work, in order to improve the electrochemical performance all solid state Li–S battery, solid electrolyte (SE) formed by composition of lithium sulfide (Li₂S) and phosphorus pentasulfide (P₂S₅) combinedly called LPS is used. The modified carbon in the form of graphene oxide (GO) and reduced graphene oxide (rGO) as additive is used to provide better electron conduction pathway. High conductivity of the order 10⁻⁴ S cm⁻¹ of prepared LPS overcomes the major drawback of insulating nature of sulfur. The coin cells are fabricated by using above mentioned material as a cathode material, LPS as SE, and lithium foil as anode. The prepared nanocomposites are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) to study structural and morphological properties. Energy dispersive X-ray spectroscopy (EDS) images of the cathode surface confirms the uniform spreading of material. The electrochemical performance of coin cell is studied by Galvanostatic charge-discharge plot at 0.1 C to check the compatibility of composite and electrolyte prepared. The cells having additive material GO and rGO with host sulfur show better results as compared to the cell having pristine sulfur.     

Studies on biodegradability of copolymers of lactic acid, terephthalic acid and ethylene glycol

The copolymers were synthesized by the condensation of lactic acid, terephthalic acid and ethylene glycol. Synthesized copolymers were characterized for various properties such as acid value, hydroxyl value and number average molecular weight, etc. The copolymers were analyzed by FTIR. Copolymers were biodegraded by different fungal species such as Aspergillus sp., Mucor sp., Alternaria sp. and Rhizopus sp., etc. The extent of biodegradation was examined by weight loss and scanning electron microscopy. Biodegradation of copolymer with greater amount of lactic acid was faster than the biodegradation of copolymer with lesser amount of lactic acid.