Preparation of the Enantiomerically Enriched Isomers of the Odorous Cyclic Ethers Clarycet ®, Florol ®, and Rhubafuran ® by Enzymatic Catalysis

All the enantiomerically enriched stereoisomers of Clarycet ^® ( 1 ), Florol ^® ( 2 ), and Rhubafuran ^® ( 3 ) were prepared by biocatalysis routes. Their absolute configurations were established, and their olfactory properties were fully evaluated.     

Enzyme-Mediated Preparation of (+)- and (–)-cis-α-Irone and (+)- and (–)-trans-α-Irone

The preparation of (−)- and (+)-trans-α-irone ( 1a and 1b , resp.) and of (+)- and (−)-cis-α-irone ( 1c and 1d , resp.) from commercially available Irone alpha ^® is reported. The relevant step in the synthetic sequence is the initial chromatographic separation of crystalline (±)-4,5-epoxy-4,5-dihydro-cis-α-irone ((±)- 5 ) from oily (±)-4,5-epoxy-4,5-dihydro-trans-α-irone ((±)- 4 ). The latter was subsequently converted, after NaBH₄ reduction, into the crystalline 3,5-dinitrobenzoate ester (±)- 8 , thus allowing a complete separation of the two corresponding diastereoisomeric alcohol derivatives. Suitable enantiomerically pure precursors of the desired products 1a – d were obtained by kinetic resolution of the racemic allylic alcohols derived from (±)- 5 and (±)- 8 , mediated by lipase PS (Amano). The last steps consisted of MnO₂ oxidation and removal of the epoxy moiety with Me₃SiCl/NaI in MeCN. External panel olfactory evaluation showed that (−)-cis-α-irone ( 1d ) has the finest and most distinct `orris butter' character.     

Pharmacognostic and acute toxicological evaluation of Scaptotrigona aff. postica propolis extract in pre-clinical assays

The propolis of Scaptotrigona aff. postica is popularly used in Maranh?o State, Brazil, for treating wounds and respiratory illnesses. Nevertheless, little is known about the chemical composition of this propolis and the adverse effects of its use. Hence, this study is a pharmacognostic characterisation of the propolis hydroalcoholic extract (PHE) from S. aff. postica. The methodology consisted of an evaluation of the sensory and chemical parameters. Chemical analysis of PHE indicated high concentrations of phenolic and triterpens substances, and the absence of steroids. Additionally, we evaluated the acute toxicity of propolis using 48 Swiss male and female mice. The animals received single doses of PHE (1000, 2000 or 4000 mg kg?1) orally and were observed for 14 days. After this period, the mice were sacrificed and the blood was used for biochemical and haematological evaluation. PHE did not induce any death, and the acute treatment significantly reduced serum concentrations of alanine aminotransferase and alkaline phosphatase. The resultant data indicate that PHE from S. aff. postica has low toxicity when used orally, even in high doses.     

Asymptotic Information-Theoretic Detection of Dynamical Organization in Complex Systems

The identification of emergent structures in complex dynamical systems is a formidable challenge. We propose a computationally efficient methodology to address such a challenge, based on modeling the state of the system as a set of random variables. Specifically, we present a sieving algorithm to navigate the huge space of all subsets of variables and compare them in terms of a simple index that can be computed without resorting to simulations. We obtain such a simple index by studying the asymptotic distribution of an information-theoretic measure of coordination among variables, when there is no coordination at all, which allows us to fairly compare subsets of variables having different cardinalities. We show that increasing the number of observations allows the identification of larger and larger subsets. As an example of relevant application, we make use of a paradigmatic case regarding the identification of groups in autocatalytic sets of reactions, a chemical situation related to the origin of life problem.     

Calibration with relativistic and low velocity ions of a CR39 nuclear track detector

We present experimental results on the calibration of the CR9 nuclear track detector, manufactured by the Intercast Europe Co., of Parma (Italy). The calibration was performed with several ions of different kinetic energies: from 50 keV protons to 11.3 A GeV gold ions; β=v/c ranges from about 4·10⁻³ to about 1. We find that a single curve of the reduced etch rate p versus Restricted Energy Loss is able to describe all data. Furthermore the data are consistent with about 100% contribution of the nuclear energy loss to the CR39 response. This type of CR39 is used in the MACRO experiment at the Gran Sasso Laboratory.     

Crosslinking study of polyethers containing pendent double bonds

This article studies the crosslinking reactions of some polyethers containing double bonds on the side chains. Thermal crosslinking takes place in all cases, but is overlapped by the degradation process. So, a catalyst has to be used to obtain the cured material and avoid degradation. The best initiator appears to be dicumyl peroxide and the maximum cross-linking degree is achieved only with 5% (w/w). Thermogravimetric analyses are used to test the quality of the cured materials. IR spectroscopy shows that crosslinking actually takes place by polymerizing pendent double bonds. Furthermore, activation energies for thermal and radical initiated crosslinking are determined by means of dynamic DSC studies. © 1995 John Wiley & Sons, Inc.     

Improved thermosets obtained from cycloaliphatic epoxy resins and γ‐butyrolactone with lanthanide triflates as initiators. I. Study of curing by differential scanning calorimetry and Fourier transform infrared

3,4‐Epoxycyclohexylmethyl 3,4‐epoxycyclohexane carboxylate was cured with different proportions of γ‐butyrolactone with lanthanum, samarium, and ytterbium triflates as catalysts. The curing was studied with differential scanning calorimetry (DSC) and Fourier transform infrared in the attenuated‐total‐reflection mode (FTIR/ATR). FTIR/ATR was used to monitor the competitive reactive processes and to quantify the evolution of the epoxide, lactone, and intermediate spiroorthoester groups. The glass‐transition temperature of the crosslinked materials was high and increased when the proportion of lactone decreased. The kinetics were studied with DSC experiments and were analyzed with isoconversional procedures. The differences in the reactivities of the systems were related to the Lewis acidity of the lanthanide salt used as the initiator. An increase in the proportion of lactone produced an increase in the reaction rate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2337‐2347, 2005     

Reduction of the shrinkage of thermosets by the cationic curing of mixtures of diglycidyl ether of bisphenol A and 6,6‐dimethyl‐(4,8‐dioxaspiro[2.5]octane‐5,7‐dione)

Ytterbium and lanthanum triflates were used as initiators to cure mixtures of diglycidyl ether of bisphenol A and 6,6‐dimethyl‐(4,8‐dioxaspiro[2.5]octane‐5,7‐dione) in several proportions. The evolution of the epoxy and 6,6‐dimethyl‐(4,8‐dioxaspiro[2.5]octane‐5,7‐dione) bands during curing and the linear ester groups in the final materials were evaluated with Fourier transform infrared in the attenuated‐total‐reflection mode. The use of a conventional cationic initiator, boron trifluoride monoethylamine, was also studied to test the advantages of lanthanide triflates. The shrinkage after curing and the thermal degradability of the materials with variations in the comonomer ratio and the initiator were evaluated and related to the chemical structure of the final network. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6869–6879, 2006     

Cationic copolymerization of cycloaliphatic epoxy resin with a spirobislactone with lanthanum triflate as initiator: I. Characterization and shrinkage

3,4‐Epoxycyclohexylmethyl 3,4‐epoxycyclohexane carboxylate (ECH) was cured with different proportions of 1,6‐dioxaspiro [4,4]nonane‐2,7‐dione (s(γ‐BL)) using lanthanum triflate as a catalyst. The shrinkage undergone during curing was monitored by means of thermomechanical analysis (TMA) in isothermal experiments. Fourier transform infrared spectroscopy in attenuated‐total‐reflection mode (FTIR/ATR) was used to study the evolution of lactone, epoxide, and intermediate spiroorthoester (SOE) groups to identify the different reactions that take place during the curing process. DSC was used to study the thermal characteristics of the curing process and to assess the glass‐transition temperature (T_g) of the cured material. The dynamic mechanical properties of the cured material were determined based on the data obtained by DMTA. An increase in the proportion of s(γ‐BL) led to a decrease in the gelation time and the shrinkage after gelation. By combining the data obtained by TMA and FTIR/ATR, it was also possible to identify the reactive processes responsible for the shrinkage. It was observed that an increase in the proportion of s(γ‐BL) also increases the speed of the curing process and modifies the structure of the material, thus giving rise to more flexible materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3421–3432, 2005     

Magnetic Thomas-Fermi-Weizsäcker model for quantum dots: A comparison with Kohn-Sham ground states

The magnetic extension of the Thomas-Fermi-Weizs?cker kinetic energy is used within density-functional-theory to numerically obtain the ground state densities and energies of two-dimensional quantum dots. The results are thoroughly compared with the microscopic Kohn-Sham ones in order to assess the validity of the semiclassical method. Circular as well as deformed systems are considered. Received 26 October 2000 and Received in final form 14 December 2000