Electronic, cyclic voltammetry, IR and EPR spectral studies of copper(II) complexes with 12-membered N4, N2O2 and N2S2 donor macrocyclic ligands

A new series of copper(II) complexes have been synthesized with macrocyclic ligands having three different donating atoms in the macrocyclic ring. It has been shown that the stereochemistry of complexes is dependent on the coordinated anions. These complexes are characterized by various physicochemical techniques, viz. elemental analysis, molar conductance, magnetic susceptibility measurements, IR, electronic, 1H NMR and EPR spectral studies. Cyclic voltammetric behavior of the complexes has also been discussed. The observed anisotropic g-values indicate that the chloro and acetato complexes are six-coordinate tetragonal. Whereas the sulfato and nitrato complexes are found to have five-coordinate square-pyramidal and four-coordinate square-planar geometry, respectively.     

Mesoporous material as catalyst for the production of fine chemical: Synthesis of dimethyl phthalate assisted by hydrophobic nature MCM-41

Aluminum, iron and zinc containing MCM-41 molecular sieves were prepared by the hydrothermal method. The catalyst was characterized by the XRD, BET (surface area), FT–IR and ²⁹Si, ²⁷Al MAS–NMR techniques. The catalytic activity of these molecular sieves was tested with esterification reaction used with phthalic anhydride (PAH) and methanol (MeOH) in the autoclave at 135 °C, 150 °C and 175 °C. Conversion increases with an increase in temperature and mole ratio. The activity of these catalysts followed the order: Al-MCM-41 (112) > Fe-MCM-41 (115) > Al-MCM-41 (70) > Al-MCM-41 (52) > Fe-MCM-41 (61) > Al, Zn-MCM-41 (104) > Al-MCM-41 (30). The reaction yielded both monomethyl phthalate (MMP) and dimethyl phthalate (DMP). The nature of the catalyst sites has been proposed using with water as an impurity. The selectivity of the dimethyl phthalate increases with increase in temperature and mole ratio. The weight of the catalyst was optimized at 0.07 g. The hydrophilic and hydrophobic nature of the catalyst has been explained by the influence of water and the external surface acidity also facilitates the reaction and this has been confirmed by the supporting reaction.     

Removal of actinides and fission products activity from intermediate alkaline waste using inorganic exchangers

Hydrated iron oxide or amorphous-Fe₂O₃·3.5 H₂O (HFeO), hydrated titanium oxide (HTiO) and hydrated thorium oxide (HThO) were synthesized and their applicability for the decontamination of intermediate level liquid wastes (ILLW) was tested. The sorption of a few actinides like plutonium and americium on HFeO, ¹³⁷Cs and ¹⁰⁶Ru on HTiO and ⁹⁰Sr on HThO was investigated as a function of pH, time and loading capacity of the hydrous oxide with metal ions. The influence of the total dissolved salt content was also monitored. Some of these parameters influenced the sorption behavior significantly. The radiation stability of these inorganic sorbents were studied by irradiating them up to 48 Mrad. Adsorbed actinides and fission products were successfully eluted from HFeO and from the mix-bed of HTiO and HThO by 0.5M nitric acid.The authors wish to thank Shri R. D. Changarani, Chief Superintendent NRG Facilities and Shri P. K. Dey, Head FRD for their valuable advice and constant support.     

Facile and Sensitive Spectrophotometric Determination of Propoxur in Formulations and Environmental Samples

A facile, rapid, and sensitive spectrophotometric method for the determination of propoxur in insecticidal formulations, fortified water, vegetables, agricultural wastewater, and agricultural soil samples has been elaborated. The proposed method is based on the hydrolysis of propoxur under basic conditions, followed by instantaneous azo coupling of the resulting 2‐isopropoxyphenol with the anilines 2a – c . This yielded the orange‐red chromophore 3a (λ_max=at 470 nm), the pale‐red coupling product 3b (490 nm), or the red derivative 3c (478 nm), which are stable for 46 h, 38 h, and 24 h, respectively, and could be readily analyzed spectrophotometrically.     

Mass, EPR, IR and electronic spectroscopic studies on newly synthesized macrocyclic ligand and its transition metal complexes

Manganese(II), cobalt(II), nickel(II) and copper(II) complexes have been synthesized with a new tetradentate ligand viz. 1,3,7,9-tetraaza-2,4,8,10-tetraketo-6,12-diphenyl-cyclododecane (L) and characterized by the elemental analysis, molar conductance measurements, magnetic susceptibility measurements, mass, ¹H NMR, IR, electronic and EPR spectral studies. The molar conductance measurements of the complexes in DMF correspond to be nonelectrolytic nature for Mn(II), Co(II) and Cu(II) while 1:2 electrolytes for Ni(II) complexes. Thus, these complexes may be formulated as [M(L)X₂] and [Ni(L)]X₂ (where M = Mn(II), Co(II) and Cu(II) and X = Cl⁻ and NO₃⁻).On the basis of IR, electronic and EPR spectral studies an octahedral geometry has been assigned for Mn(II) and Co(II) complexes, square-planar for Ni(II) whereas tetragonal for Cu(II) complexes. The ligand and its complexes were also evaluated against the growth of bacteria and pathogenic fungi in vitro.     

New iron(III) complexes with thiosemicarbazones derived from 5-methyl-3-formylpyrazole

New iron(III) complexes of 5-methyl-3-formylpyrazole thiosemicarbazone (HMPzTS) and 5-methyl-3-formylpyrazole-4-phenylthiosemicarbazone (HMPzPTS), namely [Fe(MPzTS)₂]X and [Fe(MPzPTS)₂]X respectively, where X=Cl, NO₃, SCN and ClO₄, have been synthesised and physico-chemically characterised by magnetic measurements (polycrystalline state), electronic, i.r., e.s.r. and Mössbauer spectra. All are cationic complexes containing two monoprotonic tridentate ligands with NNS donor sites and an anionic counterpart; they behave as 1:1 electrolytes in MeOH/DMF. Coordination to central iron(III) via the pyrazolyl nitrogen (²N), the azomethine nitrogen and the thiolato sulphur atom is confirmed in the complexes from i.r. data. E.s.r. data (RT & LNT) reveal the presence of a spin-paired iron(III) cation with d² _xyd² _yzd¹ _xy configuration. The ⁵⁷Fe Mössbauer spectral data (RT) are commensurate with the presence of two iron(III) spin states, the percentage of each being dependent upon the counterion of the species.     

Dilatometric studies of Purmandal clay: Part I

Clay from the Purmandal area of J&K State was separated into its different size fractions by the method of sedimentation and with Sharple's super centrifuge process. Dilatometric studies were performed on each clay fraction; the results obtained from the dilatation curves are discussed in detail. The results revealed that the finer fraction of clay is bentonitic in nature, whereas the other fractions are felsphatic and micaceous in nature.     

Studies with an inorganic ion-exchange membrane exhibiting selectivity for Pb(II) ions

A solid membrane electrode made with titanium arsenate as membrane material and "Araldite" as binder has been used to measure the activity of lead in the concentration range from 0.1 M to 5 x 10(-6)M. The electrode is unaffected by many cations, nitrate and acetate. The response time is 40-60 sec over the whole concentration range (in a static system) and the electrode has a working life of at least four months. The electrode can work in the pH range 2-5 and is tolerant of ethanol up to a content of 30% v v . It has been successfully used for end-point indication in potentiometric titration of lead. A membrane treated with cationic surfactant exhibits better selectivity.     

Synthesis and characterisation of some new cyanonitrosyl chromium(l) complexes with phenetidines and anisidines

Summary A new series of cyano-substituted nitrosylchromium(I) complexes having octahedral stereochemistry around the metal ion, and of general formula, [CrNO(CN)₂(L)₂(H₂O)] (L =o-,m- andp-phenetidines oro-,m-, andp-anisidines) have been isolated in the solid state by interaction of potassium pentacy-anonitrosylchromate(I) monohydrate with the appropriately substituted aniline. The complexes, which have been characterised by elemental analysis, conductance, molecular weight determination, magnetic measurements, e.s.r. and i.r. spectral studies, contain chromium(I) in a low-spin d⁵-configuration.     

Inorganic complexation of nickel and cobalt in natural waters

The distribution of nickel and cobalt species has been computed, based on the pH-dependent model of Zirino and Yamamoto. The media used in the pH range of 7 to 9 are natural waters like fresh water, sea water and a mixture of them at different compositions, at 25°C temperature and 1 atm pressure. In fresh water, both nickel and cobalt dominate as free cations at lower pH, and as carbonato complexes at higher pH. In sea water, chloro complexes are significant. In mixtures of the two kinds of water, as might be found in a totally mixed estuary, chloro complexes are important, varying slowly with pH. Sea water plays an important role in complexation. The present results are in excellent agreement with experimental data obtained by the resin exchange method.