Structures, electronic properties and solid state luminescence of Cu(I) iodide complexes with 2,9-dimethyl-1,10-phenanthroline and aliphatic aminomethylphosphines or triphenylphosphine

The luminescent complexes of triphenylphosphine and two interesting aminomethylphosphines: P(CH(2)N(CH(2)CH(2))(2)NCH(3))(3) and P(CH(2)N(CH(2)CH(2))(2)O)(3) with copper(I) iodide and 2,9-dimethyl-1,10-phenanthroline (dmp): [CuI(dmp)PPh(3)], [CuI(dmp)P(CH(2)N(CH(2)CH(2))(2)NCH(3))(3)] and [CuI(phen)P(CH(2)N(CH(2)CH(2))(2)O)(3)] are presented in this work. These complexes were characterized in solution by means of NMR spectroscopy and their structures were crystallographically determined in the solid state. All complexes crystallize as the discrete dimers bound by π-stacking interactions between dmp rings. The coordination geometry about the Cu(I) centre is pseudo-tetrahedral showing small flattening and large rocking distortions. The investigated compounds exhibit intense orange photoluminescence in the solid state (emission peaks at r.t.: λ(max) = 588-592 nm; τ = 1.7-2.2 and 6.4-10.0 μs; at 77 K: λ(max) = 605-612 nm; τ = 4.8-6.5 and 32-47 μs), which is several orders higher than the luminescence of the analogous complexes with 1,10-phenanthroline (phen). Electronic and structural properties of the [CuI(dmp/phen)PR(3)] complexes were characterized using DFT methods to interpret their photophysics. On the basis of TDDFT calculations the broad CT bands observed in UV-Vis spectra are interpreted as the two mixed transitions from σ(CuI) bond with a small admixture of σ(CuP) bond to π* phen or dmp ligand: (MX,MPR(3))LCT, while the emissions most probably occur from two triplet states which are in thermal equilibrium.     

Efficient plasmid DNA cleavage by copper(II) complexes of 1,4,7-triazacyclononane ligands featuring xylyl-linked guanidinium groups

Three new metal-coordinating ligands, L(1), L(2), and L(3), have been prepared by appending o-, m-, and p-xylylguanidine pendants, respectively, to one of the nitrogen atoms of 1,4,7-triazacyclononane (tacn). The copper(II) complexes of these ligands are able to accelerate cleavage of the P-O bonds within the model phosphodiesters bis(p-nitrophenyl)phosphate (BNPP) and [2-(hydroxypropyl)-p-nitrophenyl]phosphate (HPNPP), as well as supercoiled pBR 322 plasmid DNA. Their reactivity toward BNPP and HPNPP is not significantly different from that of the nonguanidinylated analogues, [Cu(tacn)(OH(2))(2)](2+) and [Cu(1-benzyl-tacn)(OH(2))(2)](2+), but they cleave plasmid DNA at considerably faster rates than either of these two complexes. The complex of L(1), [Cu(L(1)H(+))(OH(2))(2)](3+), is the most active of the series, cleaving the supercoiled plasmid DNA (form I) to the relaxed circular form (form II) with a k(obs) value of (2.7 ± 0.3) × 10(-4) s(-1), which corresponds to a rate enhancement of 22- and 12-fold compared to those of [Cu(tacn)(OH(2))(2)](2+) and [Cu(1-benzyl-tacn)(OH(2))(2)](2+), respectively. Because of the relatively fast rate of plasmid DNA cleavage, an observed rate constant of (1.2 ± 0.5) × 10(-5) s(-1) for cleavage of form II DNA to form III was also able to be determined. The X-ray crystal structures of the copper(II) complexes of L(1) and L(3) show that the distorted square-pyramidal copper(II) coordination sphere is occupied by three nitrogen atoms from the tacn ring and two chloride ions. In both complexes, the protonated guanidinium pendants extend away from the metal and form hydrogen bonds with solvent molecules and counterions present in the crystal lattice. In the complex of L(1), the distance between the guanidinium group and the copper(II) center is similar to that separating the adjacent phosphodiester groups in DNA (ca. 6 ?). The overall geometry of the complex is also such that if the guanidinium group were to form charge-assisted hydrogen-bonding interactions with a phosphodiester group, a metal-bound hydroxide would be well-positioned to affect the nucleophilic attack on the neighboring phosphodiester linkage. The enhanced reactivity of the complex of L(1) at neutral pH appears to also be, in part, due to the relatively low pK(a) of 6.4 for one of the coordinated water molecules.     

Bioactive isocoumarins from a terrestrial Streptomyces sp. ANK302

Four isocoumarins have been isolated from the terrestrial Streptomyces sp. ANK302, namely 6,8-dimethoxy-3-methylisocoumarin (1), 6,8-dihydroxy-3-methylisocoumarin (2), 6,8-dihydroxy-7-methoxy-3-methylisocoumarin (3), and 6,7,8-trimethoxy-3-methylisocoumarin (4). Compound 1 is a new naturally-occurring isocoumarin, and 2 was isolated as a new bacterial product. The structures 1-4 were deduced from high resolution mass, 1D and 2D NMR spectra and by comparison with related compounds from the literature. Compound 2 showed a strong zoosporicidal activity at a concentration of 5 microg/mL against a phytopathogenic oomycete, Plasmopara viticola, and 1 was active against     

Dependence of enantioselectivity on the ligand/metal ratio in the asymmetric Michael addition of indole to benzylidene malonates: electronic influence of substrates

Simple bis(oxazoline) ligands, especially azabis(oxazolines), can promote the copper(II)-catalyzed Michael addition of indoles to benzylidene malonates with up to >99 % ee (ee=enantiomeric excess), provided that the ligand/metal ratio is tuned meticulously with particular regard to the electronic properties of the substrate. Despite a common paradigm followed in many asymmetric catalyses, an excess of chiral ligand is not always beneficial. In fact any excess of ligand has to be avoided to reach excellent enantioselectivities when electron-rich benzylidene malonates are used. On the contrary, malonates carrying an electron-withdrawing group require an excess of ligand for an optimum ee value. A correlation of optical yields versus the sigma(I) values of several para substituents shows a sigmoid trajectory. In the presence of an additive, such as triflate, the significance of the ligand/metal ratio vanishes and very good enantioselectivities are achieved at any rate--no matter whether electron-donating or withdrawing substituents are present.     

Komplexe der Alkalimetalltetraphenylborate mit makrocyclischen Kronenethern

Complexes of the Alkali Metal Tetraphenylborates with Macrocyclic Crown Ethers Alkali metal tetraphenylborates, MB(C₆H₅)₄ (M = Li to Cs), react in tetrahydrofuran with macrocyclic crown ethers to give complexes of the general formula MB(C₆H₅)₄(crown)_m(THF)_n. Suitable single crystals for X‐ray structure analysis were grown from a solvent mixture of tetrahydrofuran and n‐hexane. The salt like complexes [Li(12‐crown‐4)(thf)][B(C₆H₅)₄] ( 1 ), [Na(15‐crown‐5)(thf)][B(C₆H₅)₄] ( 2 ), and [Cs(18‐crown‐6)₂][B(C₆H₅)₄] · THF ( 6 ), the mononuclear molecular complexes [KB(C₆H₅)₄(18‐crown‐6)(thf)] ( 3 ), [RbB(C₆H₅)₄(18‐crown‐6)] ( 4 ), and [CsB(C₆H₅)₄(18‐crown‐6)] · THF ( 5 ), and the compound [CsB(C₆H₅)₄(18‐crown‐6)]₂[Cs(18‐crown‐6)₂][B(C₆H₅)₄] ( 7 ), which contains a binuclear molecule ([CsB(C₆H₅)₄(18‐crown‐6)]₂) beside a [Cs(18‐crown‐6)₂]⁺ cation and a [B(C₆H₅)₄]^? anion, are described. All compounds are charactarized by infrared spectra, elemental analysis, NMR‐spectroscopy, and X‐ray single crystal structure analysis.     

Strukturen von polaren Magnesiumorganylen: Synthese und Struktur von Basen‐Addukten des Bis(cyclopentadienyl)magnesiums

Structures of Polar Magnesium Organyls: Synthesis and Structure of Base Adducts of Bis(cyclopentadienyl)magnesium Eight donor‐acceptor complexes of bis(cyclopentadienyl)magnesium ( 1 ) with N‐ and O‐donor Lewis bases have been synthesized and characterized by X‐ray structure analysis. With acetonitrile, dimethoxyethane, diethyleneglycoldimethylether, dioxane, and tetramethylethylenediamine simple 1:1 adducts are formed ( 2 – 6 ). In some cases a change of the hapticity of one cyclopentadienylring from η⁵ to η² or η¹ is observed ( 4 – 6 ). In the adduct with pentamethyldiethylenetriamine ( 7 ) one C₅H₅‐ring is removed from the magnesium atom forming the cation [Mg(C₅H₅)(PMDTA)]⁺ and an uncoordinated five‐ring anion. With the crown ether 15‐crown‐5 the two ionic Mg compounds 8 and 9 are formed which have a [Mg(15‐crown‐5)L₂]²⁺‐cation [L = pyridine, THF] and two uncoordinated cyclopentadienyl anions. Cyclopentadienyl‐methyl‐magnesium reacts with 15‐crown‐5 to the salt [Mg(CH₃)(15‐crown‐5)]⁺ C₅H₅^? ( 10 ) which has also a free cyclopentadienyl anion.     

Pb(18‐crown‐6)Cl2 and Hg(18‐crown‐6)I2: Molecular Dihalides Trapped in a Crown Ether

Pb(18‐crown‐6)Cl₂ and Hg(18‐crown‐6)I₂ are obtained as transparent colourless crystals of needle and hexagonal shape, respectively, by isothermal evaporation of their dichloromethane solutions. Pb(18‐crown‐6)Cl₂ crystallizes with the trigonal crystal system [ , no. 148, a = b = 1176.3(2), c = 1191.8(3) pm, V = 1428.2(5) 10⁶·pm³, Z = 3] whereas Hg(18‐crown‐6)I₂ crystallizes with the orthorhombic crystal system (Pnma, no. 62, a = 1613.9(2) pm, b = 2822.2(5) pm, c = 841.3(1) pm, V = 3832(1)10⁶·pm³, Z = 8). Both compounds are characterized by linear MX₂ (HgI₂ or PbCl₂) molecular units which are encrypted by the crown ether. In both cases, the divalent metal ion resides in the middle of the crown ether resulting in a hexagonal bipyramidal coordination environment for the metal cations. The molecular symmetry comes close to D_3d. Hg(18‐crown‐6)I₂ and Pb(18‐crown‐6)Cl₂ differ in the way the single MX₂@18‐crown‐6 units are packed. Whereas the Hg(18‐crown‐6)I₂ molecules are arranged in a (distorted) cubic closest packing, the Pb(18‐crown‐6)Cl₂ molecules adopt a hexagonal closest packing.     

A polymer inclusion membrane based on the ionic liquid trihexyl(tetradecyl)phosphonium chloride and PVC for solid–liquid extraction of Zn(II) from hydrochloric acid solution

Abstract  

Extraction of Zn(II) from aqueous solution using polymer inclusion membranes based on poly(vinyl chloride) containing the phosphonium-based ionic liquid trihexyl(tetradecyl)phosphonium chloride (Cyphos^? IL 101) is described. Zn(II) could efficiently be extracted from 5 M hydrochloric acid solution with membranes containing 30 wt% Cyphos IL 101, whereas back-extraction was successfully achieved with 1 M sulfuric acid. Prepared membranes were evaluated in terms of stability in air as well as in terms of leaching of the ionic liquid from the membranes in aqueous solution.