XRD and RBS study of annealing effects in titanium implanted a-silicon films

We have used ion implantation of 30 keV⁴⁸Ti⁺ ions into a-Si films at nominal doses of 10²⁰-10²¹ ions/m² to fabricate coherent silicide layers. Characterization of these layers and study of their annealing behaviour were carried out using XRD and RBS techniques. We find that the layers are a mixture of Ti₅Si₄, TiSi, TiSi₂ and Si. On annealing at relatively lower temperatures (up to ～ 300° C), predominant silicide phases present in the layer are Ti-rich, such as Ti₅Si₄ and TiSi. At higher temperatures, the Ti-rich layer has a tendency to consume unreacted Si from the film and to form a predominantly Si-rich silicide layer. A structure of silicon different from the diamond cubic structure is noticed in these implanted layers.     

Bionomic exploitation of a ratio-dependent predator–prey system

The present article deals with the problem of combined harvesting of a Michaelis–Menten-type ratio-dependent predator–prey system. The problem of determining the optimal harvest policy is solved by invoking Pontryagin's Maximum Principle. Dynamic optimization of the harvest policy is studied by taking the combined harvest effort as a dynamic variable. Computer simulations are carried out to illustrate our analytical findings. Biological and bioeconomical interpretations of the results are explained critically.     

Study of Neutron-Rich Hypernuclei by the (π −, K +) Reaction at J-PARC

We are planning to perform an experiment at J-PARC and produce new neutron-rich Λ hypernuclei by using the (π ^?, K ⁺) reaction (J-PARC E10). As the first step, we are planning to produce ${^6_{\Lambda}{\rm H}}$ hypernuclei with a ⁶Li target. To conduct this experiment, we are developing new detectors, those are scintillating fiber tracker, and silicon strip detector, for high rate operation to aim at increasing beam intensity up to 10⁷/spill. As a result of beam test in Jun 2012, we are going to use high-rate beam at least 10⁷/spill.     

Intercepted-Knoevenagel condensation for the synthesis of unsymmetrical fused-tricyclic 4H-pyrans

4H-Pyrans (4H-Pys) and 1,4-dihydropyridines (1,4-DHPs) are important classes of heterocyclic scaffolds in medicinal chemistry. Herein, an indium(III)-catalyzed one-pot domino reaction for the synthesis of highly functionalized 4H-Pys, and a model of 1,4-DHP is reported. This alternative approach to the challenging Hantzsch 4-component reaction enables the synthesis of fused-tricyclic heterocycles, and the mechanistic studies underline the importance of an intercepted-Knoevenagel adduct to achieve higher chemoselectivity towards these types of unsymmetrical heterocycles.     

Superheavy nuclei and hypernuclei: extending the limits of the nuclear chart

In this study, a tubular radon removal device and a movable one were prepared and investigated. The tubular radon removal device in an air conditioning return air system reduced the radon progeny by more than 84%. The radon progeny concentration reached equilibrium after 4 h when it was used only for a ventilation at the rate of 10 h⁻¹. Radon progeny removal efficiency was above 95% for the movable radon removal device, when the ventilation rate was 17 h⁻¹. The results showed that the radon removal devices can effectively remove the radon progeny in the air.

     

Thermal behaviour and the cone calorimetric analysis of the jute fabric treated in different pH condition

In this paper, the effect of pH, i.e. acid and alkali was investigated on thermal stability of ligno-cellulosic polymeric fibrous (jute) material. The jute fabric was subjected to treatment under different pH, namely 4.5, 7, 10, 12, i.e. in acidic, neutral and alkaline conditions followed by drying prior to any thermal and physical characterization. The improvement in the thermal stability of jute to flame was measured in terms of limiting oxygen index value, vertical flammability and temperature profile of burning zone. Likewise thermo-gravimetry, differential scanning calorimetry and cone calorimeter analysis were also used to elucidate the improvement in thermal stability of the treated fabric. The changes in heat release rate, mass loss rate, heat of combustion, smoke production, etc., in the untreated and treated sample were measured in detail in cone calorimeter. Only the alkali-treated jute fabric samples showed profound improvement in thermal stability.

     

Efficient approximately 2 microm Tm3+ -doped tellurite fiber laser

Laser emission in the range of 1.88-1.99 micrim from a Tm3+ -doped tellurite fiber is demonstrated when pumped with a diode-pumped Er3+/Yb3+-doped silica fiber laser operating at 1.57-1.61 microm. This pump source excites the Tm3+ ions directly into the F43 upper laser level and yields an output power of 280 mW with a slope efficiency of 76% in a 99%-12% laser cavity arrangement and a 32 cm long fiber. This result is very close to the Stokes efficiency limit of approximately 80%. This is, to the authors' knowledge, the first demonstration of high efficiency lasing in a tellurite fiber at wavelengths longer than 1.56 microm.     

Tm(3+)/Ho(3+) codoped tellurite fiber laser

Continuous-wave and Q-switched lasing from a Tm(3+)/Ho(3+) codoped tellurite fiber is reported. An Yb(3+)/Er(3+)-doped silica fiber laser operating at 1.6 microm was used as an in-band pump source, exciting the Tm(3+) ions into the (3)F(4) level. Energy is then nonradiatively transferred to the upper laser level, the (5)I(7) state of Ho(3+). The laser transition is from the (5)I(7) level to the (5)I(8) level, and the resulting emission is at 2.1 microm. For continuous wave operation, the slope efficiency was 62% and the threshold 0.1 W; the maximum output demonstrated was 0.16 W. Mechanical Q switching resulted in a pulse of 0.65 microJ energy and 160 ns duration at a repetition rate of 19.4 kHz.     

Unveiling the binding interaction of zinc (II) complexes of homologous Schiff-base ligands on the surface of BSA protein: A combined experimental and theoretical approach

Four new zinc (II) complexes [Zn (HL¹H)Br₂] (1), [Zn (HL¹H)Cl₂] (2), [Zn₂(HL²)Br₃] (3), and [Zn (HL²)Cl] (4) have been synthesized by adopting template synthetic strategy and utilizing two homologous Schiff base ligands (H₂L¹ = 4-bromo-2-{[2-(2-hydroxyethylamino)-ethylimino]-methyl}-6-methoxyphenol, H₂L² = 4-bromo-2-{[3-(2-hydroxyethylamino)propylimino]methyl}-6-methoxyphenol), differing in one -CH₂- unit in the ligating backbone, by adopting template synthetic strategy. All the complexes have been characterized by single crystal X-ray diffraction analysis as well as by other routine physicochemical techniques. Ligand mediated structural variations have been observed and rationalized by density functional theoretical (DFT) calculations. Interaction of the complexes 1–4 with Bovine Serum Albumin protein (BSA) has been studied by different spectroscopic techniques. A complete thermodynamic profile (ΔH^o, ΔS^o and ΔG^o) was evaluated initially from the change in absorption and fluorescence spectra upon addition of BSA to the complexes. Appreciable binding constant values in the range ~ 0.94–4.51 × 10⁴ M⁻¹ indicate efficient binding tendency of the complexes to BSA with the sequence 1 ≅ 2 > 3 ≅ 4. Circular dichroism (CD), isothermal calorimetric titration experiments, molecular docking and molecular dynamics have been performed to gain deep insight into the binding regions of complex 1 to BSA. Experimental evidences suggest an interaction of zinc complexes at the surface of BSA protein and this particular binding has been exploited to determine unknown concentration of BSA protein. For this purpose complex 1 was explored as a BSA protein quantification tool.