Radiochemical separation of bismuth activities using Dalzin,and its application to geological problems

A radiochemical method has been devised for the separation of bismuth activities of the natural series,viz.²¹⁴Bi,²¹⁰Bi and²¹²Bi, and applied to the indirect estimation of their corresponding precursors,²²²Rn,²¹⁰Pb and²¹²Pb, in a wide variety of geological materials. The method consists of the solvent extraction of bismuth in radiochemically pure form from the sample solution atpH 2 with diallyldithiocarbamido-hydrazine (Dalzin) in chloroform, and back extraction with 2M acid. The advantages of this method over the dithizone extraction system are discussed.     

Precipitation from homogeneous solution by photochemical action: determination of thorium

Thorium was precipitated from homogeneous solution by photochemical reduction of periodate to iodate in a solution containing thorium and perchloric acid, by means of a 2537 A low-pressure mercury vapour lamp. For weighing, the precipitate was redissolved, precipitated once as thorium hydroxide, and finally as thorium oxalate, which was ignited to thorium dioxide. Quantitative results were obtained in the range 35-180 mg of thorium.     

Interaction of acridine orange monohydrochloride dye with sodiumdodecylsulfate, (SDS) cetyltrimethylammoniumbromide (CTAB) and p-tert-octylphenoxypolyoxy ethanol (Triton X 100) surfactants

Summary Results of spectrophotometric, conductometric and dialysis studies on the interaction of acridine orange monohydrochloride dye with sodiumdodecylsulfate (anionic), cetyltrimethylammoniumbromide (cationic) and Triton X 100 (nonionic) surfactants have been reported. The anionic surfactant, SDS has been observed to undergo both electrostatic and hydrophobic interactions with the dye cation. Aggregation of the dye molecules can be destroyed when the surfactant is in large excess, whereas, excess dye can check micellization of SD S. At a ratio of AO:SDS=1:7 and above, dye embedded mixed micelles are formed. These remain in a separate phase, probably as coacervates. At lower ratios than 1:7, aggregation of dye molecules is induced, which being complexed with SDS become stabilized as colloids. The colloid and the coacervate have been observed to be thermally stable, negatively charged materials that can be broken by salts, and cations of higher valency are more effective in this regard. An 1:3 = AO:SDS colloid has beeen found to be sufficiently large like the coacervates to pass through a membrane having cut off permeability for molecular weights 12,000 and above. All the above features of AO-SDS interaction have been observed to be absent for AO-CTAB and AO-TX 100 systems, Even hydrophobic interaction has played an insignificant role in these cases. Thus, the dye cation, the cationic and the nonionic surfactants have almost retained their self physicochemical identities in solution in the presence of each other. Electrostatic interaction is thus the primary requirement for acridine orange-surfactant (anionic) system; the hydrophobic effect is secondary and may become co-operative.With 9 figures and 2 tables     

Studies on ion association. Calorimetric study of the formation of monoazido complexes of Ni(II), Zn(II) and Cd(II)

From rehydration experiments the hydrates Ba(OH)₂ · 8 H₂O, Ba(OH)₂ · 3 H₂O β-Ba(OH)₂, · 1 H₂O, and γ-Ba(OH)₂ · 1 H₂O have been found in the system Ba(OH)₂-H₂O. Thermoanalytical measurements (DTA, TG, DTG, high temperature X-ray diffraction, high temperature Raman scattering) on these hydrates are reported. Thermal decomposition of Ba(OH)₂ · 8 H₂O and Ba(OH)₂ · 3 H₂O always results in the formation of β-Ba(OH)₂ · 1 H₂O, the stable form of the monohydrates at ambient temperature. Dehydration of β- and γ-Ba(OH)₂ · 1 H₂O, both of which form anhydrous β-Ba(OH)₂ as the first product of decomposition, starts at 105 and 115°C, respectively. Single crystals of Ba(OH)₂ · 3 H₂O and γ-Ba(OH)₂ · 1 H₂O were prepared from Ba(OH)₂ · 8 H₂O meltings and from ethanolic solutions of Ba(OH)₂ , respectively. The crystal data are: Ba(OH)₂ · 3 H₂O (orthorhombic, Pnma): a = 764.0(2), b = 1140,3(5), c = 596.5(1) pm, Z = 4; γ-Ba(OH)₂ · 1 H₂O (monoclinic, P2₁/m or P2₁): a = 704.9(2), b = 418.4(1), c = 633.3(1) pm, β = 111.45(2)°, Z = 2.     

Kinetics of oxidation of some disaccharides in ammoniacal medium

Kinetics of oxidation of lactose, maltose, cellobiose and melibiose has been studied by hexacyanoferrate(III) in the presence of ammonia. A general mechanism involving the formation of intermediate enodiol anion has been suggested. The effects of dielectric constant and salts have been studied in detail. The oxidation products have been characterised by descending paper chromatography. Compensation effects have been observed.     

The determination of molybdenum and tungsten in sea and surface water

A simple method for the determination of molybdenum and tungsten in sea and surface water is presented. Molybdenum and tungsten are concentrated on activated charcoal by adsorption as the ammonium pyrrolidine dithiocarbamate complex; the optimal pH for adsorption is 1.3. Mo and W are then determined by thermal neutron activation, forming ⁹⁹Mo (T_{$\text{1}\text{2}$} = 66.7 h) and ¹³⁷W (T_{$\text{1}\text{2}$} = 23.8 h), respectively. The ^99mTc daughter of ⁹⁹Mo is measured as soon as the equilibrium between ^99mTc(T_{$\text{1}\text{2}$}= 6 h) and ⁹⁹Mo is established. The detection limits are 0.05 μg Mo l^-1 and 0.05 μg W l^-1 (or 0.001 μg W l^-1 after a simple chemical separation).     

A carbazole-based polymeric azodye

A new polymeric azodye has been synthesized from carbazole by diazotization of its derivative N-methylcarbazole-3,6-diamine and subsequent coupling reaction with 2,2-bis(4-hydroxyphenyl-3-sulfonate-Na)-propane prepared from bisphenol-A. Its physico-chemical, electrical, and thermal properties have been characterized; finally, its application to the preparation of colored semiconductive films from polyvinyl alcohol has been studied.     

The N1s ESCA Spectrum of Protonated 1,8-Bis-(Dimethylamino) Naphthalene (“proton sponge”)

The ESCA spectrum of protonated 1,8-bis-(dimethylamino) naphthalene (“proton sponge”) (I) has been recorded in the region of N1s binding energies. The results indicate that IH⁺ possesses an unsymmetrical N? H…?N hydrogen bridge.     

Formatation of pore structure in tape-cast alumina membranes – effects of binder content and firing temperature

Disc type ceramic aluminium oxide membrane has been prepared by tape casting technique. Thickness of this single layer membrane is in the range 200–300 μm. Porosity and pore size distribution have been determined by mercury porosimetry. Polymeric binder content of the green tape and the firing temperature are found to have strong influence on the average pore size, pore size distribution and overall porosity. Higher binder content promotes agglomeration of the ceramic particles, which on firing leads to wider pore size distribution and formation of closed pores. Pore coarsening is observed with increasing firing temperature.     

PHOTODYNAMIC DAMAGE AND ITS REPAIR IN Vibrio cholerae

Abstract— Repair of photodynamic damage induced by acriflavine and visible light has been examined in three strains of Vibrio cholerae differing in their capabilities to repair ultraviolet (UV) light induced DN A damage. Excision repair deficient wild type cells of strain 154 are more sensitive to photodynamic treatment compared to repair proficient cells of strain 569B. However, no difference in their capabilities to repair of damage following photodynamic treatment can be detected. No single-strand breaks in the irradiated cell DNA are observed when the cell survival is more than 10%. Single-strand breaks observed at cell survival less than 5% are not dark repairable even in excision repair proficient wild type cells. Repair of membrane damage can partially account for the recovery observed at low doses. In contrast, radiation-sensitive mutant 569B_s cells which lack both excision and medium-dependent dark repair for UV-lesions are most efficient in repairing damage induced by photodynamic treatment.