Cems characterization of SnO2 films obtained by sputtering and sol-gel route

Conversion electron Mössbauer spectroscopy (CEMS) has been used to study tin oxide films prepared by sol-gel dipping and sputtering. The spectra of films prepared by sol-gel route result close to that of crystalline SnO₂ after heat treatment at a temperature as low as 150°C. The Mössbauer parameters of as sputter deposited films indicate that the structure of the deposited stannic oxide has an amorphous character more pronounced for thinner samples. The structure becomes predominantly that of crystalline SnO₂ by heating at 550°C for 30 min provided the film thickness is higher than 10 nm.     

Quantitative dependence of MR signal intensity on tissue concentration of Gd(HP-DO3A) in the nephrectomized rat.

Cardiac-gated SE 20/224 +/- 20 MR images were obtained from nephrectomized rats before and after intravenously administering 153Gd-Gd(HP-DO3A). The concentration of Gd, [Gd], was linear in dose in myocardium, skeletal muscle, and blood. Under steady-state conditions, where d[Gd]/dt = 0, image intensities (IIN) in regions of interest were compared with the measured [Gd]. IIN was linear in myocardium at less than or equal to 0.61 mumol/g-myocardium (less than or equal to 0.5 mmol/kg dose) and in skeletal muscle at less than or equal to 0.63 mumol/g-muscle (less than or equal to 0.75 mmol/kg). Above 0.6 mumol Gd/g-tissue, IIN did not increase further. The in vivo data were consistent with measured ex vivo and in vivo relaxivities. A 29% greater slope for IIN versus [Gd] in myocardium [14,439 +/- 4350 IIN (mumol/g)] than in muscle [10,258 +/- 5,296 IIN/(mumol/g)] was attributed to a significant difference in blood content: 25% versus 2% weight blood in myocardium and skeletal muscle, respectively. Two components were apparent from plots of ex vivo 1/T1 versus [Gd] in myocardium and muscle, and only one for blood.     

On composition of some general fractional integral operators

In the present paper we derive three interesting expressions for the composition of two most general fractional integral oprators whose kernels involve the product of a general class of polynomials and a multivariableH-function. By suitably specializing the coefficients and the parameters in these functions we can get a large number of (new and known) interesting expressions for the composition of fractional integral operators involving classical orthogonal polynomials and simpler special functions (involving one or more variables) which occur rather frequently in problems of mathematical physics. We have mentioned here two special cases of the first composition formula. The first involves product of a general class of polynomials and the Fox’sH-functions and is of interest in itself. The findings of Buschman [1] and Erdélyi [4] follow as simple special cases of this composition formula. The second special case involves product of the Jacobi polynomials, the Hermite polynomials and the product of two multivariableH-functions. The present study unifies and extends a large number of results lying scattered in the lierature. Its findings are general and deep.     

Vapour and plasma ignition thresholds for visible pulsed-laser ablation of metallic targets

The coupling of visible nanosecond laser pulses to metallic targets irradiated in vacuum is studied. The expressions of the vapour and plasma ignition times are obtained. Two cases for vapour breakdown in the plasma ignition process are considered. The first case is that 40 generations of new electrons are born in vapour generation time before plasma formation as assumed in the literature. The second case is that 10 generations of new electrons are born in vapour generation time. Molybdenum (Mo), niobium (Nb) and aluminium (Al) targets are considered for illustrations of our results. The expression of the plasma ignition time for the Al target is substantially different from that reported in the literature. The vapour and plasma ignition threshold laser intensities are calculated and compared with those reported in the literature. Reasons for disagreement are discussed. The plasma ignition threshold estimated in the second case is noted to be in good agreement with the reported experimental result.     

Simultaneous Approximation for Generalized Baskakov-Durrmeyer-Type Operators

The present paper deals with the study of a Durrmeyer-type integral modification of certain modified Baskakov operators. Here we study simultaneous approximation properties for these operators by using the iterative combinations. We obtain an asymptotic formula and an error estimation in terms of higher order modulus of continuity for these operators.      

Supersymmetry search via gauge boson fusion

We propose a novel method for the search of supersymmetry, especially for the electroweak gauginos at the large hadron collider (LHC). Gauge boson fusion technique was shown to be useful for heavy and intermediate mass Higgs bosons. In this article, we have shown that this method can also be applied to find the signals of EW gauginos in supersymmetric theories where the canonical search strategies for these particles fail.     

Design and operation characteristics of a high power transverse flow pulser sustained cw CO2 laser

A transverse flow, transverse discharge cw CO₂ laser in which de discharge is sustained by employing high repetition rate high voltage pulses has been developed. Pulser sustained discharge through electrodes of innovative design provided uniform excitation at electrical input power densities more than 10 W/cc. Laser output power more than 2.5 kW was obtained in a laser gas mixture consisting of 0.5 mbar of CO₂, 16 mbar of N₂ and 38.5 mbar of He. Design details and operational characteristics of this laser are presented.     

Conductivity and dielectric properties of sol–gel derived porous zirconia

The 8-mol percentage Y₂O₃-stabilized Porous Zirconia was prepared using sol–gel method. Zirconium oxalate gel was prepared by the addition of appropriate amount of oxalic acid solution into the 1 M aqueous solution of zirconium-oxy chloride. A cubic phase zirconia powder was obtained by calcination and milling of the zirconium oxalate gel. Crystallization temperature was found about 450 °C from the Differential thermal analysis. The phase analysis by X-ray diffraction shows the presence of cubic phase. Pellets sintered at 1,350 °C were highly porous, and the electrical conductivity was found with lower value due to the porosity, and the hardness was about 8.0 GPa. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006.     

Simultaneous approximation for the Bézier variant of Baskakov-Beta operators

In the present paper, we study the rate of convergence in simultaneous approximation for the Bézier variant of the Baskakov-Beta operators by using the decomposition technique of functions of bounded variation.     

HPTLC Determination of Swertiamarin and Amarogentin in Swertia Species from the Western Himalayas

JPC – Journal of Planar Chromatography – Modern TLC - A high-performance thin-layer chromatographic (HPTLC) method has been established for simple and rapid quantification of two...