Economy of proficiency testing: reference versus consensus values

Many proficiency tests are operated with a consensus value derived from the participants’ results. Apart from technical issues, one of the reasons often mentioned is that proficiency tests operated with consensus values would be cheaper than those using reference values obtained from a priori characterisation measurements. The economy of a proficiency test must of course be balanced by the need of the participants, and the quality of the comparison in general. The proficiency tests selected in this study had both a reference value and a consensus value, one of which was used for assessing the performance of the participating laboratories. In this work, both a technical and an economical assessment of how the comparisons were operated is made. From the evaluation, it follows that usually the use of consensus values does not necessarily reduce the costs of a proficiency test. However, frequently it may be observed that the quality of the assessment of the laboratories is better with a reference value. Received: 11 October 2000 Accepted: 3 January 2001     

Chemoenzymatic synthesis of l-tyrosine derivative for a transketolase assay

We have prepared an l-tyrosine derivative bearing a d-threo ketose moiety by a convenient chemoenzymatic route. This compound is of potential interest for developing stereospecific assays for enzymes catalyzing C-C bond cleavage such as transketolase. We showed in vitro by analytical studies (LC/MS and ³¹P NMR) that this compound can release l-tyrosine in the presence of wild type TK extract and bovine serum albumin. This assay is the first step towards a mutant TK selection test that could be developed for yeast cells auxotrophic for l-tyrosine.     

Determination of the Nitrogen Content of Cationic Cellulose Fibers by Analytical Pyrolysis

 Analytical pyrolysis in combination with gas chromatography and mass spectrometry or a nitrogen-phosphorus detector, respectively, were used to characterize the quaternization reagent glycidyltrimethylammonium chloride and a cationic cotton fabric. Trimethylamine was shown to be the most abundant nitrogen-containing product in the pyrolysis of glycidyltrimethylammonium chloride and was thus used for the quantification of the nitrogen content of the cationic cotton fabric. The results were compared to those obtained by traditional methods such as Kjeldahl and elemental analysis. It could be shown that pyrolysis is well suited for monitoring the nitrogen content of cellulose fibers.     

High-pressure foaming properties of carbon dioxide-saturated emulsions

The aeration of emulsions with tailored properties and structure is of widespread importance in processing of foods and cosmetics. This report addresses the micro-cellular foam formation of carbon dioxide-saturated oil-in-water emulsions triggered by the application of a controlled pressure drop. The experimental setup combines a stirred pressure vessel with a pressure cell-equipped rheometer and pneumatic expansion valves. This allows to systematically study the process of gas dissolution, bubble nucleation, and growth under defined pressure, temperature, and flow conditions. Investigations on the impact of relevant process parameters show that dissolved gas fraction, emulsion viscosity, and shear rate have a major influence on foam formation. Dissolution of carbon dioxide leads to a viscosity reduction of the emulsion which and is described by a viscosity reduction factor. The point of bubble nucleation is derived from rheological patterns during depressurization. Experiments show that lower emulsion viscosity and higher shear rate favor bubble nucleation upon pressure release. Rheological results are supported by video analysis as the setup allows capturing nucleation, growth, and destabilization of bubbles as a function of pressure, supersaturation, and time. The results of this work yield the understanding of the high-pressure foaming mechanism from a rheological perspective and foster the design of such processes.