Underwater sediment analyses by laser induced breakdown spectroscopy and calibration procedure for fluctuating plasma parameters

Laser Induced Breakdown Spectroscopy (LIBS) was applied on sediments directly under water. The aim of the research was to develop a method for measuring the sediment elemental composition, including minor elements, which could be implemented in-situ. The plasma was generated by a double-pulse, Q-Switched Nd:YAG laser operated at 1064 nm. For signal detection, both ICCD and non-gated, compact detectors were used. The major difficulties in underwater sediment analyses are related to the natural and laser induced surface roughness, and to the sample softness. The latter is responsible for the formation of particle clouds above the surface, which scatter both the laser and plasma radiation, and often results in breakdown formation above the analyzed surface. In such cases, a broad sonoluminescence emission from water, formed during the gas bubble collapse was sometimes registered. Under optimized experimental conditions, even by using a non-gated detector and single shot acquisition, it was possible to detect several minor sediment constituents, such as titanium, barium, manganese and others. A crude estimation of the Limit of Detection (LODs) for these elements was performed by underwater measurements on certified soils/sediments. Due to strong shot-to-shot fluctuations in the plasma temperature, well correlated calibration curves, aimed for quantitative analyses, could only be obtained after applying an appropriate data processing procedure. The latter selects automatically only the spectra characterized by similar plasma parameters, which are related to their continuum spectral distribution. Application of such a procedure improves the measurement accuracy also in other surroundings and on samples different from the ones analyzed here.     

Contamination level of Danube river sediments

The paper presents a survey of the contamination level of the Danube river sediments along its course, between 849 km and 1162 km, during the period 1985–1988. Sampling was performed on several locations in the seasons with extreme hydrological conditions (spring, autumn).     

Surface recombination in breakdown time delay experiments: Effect of different cathode materials

The late afterglow in nitrogen with iron electrode is studied by the breakdown time delay method, i.e., by measuring the breakdown time delay t_d as a function of the afterglow time . It is proposed that the cause of the secondary electrons initiating the breakdown is the energy of the surface recombination of nitrogen atoms on the iron electrode. The gas-phase and macrokinetic diffusive models are used to describe the experimental breakdown time delay data. By fitting the theoretical curve to the experimental data: (1) it has been confirmed that the recombination on the molybdenum glass is of the second order and the value of the surface recombination coefficient is determined at 4 mbar; (2) it has been shown that the surface recombination on the iron electrode is of the second order, and the effective recombination coefficients are determined; (3) the analytical form of the recombination coefficient as a function of the adsorption characteristics of surfaces and the pressure of the parent gas has been derived. In addition, the orders of surface recombination on the molybdenum-, aluminum-, and gold-plated electrode were determined by the same method.     

In Situ Amperometric Detection of Vesicles and Microgel Phases in an Aggregating System: Calcium Alginate

In situ amperometric characterization of an aggregating system in terms of molecular adsorption and single microparticle interactions at the electrode interface is demonstrated using a model system: alginate/Ca(II) in an aqueous electrolyte solution. Recording of chronoamperometric curves of oxygen reduction at the dropping mercury electrode is designed for detection of dip‐shaped signals of individual gel microparticles. By addition of Ca(II) decrease of alginate adsorption is accompanied by appearance of signals indicating vesicle type association of alginate molecules and microparticles of gel phase. AFM imaging provided evidence of initial stage in calcium alginate gel formation.     

Investigation of the Flavonoids in Croatian Propolis by Thin-Layer Chromatography

JPC – Journal of Planar Chromatography – Modern TLC - Flavonoids and phenolic acids with a variety of biological activity are considered to be the main compounds in propolis–a...     

Comparison of quantitative methods for analysis of polyphasic pharmaceuticals

Adequate very sensitive quantification methods are needed for the development and are also now required for the monitoring of undesirable solid form(s) as routine tests. The pre-requisite for quantitation are selectivity, sensitivity and most important the purity of standards and their proper storage, what is a challenge for metastable forms. Several analytical techniques are available such as X-ray diffraction, spectroscopy, thermal analysis and microcalorimetry. The different steps of the validation of the analytical methods and problems to be solved are discussed. Examples illustrate the different techniques and compare their possible advantages and limits. The relative standard deviation of measurements should allow for checking the homogenization procedure of mixtures for calibration. The validation should be carried out following ICH guidelines for validation of analytical methods. Comparison of different techniques in adequate concentration range add confidence in the analytical results.     

Temperature influence on hydrogen sorption in palladium limited-volume electrodes (Pd-LVE)

The effect of temperature on hydrogen and deuterium electrosorption into a palladium LVE (limited-volume electrode) has been investigated. A decrease in hydrogen capacity (H/Pd ratio) with increasing temperature has been observed. Temperature strongly influences the plots of measured H(D)/Pd values vs. potential scan rate. In addition, hydrogen absorption was found to be dependent on the composition of the surrounding electrolyte solution. These results have confirmed the hypothesis that two different mechanisms of hydrogen desorption from the palladium electrode take place, namely electrochemical oxidation and non-electrochemical recombination. Further, the ratio between the rate constants for these two processes has been found to change with temperature. Electronic Publication     

Kinetics of thermal decomposition of alkaline phosphates

Summary The thermal behavior of KH₂PO₄, NaH₂PO₄ and Na₂HPO₄ under non-isothermal conditions using TG method with different heating rates was studied. The values of the reaction rate were processed by means of Friedmans differential-isoconversional method. A dependence of the activation energy vs. conversion was observed. Therefore a procedure based on the compensation effect (suggested by Budrugeac and Segal) was applied. A less speculative data processing protocol was offered by the non-parametric kinetics method suggested by Serra, Nomen and Sempere. Three steps were observed by non-isothermal heating: a dehydration, a dimerization and a polycondensation. The differences in the intimate reaction mechanism are determined by the initial number of water molecules.