Electronic, epr and magnetic studies of Co(II), Ni(II) and Cu(II) complexes with thiosemicarbazone (L1) and semicarbazone (L2) derived from pyrole-2-carboxyaldehyde

Co(II), Ni(II) and Cu(II) complexes are synthesized with thiosemicarbazone (L(1)) and semicarbazone (L(2)) derived from pyrole-2-carboxyaldehyde. These complexes are characterized by elemental analysis, molar conductance, magnetic susceptibility measurements, mass, IR, electronic and EPR spectral studies .The molar conductance measurements of the complexes in DMSO correspond to non-electrolytic nature except Co(L1)2(NO3)2 and Ni(L1)2(NO3)2 complexes which are 1:2 electrolytes. All the complexes are of high-spin type. On the basis of spectral studies an octahedral geometry may be assigned for Co(II) and Ni(II) complexes except Co(L1)2(NO3)2 and Ni(L1)2(NO3)2 which are of tetrahedral geometry. A tetragonal geometry may be suggested for Cu(II) complexes.     

Factors that regulate the conformation of m-benziporphodimethene complexes: agostic metal-arene interaction, hydrogen bonding, and η2,π coordination

Group 12 and silver(I) tetramethyl‐m‐benziporphodimethene (TMBPDM) complexes with phenyl, methylbenzoate, or nitrophenyl groups as meso substituents were synthesized and fully characterized. The dimeric silver(I) complex displays an unusual η²,π coordination from the β‐pyrrolic C?C bond to the silver ion. All of the complexes displayed a close contact between the metal ion and the inner C(22)? H(22) on the m‐phenylene ring. The downfield chemical shifts of H(22) and large coupling constants between Cd^II and H(22) strongly support the presence of an agostic interaction between the metal ion and inner C(22)–H(22). Crystal structures revealed that the syn form is the predominant conformation for TMBPDM complexes. This is distinctively different from the exclusive anti conformation observed in m‐benziporphyrin and tetraphenyl‐m‐benziporphodimethene (TPBPDM) complexes. Evidently, intramolecular hydrogen‐bonding interactions between axial chloride and methyl groups stabilize syn conformations. Unlike the merely syn conformation observed in the solid‐state structures of TMBPDM complexes that contain an axial chloride, in solution these complexes display highly solvent‐ and temperature‐dependent syn/anti ratio changes. The observation of dynamic ¹H NMR spectroscopic scrambling between syn and anti conformations from the titration of chloride ion into the solution of the TMBPDM complex suggests that axial ligand exchange is a likely pathway for the conversion between syn and anti forms. Theoretical calculations revealed that intermolecular hydrogen‐bonding interactions between the axial chloride and CHCl₃ stabilizes the anti conformation, which explains the increased ratio for the anti form when dichloromethane or chloroform was used as the solvent.     

Densities,Refractive Indices,Ultrasonic Speeds and Excess Properties of Acetonitrile + Poly(ethylene glycol) Binary Mixtures at Temperatures from 298.15 to 313.15 K

The densities, ρ, refractive indices, n _D, and ultrasonic speeds, u, of binary mixtures of acetonitrile (AN) with poly(ethylene glycol) 200 (PEG200), poly(ethylene glycol) 300 (PEG300) and poly(ethylene glycol) 400 (PEG400) were measured over the entire composition range at temperatures (298.15, 303.15, 308.15 and 313.15) K and at atmospheric pressure. From the experimental data, the excess molar volumes, \( V_{\text{m}}^{\text{E}} \) , deviations in refractive indices, \( \Delta n_{\text{D}} \) , excess molar isentropic compressibility, \( K_{{s , {\text{m}}}}^{\text{E}} \) , excess intermolecular free length, \( L_{\text{f}}^{\text{E}} \) , and excess acoustic impedance, Z ^E, have been evaluated. The partial molar volumes, \( \overline{V}_{\text{m,1}} \) and \( \overline{V}_{\text{m,2}} \) , partial molar isentropic compressibilities, \( \overline{K}_{{s , {\text{m,1}}}} \) and \( \overline{K}_{{s , {\text{m,2}}}} \) , and their excess values over whole composition range and at infinite dilution have also been calculated. The variations of these properties with composition and temperature are discussed in terms of intermolecular interactions in these mixtures. The results indicate the presence of specific interactions among the AN and PEG molecules, which follow the order PEG200 < PEG300 < PEG400.     

Cu‐Based Nanoparticles as Emerging Environmental Catalysts

This account provides an overview of current research activities on nanoparticles containing the earth‐abundant and inexpensive element copper (Cu) and Cu‐based nanoparticles, especially in the field of environmental catalysis. The different synthetic strategies with possible modification of the chemical/ physical properties of these nanoparticles using such strategies and/or conditions to improve catalytic activity are presented. The design and development of support and/or bimetallic systems (e. g., alloys, intermetallic, etc.) are also included. Herein, we report synthetic approaches of Cu and Cu‐based nanoparticles (monometallic copper, bimetallic copper and copper (II) oxide nanoparticles/nanostructures) and impregnation of such nanoparticles onto support material (e. g., Co₃O₄ nanostructure), along with their applications as environmental catalyst for various oxidation and reduction reactions. Finally, this account provides necessary advances and perspectives of Cu‐based nanoparticles in the environmental catalysis.     

Design,Synthesis, In Vitro Antimicrobial,Antioxidant Evaluation,and Molecular Docking Study of Novel Benzimidazole and Benzoxazole Derivatives

A series of novel 2‐substituted benzimidazole and benzoxazole derivatives as a potential antimicrobial and antioxidant agent were synthesized via coupling of N‐methyl‐o‐phenylenediamine or 2‐amino‐phenol with aromatic aldehyde and acid in the presence of polyphosphoric acid as an efficient catalyst as well as solvent by conventional method in short reaction times with excellent yield. The newly synthesized benzimidazole and benzoxazole derivatives were evaluated for antimicrobial and antioxidant activity and exhibited excellent to good activities compared to the standard drugs. Furthermore, the theoretical predictions based on molecular docking against microbial DNA gyrase could provide an insight into the plausible mechanism of action and establish a link between the observed antimicrobial activity and the binding affinity shedding light on specific thermodynamic (bonded and nonbonded) interactions governing the activity. Furthermore, the synthesized compounds were analyzed for absorption, distribution, metabolism, and excretion properties and exhibited potential properties to build up as good oral drug candidates.     

Pyrazole‐4‐carboxylic Acids from Vanadium‐catalyzed Chemical Transformation of Pyrazole‐4‐carbaldehydes

The conversion of aldehydes into carboxylic acids using oxidizing agents is a common protocol in transformation chemistry. An efficient oxidation strategy of transformation of pyrazole‐4‐aldehydes to the corresponding acids using vanadium catalysts in the presence of 30% H₂O₂ as an oxidant is described. The catalytic technology was successfully applied to a range of various 4‐formylpyrazoles, and plausible mechanism is also discussed.     

Metal-free synthesis of pyridin-2-yl ureas from 2-aminopyridinium salts

An unprecedented base promoted domino approach has been developed for the synthesis of pyridin-2-yl urea derivatives via the reaction of 2-aminopyridinium salts and arylamines. The developed strategy tolerated a wide range of functional groups and afforded pyridin-2-yl ureas in moderate to good yields. The reaction was postulated to involve tandem cyclization, intermolecular nucleophilic addition, ring opening, and demethylation.     

Synthesis of silver nanoparticles in an aqueous suspension of graphene oxide sheets and its antimicrobial activity

A solution-based approach to the synthesis of silver (Ag) nanoparticles by chemical reduction of AgNO(3) in a graphene oxide (GrO) suspension is demonstrated. X-ray diffraction and transmission electron microscopy indicate that the Ag nanoparticles, of size range 5-25nm, were decorated on the GrO sheets. The size and shape of the Ag nanoparticles are dependent on the concentration of the AgNO(3) solution. Antimicrobial activity of such hybrids materials is investigated against the Gram negative bacteria Escherichia coli and Pseudomonous aeruginosa. The bacterial growth kinetics was monitored in nutrient broth supplemented with the Ag nanoparticle-GrO suspension at different conditions. It was observed that P. aeruginosa is comparatively more sensitive to the Ag nanoparticle-GrO suspension.     

Ring-closing metathesis reactions of terminal alkene-derived cyclic phosphazenes

The first examples of ring-closing metathesis (RCM) reactions of a series of terminal alkene-derived cyclic phosphazenes have been carried out. The tetrakis-, hexakis-, and octakis(allyloxy)cyclophosphazenes (NPPh(2))(NP(OCH(2)CH=CH(2))(2))(2) (1), N(3)P(3)(OCH(2)CH=CH(2))(6) (2), and N(4)P(4)(OCH(2)CH=CH(2))(8) (3) and the tetrakis(allyloxy)-S-phenylthionylphosphazene (NS(O)Ph)[NP(OCH(2)CH=CH(2))(2)](2) (4) were prepared by the reactions of CH(2)=CHCH(2)ONa with the cyclophosphazenes (NPPh(2))(NPCl(2))(2), N(3)P(3)Cl(6), and N(4)P(4)Cl(8) and the S-phenylthionylphosphazene (NS(O)Ph)(NPCl(2))(2). The reactions of 1-4 with Grubbs first-generation olefin metathesis catalyst Cl(2)Ru=CHPh(PCy(3))(2) resulted in the selective formation of seven-membered di-, tri-, and tetraspirocyclic phosphazene compounds (NPPh(2))[NP(OCH(2)CH=CHCH(2)O)](2) (5), N(3)P(3)(OCH(2)CH=CHCH(2)O)(3) (6), and N(4)P(4)(OCH(2)CH=CHCH(2)O)(4) (7) and the dispirocyclic S-phenylthionylphosphazene compound (NS(O)Ph)[NP(OCH(2)CH=CHCH(2)O)](2) (8). X-ray structural studies of 5-8 indicated that the double bond of the spiro-substituted cycloalkene units is in the cis orientation in these compounds. In contrast to the reactions of 1-4, RCM reactions of the homoallyloxy-derived cyclophosphazene and thionylphosphazene (NPPh(2))[NP(OCH(2)CH(2)CH=CH(2))(2)](2) (9) and (NS(O)Ph)[NP(OCH(2)CH(2)CH=CH(2))(2)](2) (10) with the same catalyst resulted in the formation of 11-membered diansa compounds NPPh(2)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)](2) (11) and (NS(O)Ph)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)](2) (13) and the intermolecular doubly bridged ansa-dibino-ansa compounds 12 and 14. The X-ray structural studies of compounds 11 and 13 indicated that the double bonds of the ansa-substituted cycloalkene units are in the trans orientation in these compounds. The geminal bis(homoallyloxy)tetraphenylcyclotriphosphazene [NPPh(2)](2)[NP(OCH(2)CH(2)CH=CH(2))(2)] (15) upon RCM with Grubbs first- and second-generation catalysts gave the spirocyclic product [NPPh(2)](2)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)] (16) along with the geminal dibino-substituted dimeric compound [NPPh(2)](2)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)(2)PN][NPPh(2)](2) (17) as the major product. The dibino compound 17, upon reaction with the Grubbs second-generation catalyst, was found to undergo a unique ring-opening metathesis reaction, opening up the bino bridges and partially converting to the spirocyclic compound 16.     

A simple CdS nanoparticles cascading approach for boosting N3 dye/ZnO nanoplates DSSCs overall performance

Enhanced photosensitization in presence of CdS nanoparticles is achieved in electrochemically deposited ZnO nanoplates and N3 loaded dye-sensitized solar cells. Chemically embedded CdS nanoparticles act as a sandwiching layer between ZnO nanoplates and dye molecules by overcoming current limiting serious Zn²⁺/dye insulating complex formation and CdS photo-corrosion issues. The X-ray diffraction and the scanning electron microscopy confirm the ZnO with vertically aligned nanoplates, perpendicular to the substrate surface. Amorphous CdS is monitored using electron dispersive X-ray analysis. The low and high resolution transmission electron microscope images confirm the presence of CdS nanoparticles over ZnO nanoplates which later is supported by an increase in optical absorbance and shift in band edge. About 400% increase in solar conversion efficiency with this cascade arrangement is achieved when compared with without CdS which could be fascinating while designing solid state solar cells in presence of suitable p-type layer.