222Rn measurements in drinking water and annual effective dose for the adult population around a coal-based and atomic power plant in Uttar Pradesh,India

Journal of Radioanalytical and Nuclear Chemistry - Dissolved radon (222Rn) in drinking water has been measured using SMART RnDuo, a continuous radon monitor. Water samples have been collected from...     

A Facile Method for Detection and Speciation of Inorganic Selenium with Ion Chromatography

Chromatographia - In this work, we present a new method for the determination and speciation of selenium in water with ion chromatography (IC) using a conductometric detector. Chromatographic...     

Box–Behnken Design-Based Development and Validation of a Reverse-Phase HPLC Analytical Method for the Estimation of Paclitaxel in Cationic Liposomes

Chromatographia - Stability-indicating reverse-phase HPLC analytical method for the quantification of Paclitaxel (PTX) in the bulk and cationic liposomes was developed. The optimized method was...     

Anaerobic biological treatment of dye bearing water in anaerobic sequencing batch reactor: Performance and kinetics studies

Textile and dye industries are main sources of dye bearing effluent. In present studies the anaerobic biological degradation of Acid Red 3BN dye water (AR3BNDW) and mixed dye water (MDW) for reduction of color and COD were studied in sequential batch reactor (SBR). The sludge as sources of microorganism was arranged from maize processing bio methanation wastewater treatment plant, which was acclimatized for treatment of AR3BNDW and MDW. After the acclimatization, dyes degradation were studied in SBR At optimum operation condition of hydraulics retention time (HRT) = 2.5 d, and treatment time (t_R) = 16 h, AR3BNDW have gone maximum 87% color reduction of 500 mg/L dye, and 82.8% COD reduction of 380 mg/L COD. At same operating condition, 84.5% color reduction of 500 mg/L dye, and 79.42% COD reduction of 413 mg/L COD achieved for MDW. The second order Grau model was fitted well for COD and dye reductions. The kinetics parameter were evaluated for both the dye water.     

A detailed insight into the optimization of plate and frame heat exchanger design by comparing old and new generation metaheuristics algorithms

The voluminous utilization and application of plate and frame heat exchangers (PFHE) in many industries has accelerated the consumer and designer both to optimize exchanger total cost. Over the last few years, several old and new generation algorithms were employed and exploited to optimize PFHE cost. This study explores the application and performance of three new-generation algorithms Big Bang-Big Crunch (BBBC), Grey Wolf Optimizer (GWO), and Water Evaporation Optimization (WEO) in designing optimally PFHE. Besides, this study also compares the performance of three well-established old generations algorithms namely genetic algorithm (genetics and natural selection), particle swarm optimization (animals behaviour), and differential evolution (population-based) with the above three new algorithms in the optimization of PFHE.Seven design factors are chosen for PFHE optimization: exchanger length on hot and cold sides, height and thickness of fin, length of the fin-strip, fin frequency, and the number of hot side layers. The applicability of the suggested algorithms is assessed using a case study based on published research. Though DE performs the best in this study of design optimization concerning total cost and computational time, the three new-generation meta-heuristic algorithms BBBC, GWO, and WEO also provide the novel scope of application in heat exchanger design optimization and successfully finding the cost of the heat exchanger. According to this study, capital costs increase by 19.5% for BBBC, 24% for GWO, and 7.6% for GWO, but operational costs fall by 9.5% for BBBC and GWO when compared to the best performing algorithm (DE). On the other hand, WEO shows an increase of 32.6% in operational costs. Aside from that, a full analysis of the computing time for each algorithm is also provided. The DE has the quickest run time of 0.09 ?s, while the PSO takes the longest at 33.97 ?s. The rest of the algorithms have nearly identical values. As a result, a good comparison is established in this study, offering an excellent platform for designers and customers to make selections. Additionally, the three new generations algorithms mentioned here were not used earlier for optimization of PFHE and the comparative study illustrates that each of them possesses eat potential for cost optimization and also solving other complex problems.     

Comprehensive quantum chemical calculations and molecular docking analysis of uracil mustard by first principle

Uracil mustard belongs to the nitrogen mustard family and is primarily used in anticancer drugs. The research that follows, investigates many quantum chemical features such as the computation of global minimum energies with no negative wavenumber values using the Density Functional Theory (DFT) with Becke three functional and 6-311G (d, p)/6–311++G (d, p) basis sets. All the vibrational modes have been calibrated and justified in comparison to their experimental counterparts. Mustard's polarizability and hyperpolarizability components, Natural Bond Analysis (NBO), electronic properties, Fukui function analysis, various global parameters, Quantum Theory of Atoms In Molecule (QTAIM) analysis, ADMET analysis, and docking analysis have all been investigated using the same theory and basis sets, indicating its biochemical significance. The biological activity of the molecule is reported by using PASS software. The Full fitness score and binding affinity parameters are utilized to determine the binding strength with 6cq3 protein. The acidity of the title molecule is calculated in water solvent by polarizable continuum model (PCM) solvent effects (estimated in water). The HOMO, LUMO, and MESP plots are used to explore the nature of binding and surfaces. The Fukui functions are computed using Mulliken atomic charges for neutral atoms, cations, and anions. The Ultraviolet–visible (UV–vis) of the molecule is computed employing the TD-DFT method.     

The development of platinum-rhodium alloy coatings on SS304 using a pulse/direct electrodeposition technique and their application to antibacterial activity

The current research focused on the development of Platinum–Rhodium alloy coating (Pt– Rh) on SS304 and its applications in antibacterial studies. Electrodeposition is considered to be one of the most suitable methods because it enhances the therapeutic effects of noble metals (Pt–Rh alloy). The electrodeposited coating is an economical and time-saving alternative to existing coating methods. The newly developed Pt–Rh coating was investigated using a scanning electron microscope (SEM) and an atomic force microscope (AFM). Using the agar Petri plate and broth culture method, the antibacterial effect of the platinum-rhodium alloy was investigated against Gram-negative Escherichia coli and Gram-positive bacteria such as Staphylococcus saprophytes, Bacillus Subtilis, and Enterococcus faecalis. The Pt–Rh alloy coated samples obtained by Direct current (DC) and Pulse coating (PC 50% and PC 75%) were examined for antibacterial study. The PC 75% Pt–Rh alloy coating exhibits significant antibacterial activity, demonstrating a maximum zone of inhibition while leaving the rest of the coated samples by DC and PC 50% duty cycles. The study also found that when the concentration of Pt–Rh solution rises from 5 μL to 15 μL, so does the antibacterial activity. The findings of the study showed that electrodeposited platinum-rhodium alloy metal ions may be handy bacteriostatic in the coming years.     

Organotin (IV) complexes derived from tridentate Schiff base ligands: Synthesis,spectroscopic analysis,antimicrobial and antioxidant activity

Organotin complexes of Schiff bases (derived from the condensation of hydrazides with salicylaldehyde derivatives) were prepared and their characterization was done using several spectroscopic techniques like FTIR, NMR (¹H, ¹³C, and ¹¹⁹Sn) and mass spectrometry. The spectroscopic data of the ligands and their corresponding complexes revealed that the Schiff bases chelated to the tin metal in a tridentate manner through –ONO atoms (oxygen atom of the hydroxyl group of the salicylaldehydic derivatives, the nitrogen atom of azomethine group, and the oxygen atom of enolic group present in the carboxylic acid hydrazides). Around tin atom pentacoordinated geometry was exhibited. The synthesized ligands and their complexes have been assessed for their biological potency (antibacterial, antifungal and antioxidant using Ciprofloxacin, Fluconazole and Ascorbic acid as reference compounds) and few of the compounds showed optimistic activity. The ligands having electron withdrawing group attached showed greater antimicrobial activity as compared to the other ligands. The complexes showed the better activity than the ligands. The general trend followed by the complexes was diphenyl ?> ?dibutyl ?> ?dimethyl substituted complexes. Compound 11 was the most active against microbes. The antioxidant activity increased with electron donating group. The phenyl substituted complexes showed better activity as compared to the dibutyl and dimethyl substituted complexes. Compound 20 was the best antioxidant.     

Solid phase extraction studies on cellulose based chelating resin for separation,pre-concentration and estimation of Cu2+and Ni2+

Chelating resins based on biopolymers, specifically cellulose, offers a green analytical method for determination of metal ions at trace levels present in various samples. It offers a fast, accurate and simple method for separation and pre-concentration of metal ions at low concentrations, prior to their determination by instrumental method. Cellulose based chelating resin (CELL-GLY) has been synthesised by immobilising glycine on it. CELL-GLY was used for the determination of trace amounts of Cu²⁺ and Ni²⁺ from aqueous solutions before their determination by FAAS. The preparation of CELL-GLY involves simple steps, based on natural and easily available biopolymer cellulose, which makes its use as chelating resin is a green method. The Cu²⁺ and Ni²⁺ can be quantitatively recovered from the CELL-GLY in the pH range 4.8–6.9 and 6.9-7.8 respectively with a recovery of more than 95% for each of these metal ions. Recovery of these metal ions using CELL-GLY was quantitative up to 35 °C. The detection limits for copper and nickel by FAAS were 1.20 ppb and 1.40 ppb, respectively. The method was successfully employed for the determination of trace amounts of Cu²⁺ and Ni²⁺ in various samples.     

Multivariate statistical analysis approach to assess groundwater quality in two selected mandals of Vizianagaram district,Andhra Pradesh,India

Groundwater quality is the major concern all over the world. Natural processes and manmade activities are the prime reasons for the contamination of available water resources. It is crucial to assess the quality of groundwater in areas surrounded by various industries. The present study was carried out to assess the groundwater quality during pre-monsoon and post monsoon seasons of 2016, in two mandals of Vizianagaram district of Andhra Pradesh via multivariate statistical analysis and water quality index method. The present work gains importance in light of the construction of proposed international airport at Bhohapuram and the existence of various industries in Pusapatirega mandal. A total of thirty-seven villages, eighteen from Bhogapuram mandal and seventeen from Pusapatirega mandal were selected for the present study. Factor analysis, linear regression analysis, correlation matrix analysis and cluster analysis tools were used to emphasize the parameters influencing quality of water in the chosen study area. From the analysis reports, it was found that the groundwater of the two mandals under investigation was strongly influenced by EC, TDS, total hardness(TH), Ca⁺², Mg⁺² and K⁺. During the two seasons under study, the water quality index value was found to be greater than 100 indicating that the water is unfit for human consumption. Concentration of Ca⁺², Mg⁺² and K⁺ were found to be beyond the permissible limits prescribed by BIS (2012). Dissolution of calcium and magnesium bearing minerals, mixing of industrial and household wastes may be the reasons for elevated concentration levels of these parameters.