Metallsubstituierte Phosphaalkene und Acylphosphane. 31. Zur Reaktivität von (η5-C5Me5)(CO)2FeP = C(NMe2)2 gegenüber Zinndichlorid. Röntgenstrukturanalyse von {(η5-C5Me5)[η1-(Me2N)2C = P?P = C(NMe2)2](CO)2Fe}+{[Me2N)2C]2P}+(FeCl4)2−

Transition-Metal Substituted Phosphaalkenes and Acyl Phosphanes. 31 [1] Reactivity of (η⁵-C₅Me₅)(CO)₂FeP = C(NMe₂)₂ towards Tin Dichloride. X-Ray Structure Analysis of {(η⁵-C₅Me₅)[η¹-(Me₂N)₂C = P? P = C(NMe₂)₂](CO)₂Fe}⁺{[Me₂N)₂C]₂P}⁺(FeCl₄)^2? Reaction of metallophosphaalkene (η⁵-C₅Me₅)(CO)₂ · FeP = C(NMe₂)₂ ( 1 ) with anhydrous tin dichloride affords the salt-like compound {(η⁵-C₅Me₅)[η¹-(Me₂N)₂C = P? P = C(NMe₂)₂] · (CO)₂Fe}⁺{[(Me₂N)₂C]₂P}⁺(FeCl₄)^2? 5 which is characterized by single crystal X-ray analysis and spectra (IR, ¹H, ³¹P-NMR).     

Mechanical Properties of Poly(dimethylsiloxane)-block-poly(2-methyloxazoline) Polymersomes Probed by Atomic Force Microscopy

Poly(dimethylsiloxane)-block-poly(2-methyloxazoline) (PDMS-b-PMOXA) vesicles were characterized by a combination of dynamic light scattering (DLS), cryogenic transmission electron microscopy (cryo-TEM), and atomic force microscopy imaging and force spectroscopy (AFM). From DLS data, a hydrodynamic radius of ～150 nm was determined, and cryo-TEM micrographs revealed a bilayer thickness of ～16 nm. In AFM experiments on a silicon wafer substrate, adsorption led to a stable spherical caplike conformation of the polymersomes, whereas on mica, adsorption resulted also in vesicle fusion and formation of bilayer patches or multilayer stacks. This indicates a delicate balance between the mechanical stability of PDMS-b-PMOXA polymersomes on one hand and the driving forces for spreading on the other. A Young's modulus of 17 ± 11 MPa and a bending modulus of 7 ± 5 × 10(-18) J were derived from AFM force spectroscopy measurements. Therefore, the elastic response of the PDMS-b-PMOXA polymersomes to external stimuli is much closer to that of lipid vesicles compared to other types of polymersomes, such as polystyrene-block-poly(acrylic acid) (PS-b-PAA).     

Benzene-1,3,5-tricarboxamide: a versatile ordering moiety for supramolecular chemistry

After their first synthesis in 1915 by Curtius, benzene-1,3,5-tricarboxamides (BTAs) have become increasingly important in a wide range of scientific disciplines. Their simple structure and wide accessibility in combination with a detailed understanding of their supramolecular self-assembly behaviour allow full utilization of this versatile, supramolecular building block in applications ranging from nanotechnology to polymer processing and biomedical applications. While the opportunities in the former cases are connected to the self-assembly of BTAs into one-dimensional, nanometer-sized rod like structures stabilised by threefold H-bonding, their multivalent nature drives applications in the biomedical field. This review summarises the different types of BTAs that appeared in the recent literature and the applications they have been evaluated in. Currently, the first commercial applications of BTAs are emerging. The adaptable nature of this multipurpose building block promises a bright future.     

Cis-/Trans-Isomerie bei Bis-(trisalkoxy)-hexavanadaten: cis-Na2[VO7(OH)6{(OCH2)3CCH2OH}2] · 8 H2O,cis-(CN3H6)3[VIVVO13{(OCH2)3CCH2OH}2] · 4,5 H2O und trans-(CN3H6)2[VO13{(OCH2)3CCH2OH}2] · H2O

Cis-/Trans-Isomerism of Bis-(trisalkoxy)-hexavanadates: cis-Na₂[V O₇(OH)₆{(OCH₂)₃CCH₂OH}₂] · 8 H₂O, cis-(CN₃H₆)₃[V^IVV O₁₃{(OCH₂)₃CCH₂OH}₂] · 4.5 H₂O and trans-(CN₃H₆)₂[V O₁₃{(OCH₂)₃CCH₂OH}₂] · H₂O Polyoxovanadates with distorted Lindquist-structure, in which six of the twelve μ₂-oxygen atoms are formally replaced by the oxygen atoms of two coordinated pentaerythritol ligands, can be prepared by a simple method in an aqueous medium. The “fully reduced”, six-fold protonated compound cis-Na₂[VO₇(OH)₆{(OCH₂)₃CCH₂OH}₂] · 8 H₂O ( 1 ), the mixed valence species cis-(CN₃H₆)₃[V^IVVO₁₃{(OCH₂)₃CCH₂OH}₂] · 4.5 H₂O ( 2 ) containing one localized V^IV centre and the “fully oxidized” compound trans-(CN₃H₆)₂[VO₁₃{(OCH₂)₃CCH₂ · OH}₂] · H₂O ( 3 ) have been synthesized and characterized by UV/VIS-, IR- and EPR-spectroscopy, by magnetic measurements, cyclic voltammetry and by a single-crystal X-ray structure analysis. The organic {(CH₂)₃CCH₂OH}³⁺-groups tend to cap the triangular faces formed by μ₂-oxygen atoms of the central approximately octahedral {V₆O₁₉}-unit. Therefore the anions of bis-(trisalkoxy)-hexavanadates can exist in a trans-form as well as in an isomeric cis-form referring to a “basic” plane of four vanadium atoms of the {V₆}-octahedron. The different relative positions of the ligands have a significant influence on the redox potentials of the compounds. For structural details see “Inhaltsübersicht”.     

Luminescence properties of C-diazaborolyl-ortho-carboranes as donor-acceptor systems

Seven derivatives of 1,2-dicarbadodecaborane (ortho-carborane, 1,2-C(2)B(10)H(12)) with a 1,3-diethyl- or 1,3-diphenyl-1,3,2-benzodiazaborolyl group on one cage carbon atom were synthesized and structurally characterized. Six of these compounds showed remarkable low-energy fluorescence emissions with large Stokes shifts of 15100-20260 cm(-1) and quantum yields (Φ(F)) of up to 65% in the solid state. The low-energy fluorescence emission, which was assigned to a charge-transfer (CT) transition between the cage and the heterocyclic unit, depended on the orientation (torsion angle, ψ) of the diazaborolyl group with respect to the cage C-C bond. In cyclohexane, two compounds exhibited very weak dual fluorescence emissions with Stokes shifts of 15660-18090 cm(-1) for the CT bands and 1960-5540 cm(-1) for the high-energy bands, which were assigned to local transitions within the benzodiazaborole units (local excitation, LE), whereas four compounds showed only CT bands with Φ(F) values between 8-32%. Two distinct excited singlet-state (S(1)) geometries, denoted S(1)(LE) and S(1)(CT), were observed computationally for the benzodiazaborolyl-ortho-carboranes, the population of which depended on their orientation (ψ). TD-DFT calculations on these excited state geometries were in accord with their CT and LE emissions. These C-diazaborolyl-ortho-carboranes were viewed as donor-acceptor systems with the diazaborolyl group as the donor and the ortho-carboranyl group as the acceptor.     

Langmuir-Blodgett films of fluorinated glycolipids and polymerizable lipids and their phase separating behavior

This paper describes the phase separating behavior of Langmuir monolayers from mixtures of different lipids that (i) either carry already a glycopeptide recognition site or can be easily modified to carry one and (ii) polymerizable lipids. To ensure demixing during compression, we used fluorinated lipids for the biological headgroups and hydrocarbon based lipids as polymerizable lipids. As a representative for a lipid monomer, which can be polymerized in the hydrophilic headgroup, a methacrylic monomer was used. As a monomer, which can be polymerized in the hydrophobic tail, a lipid with a diacetylene unit was used (pentacosadiynoic acid, PDA). The fluorinated lipids were on the one hand a perfluorinated lipid with three chains and on the other hand a partially fluorinated lipid with a T(N)-antigen headgroup. The macroscopic phase separation was observed by Brewster angle microscopy, whereas the phase separation on the nanoscale level was observed by atomic force microscopy. It turned out that all lipid mixtures showed (at least) a partial miscibility of the hydrocarbon compounds in the fluorinated compounds. This is positive for pattern formation, as it allows the formation of small demixed 2D patterned structures during crystallization from the homogeneous phase. For miscibility especially a liquid analogue phase proved to be advantageous. As lipid 3 with three fluorinated lipid chains (very stable monolayer) is miscible with the polymerizable lipids 1 and 2, it was mostly used for further investigations. For all three lipid mixtures, a phase separation on both the micrometer and the nanometer level was observed. The size of the crystalline domains could be controlled not only by varying the surface pressure but also by varying the molar composition of the mixtures. Furthermore, we showed that the binary mixture can be stabilized via UV polymerization. After polymerization and subsequent expansion of the barriers, the locked-in polymerized structures are stable even at low surface pressures (10 mN/m), where the unpolymerized mixture did not show any segregation.     

Synthesis and structures of gold(I) phosphine complexes containing monoanionic selenocarbamate ester ligands

A series of mono- and dinuclear gold(I) phosphine complexes of the type [Au{SeC(OMe)NPh}(P)] [P = PPh₃, PTA, P(o-tolyl)₃, P(p-MeOC₆H₄)₃] and [Au₂{SeC(OMe)NPh}₂(μ-PP)] (PP = dppm, dppe, dppp, dppf, dppee) were prepared from the reaction of the appropriate chlorogold(I) phosphine complexes with N-phenyl-O-methylselenocarbamide in the presence of base. These new complexes were fully characterised by spectroscopic techniques and, in several cases, by X-ray crystallography. The differences in the solid-state structures of these selenium complexes were compared with those of some sulfur analogues.     

Synthesis and conformational analysis of glycomimetic analogs of thiochitobiose

The synthesis of six analogs of N,N′-diacetylchitobiose is reported, including a novel transglycosylation reaction for the preparation of S-aryl thioglycosides. The conformations of the compounds were studied by a combination of NMR spectroscopy and molecular modeling, using force field calculations. In the case of the S-aryl thioglycosides with exclusively S-glycosidic linkages, dihedral angles of the disaccharidic S-glycosidic bonds, Φ′ and Ψ′ and of the S-arylglycoside bonds, Φ and Ψ, were found to be similar, whereas they were different in mixed glycosides and in a thiazoline derivative. An adequate correlation between the calculated H,H-distances of the local minima and the measured NOE contacts was achieved by applying population-weighted averages over participating conformers based on weighted relative energies.