The Stille reaction in the synthesis of carotenoid butenolides: synthesis of 6'-epi-peridinin

A new strategy for carotenoid butenolides has been developed that is based in part in halogen-selective Stille cross-coupling of dihalogenated ylidenebutenolide segment 2 and highly functionalized alkenylstannanes. [reaction: see text]     

Self-assembled monolayers and chemical derivatization of Ba0.5Sr0.5TiO3 thin films: Applications in phase shifter devices

Thin films of barium strontium titanate (Ba_1−xSr_x TiO₃ (BSTO)) have been used in coupled microstrip phase shifters (CMPS) for possible insertion in satellite and wireless communication platforms primarily because of their high dielectric constant, low loss, large tunability, and good structural stability. In an attempt to improve the figure of merit K (phase shift °/dB of loss) of phase shifters, modification of the metal/BSTO interface of these devices has been done through surface modification of the BSTO layer using a self-assembled monolayer approach. The impact of this nanotechnology promises to reduce RF losses by improving the quality of the metal/BSTO interface. In this study, compounds such as 3-mercaptopropyltrimethoxysilane (MPS), 16-mercaptohexadecanois acid (MHDA) and 3-mercaptopropionic acid (MPA) were used to form the self-assembled monolayers on the BSTO surface. As a result of the previous modification, chemical derivatization of the self-assembled monolayers was done in order to increase the chain length. Chemical derivatization was done using 3-aminopropyltrimethoxysilane (APS) and 16-mercaptohexadecanoic acid. Surface chemical analysis was done to reveal the composition of the derivatization via X-ray photoelectron spectroscopy (XPS) and Fourier Transform Infrared (FT-IR). Low and high frequencies measurements of phase shifters were done in order measure the performance of these devices for insertion in antennas. X-ray photoelectron spectroscopy characterization of modified BSTO thin films with MPS showed a binding energy peak at 162.9 eV, indicative of a possible SO interaction: sulfur of the mercapto compound, MPS, used to modify the surface with the oxygen site of the BSTO thin film. This interaction is at higher binding energies compared with the thiolate interaction. This behavior is observed with the other mercapto compounds such as: MHDA and MPA. An FT-IR analysis present a band at 780 cm⁻¹, which is characteristic of an OSC stretching and reveals the modification of the BSTO thin film by the coupling of the O of the BSTO with the S of the mercapto compound. All the modification using mercapto compounds is through sulfur to the BSTO thin film. MHDA SAM on BSTO thin film was chemically derivatized using APS shown by XPS and FT-IR. The SAMs modified phase shifters showed an improvement in performance with respect to those phase shifters fabricated with standard methods.     

Synthesis of ring-oxidized retinoids as substrates of mouse class I alcohol dehydrogenase (ADH1)

Ring-oxidized retinoids have been synthesized stereoselectively using the Stille cross-coupling reaction. Kinetic constants of mouse class I alcohol dehydrogenase (ADH1) with these retinoids were determined.     

A multicommutated flow system for determination of bismuth in milk shakes by hydride generation atomic fluorescence spectrometry incorporating on-line neutralization of waste effluent

A highly sensitive method was developed for determination of bismuth in milk shakes by multicommutation hydride generation atomic fluorescence spectrometry (HG-AFS) based on off-line sonication for 10 min with aqua regia 8% (v/v) and on-line waste treatment. The instrumentation and chemistry variables were studied in order to provide the best performance. The limit of detection in the original samples, established for a probability level of 99.6% (k = 3), was 1.67 ng/g Bi. The method provides a fast alternative in control analysis with a sampling throughput of 72 h as compared with 31 h obtained by the classical continuous measurement. Additionally, multicommutation reduces waste generation by a factor of 2.6. The consumption of sample, reductant, and blank, as compared with continuous mode HG-AFS, was reduced 9.6, 4.5, and 13.3 times, respectively. To confirm the accuracy of the method, recovery studies were performed, and excellent agreement between multicommutation and continuous measurement-based values was obtained. Application of the developed methodology for bismuth determination in milk shake samples from the Spanish market provided concentrations ranging from 4.2 to 15.0 ng/mL, and good comparability with data obtained by continuous measurements after microwave-assisted total digestion of samples for a 95% probability level and 12 degrees of freedom was found.     

High focal depth with fractional-power wave fronts

We explore the use of phase profiles with fractional power for tailoring modulation transfer functions with high focal depth at high pupil apertures. We present numerical simulations of the images that can be obtained with certain fractional-power profiles.     

Determination of the optimal wavelength for temperature independent detection of commercial gasoline with a polymer cladding optical fiber

An influence of temperature variations on transmission of a polymer cladding silica core (PCS) optical fiber was investigated in a wide spectral range covering the first (1710 nm) and the second (1170 nm) vibrational overtone bands of gasoline absorption. Thermo-induced changes of the fiber background transmittance have strong dependence on wavelength. A narrow wavelength band around 1214 nm was found to be almost free from the thermal effects while maintaining sufficient sensitivity for gasoline detection.     

Braided Logic: The Simplest Models

The only pair of binary classical essential connectives for which the Artin braid relation holds is a distributive lattice, i.e. the Boolean disjunction and conjunction of     

The effect of sample salt additives on capillary electrophoresis analysis of intact proteins using surface modified capillaries

The effect of adding alkali salts to protein samples for capillary electrophoretic (CE) analysis of intact proteins was studied. A high degree of peak stacking, even for large proteins, was found to occur when alkali salts were added to the sample. The addition of salt to the protein sample promotes a strong improvement in the peak efficiency of individual proteins giving up to 2.1 × 10⁶ apparent plates/m. The concentration of salt required in the sample to reach optimal peak efficiency show dependency on both the molecular weight and molar concentration of the protein. However, adding salt will, at a sufficiently high concentration, cause a mixture of proteins to co-migrate to one very sharp peak. The observed sample stacking effect was obtained with a number of different surface modified silica capillaries indicating a general phenomenon and not surface coating specific.     

Interferometry based on Lau effect with a grating registered in a photorefractive crystal

The use of a grating in the form of modulation of birefringence in a BSO crystal in a novel Lau interferometer set-up is proposed. The system behaves as a conventional Lau interferometer implemented by using two amplitude gratings. Moreover, it permits control of the visibility and provides a contrast inversion of the interferometric fringes by rotating a polarizer. Two alternative experimental arrangements with similar performance are presented. A theoretical approach is outlined and the predicted behavior is confirmed by results obtained under different experimental conditions.