N-Heteroaralkyl substituted α-amidinium thiolsulfates

The syntheses of a number of N-substituted α-amidinium thiolsulfates, CH₂(S₂O₃^?)-C(=NH₂⁺)NH(CH₂)nR are described, where n was varied from 1 to 3 and R represents such heteroaryl groups as 2-furyl, 2-thienyl, 3-indolyl and 2-, 3- and 4-pyridyl. The preparation of S-(2-imidazolinemethyl)thiolsulfuric acid, as an example of an N, N'-disubstituted α-amidinium thiolsulfate, is also reported.     

Biomimetic iron-catalyzed asymmetric epoxidation of aromatic alkenes by using hydrogen peroxide

A novel and general biomimetic non-heme Fe-catalyzed asymmetric epoxidation of aromatic alkenes by using hydrogen peroxide is reported herein. The catalyst consists of ferric chloride hexahydrate (FeCl(3)6 H(2)O), pyridine-2,6-dicarboxylic acid (H(2)(pydic)), and readily accessible chiral N-arenesulfonyl-N'-benzyl-substituted ethylenediamine ligands. The asymmetric epoxidation of styrenes with this system gave high conversions but poor enantiomeric excesses (ee), whereas larger alkenes gave high conversions and ee values. For the epoxidation of trans-stilbene (1 a), the ligands (S,S)-N-(4-toluenesulfonyl)-1,2-diphenylethylenediamine ((S,S)-4 a) and its N'-benzylated derivative ((S,S)-5 a) gave opposite enantiomers of trans-stilbene oxide, that is, (S,S)-2 a and (R,R)-2 a, respectively. The enantioselectivity of alkene epoxidation is controlled by steric and electronic factors, although steric effects are more dominant. Preliminary mechanistic studies suggest the in situ formation of several chiral Fe-complexes, such as [FeCl(L*)(2)(pydic)]HCl (L*=(S,S)-4 a or (S,S)-5 a in the catalyst mixture), which were identified by ESIMS. A UV/Vis study of the catalyst mixture, which consisted of FeCl(3)6 H(2)O, H(2)(pydic), and (S,S)-4 a, suggested the formation of a new species with an absorbance peak at lambda=465 nm upon treatment with hydrogen peroxide. With the aid of two independent spin traps, we could confirm by EPR spectroscopy that the reaction proceeds via radical intermediates. Kinetic studies with deuterated styrenes showed inverse secondary kinetic isotope effects, with values of k(H)/k(D)=0.93 for the beta carbon and k(H)/k(D)=0.97 for the alpha carbon, which suggested an unsymmetrical transition state with stepwise O transfer. Competitive epoxidation of para-substituted styrenes revealed a linear dual-parameter Hammett plot with a slope of 1.00. Under standard conditions, epoxidation of 1 a in the presence of ten equivalents of H(2) (18)O resulted in an absence of the isotopic label in (S,S)-2 a. A positive nonlinear effect was observed during the epoxidation of 1 a in the presence of (S,S)-5 a and (R,R)-5 a.     

Design,synthesis, characterization,photophysical and pH chemosensor studies of novel 2,4,6-trisubstituted pyridines

For the application in organic electronics as well as pH meters, a series of novel 2,4,6-trisubstituted pyridines have been synthesized by the reaction of substituted aromatic aldehydes and substituted 3-acetylcoumarin with ammonium acetate. The structures of all the new compounds were characterized by IR, NMR, and GC–MS analysis. The important photo physical prerequisites for organoelectronic such as optical absorption and thermal stability were determined for the synthesized molecules. Optical properties were studied by UV–visible absorption and fluorescence spectroscopy. Optical band gaps of the 2,4,6-trisubstituted pyridines were found to be around 3.01–3.06?eV as calculated from their onset absorption edge. The pH-dependent changes in the fluorescence intensity suggest that 2,4,6-trisubstituted pyridines are useful applicants in intracellular pH meters.     

Synthesis of a new chiral N,N,N-tridentate pyridinebisimidazoline ligand library and its application in Ru-catalyzed asymmetric epoxidation

A small ligand library of chiral tridentate N,N,N-pyridinebisimidazolines have been synthesized for the first time. This new class of ligands can be easily tuned and synthesized on multi g-scale. The usefulness of the ligands is shown in the ruthenium-catalyzed asymmetric epoxidation with hydrogen peroxide as oxidant. Excellent yields (>99%) and good enantioselectivities (up to 71% ee) have been obtained for the epoxidation of aromatic olefins. [reaction: see text]     

A novel catalyst-free mechanochemical protocol for the synthesis of 2,3-dihydro-1H-perimidines

A rapid, efficient, and green grinding assisted method for the synthesis of 2,3-dihydro-1H-perimidines has been developed. 1,8-Diaminonaphthalene and aldehydes were ground using mortar and pestle for 5 minutes affording the product in moderate to excellent yields. The methodology minimises the use of conventional workup and column chromatographic techniques.     

PEO|Sncl2|PANI composites: as an electrolyte in solid-state battery

Solid-state polymer electrolytes possess high conductivity and have advantages compared with their liquid counterparts. The polyethylene oxide (PEO)-based polymer is a good candidate for this purpose. The PEO/SnCl₂/polyaniline composite (PSP composites) at different weight percentages were prepared in anhydrous acetonitrile media. Structural studies were carried out of the prepared composites by X-ray diffraction, Fourier transmission infrared spectroscopy, and surface morphology by scanning electron microscopy. The σ _dc was carried out by a two-probe method, and it is found that the conductivity increases with an increase in temperature. The temperature-dependent conductivity of the composites exhibits a typical semi-conducting behavior and hence can be explained by the 1D variable range hopping model proposed by Mott. The electrochemical cell parameters for battery applications at room temperature have also been determined. The samples are fabricated for battery application in the configuration of Na: (PSP): (I₂?+?C?+?sample), and their experimental data are measured using Wagner’s polarization technique. The cell parameters result in an open-circuit voltage of 0.83 V and a short-circuit current of 912 μA for PSP (70:30:10) composite. Hence, these composites can be used in polymer electrolyte studies.     

Solar-driven electrochemically assisted semiconductor-catalyzed iodide ion oxidation. Enhanced efficiency by oxide mixtures

Oxidation of iodide ion from an air-saturated solution under natural sunlight (900±50 W m⁻²) on the surfaces of TiO₂, ZnO, Fe₂O₃, MoO₃ and CeO₂ enhances by 6 to 12-fold on application of a cathodic bias of −0.2 to −0.3 V (vs NHE) to the semiconductors; light, the semiconductor and dissolved oxygen are essential for iodine generation. The semiconductors under an anodic bias of +0.2 to +0.3 V (vs NHE) fail to oxidize iodide ion from air-saturated solution under sunlight. Under cathodic bias, semiconductor mixtures like TiO₂-ZnO, TiO₂-Fe₂O₃ and ZnO-Fe₂O₃ show enhanced photocatalytic activity, indicating improved charge separation in oxide mixtures. The mechanism of photocatalysis under cathodic bias is discussed.      

Kinetics of Ag/TiO2-photocatalyzed iodide ion oxidation

Abstract  

Ag-doped TiO₂ (anatase) samples (mass fraction w _Ag = 0.01 and w _Ag = 0.02) of 15.9 and 14.5 nm mean particle size and 11.46 and 10.14 m² g⁻¹ BET surface area were prepared by photodeposition. Doping results in surface plasmon resonance of the metallic silver nanoclusters at around 500 nm, but the absorption edge remains unaltered at 365 nm. Ag-doping remarkably enhances the photooxidation of iodide ion under UV light; iodine formation with Ag/TiO₂ with w _Ag = 0.01 is 16 times greater than with bare TiO₂. The reaction conforms to Langmuir–Hinshelwood kinetics with regard to both I⁻ and O₂. Increase of pH slows down iodine formation and sacrificial electron donors arrest the reaction. Pre-sonication of the catalyst slurry hinders the photocatalysis. Generation of iodine is much greater in acetonitrile than in water. Under the experimental conditions, Ag/TiO₂ with w _Ag = 0.01 is more efficient than Ag/TiO₂ with w _Ag = 0.02, and the enhanced photocatalysis is likely to be because of suppression of electron–hole pair recombination. Kinetic analysis reveals that increasing the Ag mass fraction from 0.01 to 0.02 enhances the surface pseudo-first-order rate constant but inhibits the adsorption of iodide ion and the oxygen molecule on the illuminated oxide surface.     

Concise and efficient synthesis of 3′-O-triphosphates of 2′-deoxyadenosine and 2′-deoxycytidine

We describe concise and efficient synthesis of 2′-deoxyadenosine-3′-O-triphosphate (2′-d-3′-ATP) and 2′-deoxycytidine-3′-O-triphosphate (2′-d-3′-CTP) which are well known for their various biological applications. One-pot synthetic methodology was used to convert N⁶-Benzoyl-5′-O-levulinoyl-2′-deoxyadenosine into N⁶-Benzoyl-5′-O-levulinoyl-2′-deoxyadenosine-3′-O-triphosphate in 72% yield. One-step concurrent deprotection of N⁶-Benzoyl and 5′-O-levulinoyl groups using concentrated aqueous ammonia resulted in 2′-d-3′-ATP in 75% yield. The same synthetic strategy was successfully employed to convert N⁴-Benzoyl-5′-O-levulinoyl-2′-deoxycytidine into 2′-d-3′-CTP in 66% yield.