A new class of interior solutions for a stress-energy tensor of Segré characteristic [111, 1]

The interior solutions of (the tetrad versions of) Einstein's field equations withT _AB having Segré characteristic [111, 1] (which has all four eigenvalues distinct), are investigated. For this purpose amixed method, which combines Synge'sg method andT method, is introduced. Some of the tetrad equations are solved for the metric functions while the remaining equations are used to define the corresponding components ofT _AB . As necessary conditions of the consistency of the mixed method the conservation equationsT ^AB _B =0 are explicitly verified. Several simplifications and analysis of some differential inequalities show the existence of a new class of solutions which, in addition to having Segré characteristic [111, 1], also satisfy the strong energy conditions of Hawking and Ellis.This Author is a member of the Theoretical Sciences Institute, Simon Fraser University, Burnaby, B.C., V5A 1S6, Canada.     

Single-step preparation and catalytic activity of mesoporous MCM-41 and SBA-15 silicas functionalized with perfluoroalkylsulfonic acid groups analogous to Nafion

Preparation of hybrid organic-inorganic MCM-41 and SBA-15 silicas functionalized with perfluoroalkylsulfonic acid groups has been achieved in a single step by reacting the mesoporous silicas with 1,2,2-trifluoro-2-hydroxy-1-trifluoromethylethane sulfonic acid beta-sultone; the catalysts showed higher activity than commercial Nafion-silica composite for the esterification of long chain fatty acids with ethanol.     

Surfactant tail length-dependent lipase activity profile in cationic water-in-oil microemulsions

The catalytic activity of Chromobacterium viscosum lipase (CV-lipase) was estimated across varying surfactant tail lengths (C-10-C-18) in water-in-oil (w/o) microemulsions of cationic surfactants containing four different hydroxyethyl-substituted head groups. An attempt to find a correlation, if any, between the activity of interfacially solubilized lipase and the varying surfactant tails was made for the first time in micellar enzymology. The second-order rate constant, k2, in lipase-catalyzed hydrolysis of p-nitrophenyl-n-hexanoate at pH 6.0 and 25 degrees C shows an improvement in enzyme activity (approximately 30-140%) across different head groups of amphiphiles with increasing tail lengths in varying solution compositions. Improvement of enzyme activity is prominent in ascending from C-10 to C-14/C-16, depending on the nature of polar head group. The hydrolytic activity of lipase in different surfactant (50 mM)/water/isooctane/n-hexanol with varying z= [alcohol]/[surfactant] (6.4 or 4.8) was amplified by 25-250% with increment in surfactant tail length in comparison with widely used cationic w/o microemulsions having solution compositions (z=16). As a notable outcome of this research, we found w/o microemulsions of 25 mM tetradecyltrimethylammonium bromide/water/isooctane/n-hexanol (z=8) producing the highest ever activity of lipase in any w/o microemulsions.     

A new cytokinin from the fruits of zantedeschiaaethiopica

A new purine derivative with cytokinin activity was isolated from the cuckoo-pint fruits ($\text{Zantedeschia}$$\text{aethiopica}$) and identified as 6-(o-hydroxybenzylamino)-2-methylthio-9-β-D-glucofuranosylpurine $\text{1}$.     

Precipitation from homogeneous solution by photochemical action: determination of thorium

Thorium was precipitated from homogeneous solution by photochemical reduction of periodate to iodate in a solution containing thorium and perchloric acid, by means of a 2537 A low-pressure mercury vapour lamp. For weighing, the precipitate was redissolved, precipitated once as thorium hydroxide, and finally as thorium oxalate, which was ignited to thorium dioxide. Quantitative results were obtained in the range 35-180 mg of thorium.     

Interaction of acridine orange monohydrochloride dye with sodiumdodecylsulfate, (SDS) cetyltrimethylammoniumbromide (CTAB) and p-tert-octylphenoxypolyoxy ethanol (Triton X 100) surfactants

Summary Results of spectrophotometric, conductometric and dialysis studies on the interaction of acridine orange monohydrochloride dye with sodiumdodecylsulfate (anionic), cetyltrimethylammoniumbromide (cationic) and Triton X 100 (nonionic) surfactants have been reported. The anionic surfactant, SDS has been observed to undergo both electrostatic and hydrophobic interactions with the dye cation. Aggregation of the dye molecules can be destroyed when the surfactant is in large excess, whereas, excess dye can check micellization of SD S. At a ratio of AO:SDS=1:7 and above, dye embedded mixed micelles are formed. These remain in a separate phase, probably as coacervates. At lower ratios than 1:7, aggregation of dye molecules is induced, which being complexed with SDS become stabilized as colloids. The colloid and the coacervate have been observed to be thermally stable, negatively charged materials that can be broken by salts, and cations of higher valency are more effective in this regard. An 1:3 = AO:SDS colloid has beeen found to be sufficiently large like the coacervates to pass through a membrane having cut off permeability for molecular weights 12,000 and above. All the above features of AO-SDS interaction have been observed to be absent for AO-CTAB and AO-TX 100 systems, Even hydrophobic interaction has played an insignificant role in these cases. Thus, the dye cation, the cationic and the nonionic surfactants have almost retained their self physicochemical identities in solution in the presence of each other. Electrostatic interaction is thus the primary requirement for acridine orange-surfactant (anionic) system; the hydrophobic effect is secondary and may become co-operative.With 9 figures and 2 tables     

Studies on ion association. Calorimetric study of the formation of monoazido complexes of Ni(II), Zn(II) and Cd(II)

From rehydration experiments the hydrates Ba(OH)₂ · 8 H₂O, Ba(OH)₂ · 3 H₂O β-Ba(OH)₂, · 1 H₂O, and γ-Ba(OH)₂ · 1 H₂O have been found in the system Ba(OH)₂-H₂O. Thermoanalytical measurements (DTA, TG, DTG, high temperature X-ray diffraction, high temperature Raman scattering) on these hydrates are reported. Thermal decomposition of Ba(OH)₂ · 8 H₂O and Ba(OH)₂ · 3 H₂O always results in the formation of β-Ba(OH)₂ · 1 H₂O, the stable form of the monohydrates at ambient temperature. Dehydration of β- and γ-Ba(OH)₂ · 1 H₂O, both of which form anhydrous β-Ba(OH)₂ as the first product of decomposition, starts at 105 and 115°C, respectively. Single crystals of Ba(OH)₂ · 3 H₂O and γ-Ba(OH)₂ · 1 H₂O were prepared from Ba(OH)₂ · 8 H₂O meltings and from ethanolic solutions of Ba(OH)₂ , respectively. The crystal data are: Ba(OH)₂ · 3 H₂O (orthorhombic, Pnma): a = 764.0(2), b = 1140,3(5), c = 596.5(1) pm, Z = 4; γ-Ba(OH)₂ · 1 H₂O (monoclinic, P2₁/m or P2₁): a = 704.9(2), b = 418.4(1), c = 633.3(1) pm, β = 111.45(2)°, Z = 2.     

The determination of molybdenum and tungsten in sea and surface water

A simple method for the determination of molybdenum and tungsten in sea and surface water is presented. Molybdenum and tungsten are concentrated on activated charcoal by adsorption as the ammonium pyrrolidine dithiocarbamate complex; the optimal pH for adsorption is 1.3. Mo and W are then determined by thermal neutron activation, forming ⁹⁹Mo (T_{$\text{1}\text{2}$} = 66.7 h) and ¹³⁷W (T_{$\text{1}\text{2}$} = 23.8 h), respectively. The ^99mTc daughter of ⁹⁹Mo is measured as soon as the equilibrium between ^99mTc(T_{$\text{1}\text{2}$}= 6 h) and ⁹⁹Mo is established. The detection limits are 0.05 μg Mo l^-1 and 0.05 μg W l^-1 (or 0.001 μg W l^-1 after a simple chemical separation).     

A carbazole-based polymeric azodye

A new polymeric azodye has been synthesized from carbazole by diazotization of its derivative N-methylcarbazole-3,6-diamine and subsequent coupling reaction with 2,2-bis(4-hydroxyphenyl-3-sulfonate-Na)-propane prepared from bisphenol-A. Its physico-chemical, electrical, and thermal properties have been characterized; finally, its application to the preparation of colored semiconductive films from polyvinyl alcohol has been studied.     

Formatation of pore structure in tape-cast alumina membranes – effects of binder content and firing temperature

Disc type ceramic aluminium oxide membrane has been prepared by tape casting technique. Thickness of this single layer membrane is in the range 200–300 μm. Porosity and pore size distribution have been determined by mercury porosimetry. Polymeric binder content of the green tape and the firing temperature are found to have strong influence on the average pore size, pore size distribution and overall porosity. Higher binder content promotes agglomeration of the ceramic particles, which on firing leads to wider pore size distribution and formation of closed pores. Pore coarsening is observed with increasing firing temperature.