Interaction of Fluorescently Labeled Triethyleneglycol and Peptide Derivatives with β‐Cyclodextrin

A triethyleneglycol (TEG) chain, a linear peptide, and a cyclic peptide labeled with 7‐methoxycoumarin‐3‐carboxylic acid (MC) and 7‐diethylaminocoumarin‐3‐carboxylic acid (DAC) were used to thoroughly study Förster resonance energy transfer (FRET) in inclusion complexes. ¹H NMR evidence was given for the formation of a 1:1 inclusion complex between β‐cyclodextrin (β‐CD) and the fluorophore moieties of model compounds. The binding constant was 20 times higher for DAC than for MC derivatives. Molecular modeling provided additional information. The UV/Vis absorption and fluorescence properties were studied and the energy transfer process was quantified. Fluorescence quenching was particularly strong for the peptide derivatives. The presence of β‐CDs reduced the FRET efficiency slightly. Dye‐labeled peptide derivatives can thus be used to form inclusion complexes with β‐CDs and retain most of their FRET properties. This paves the way for their subsequent use in analytical devices that are designed to measure the activity of matrix metalloproteinases.     

Tuning Aqueous Supramolecular Polymerization by an Acid-Responsive Conformational Switch

Besides their widespread use in coordination chemistry, 2,2’-bipyridines are known for their ability to undergo cis–trans conformational changes in response to metal ions and acids, which has been primarily investigated at the molecular level. However, the exploitation of such conformational switching in self-assembly has remained unexplored. In this work, the use of 2,2’-bipyridines as acid-responsive conformational switches to tune supramolecular polymerization processes has been demonstrated. To achieve this goal, we have designed a bipyridine-based linear bolaamphiphile, 1 , that forms ordered supramolecular polymers in aqueous media through cooperative aromatic and hydrophobic interactions. Interestingly, addition of acid (TFA) induces the monoprotonation of the 2,2’-bipyridine moiety, leading to a switch in the molecular conformation from a linear (trans) to a V-shaped (cis) state. This increase in molecular distortion along with electrostatic repulsions of the positively charged bipyridine-H⁺ units attenuate the aggregation tendency and induce a transformation from long fibers to shorter thinner fibers. Our findings may contribute to opening up new directions in molecular switches and stimuli-responsive supramolecular materials.     

Onion‐like Multifunctional Microtrap Vehicles for Attraction–Trapping–Destruction of Biological Threats

A multifunctional motile microtrap is developed that is capable of autonomously attracting, trapping, and destroying pathogens by controlled chemoattractant and therapeutic agent release. The onion‐inspired multi‐layer structure contains a magnesium engine core and inner chemoattractant and therapeutic layers. Upon chemical propulsion, the magnesium core is depleted, resulting in a hollow structure that exposes the inner layers and serves as structural trap. The sequential dissolution and autonomous release of the chemoattractant and killing agents result in long‐range chemotactic attraction, trapping, and destruction of motile pathogens. The dissolved chemoattractant (l ‐serine) significantly increases the accumulation and capture of motile pathogens (E. coli) within the microtrap structure, while the internal release of silver ions (Ag⁺) leads to lysis of the pathogen accumulated within the microtrap cavity.     

A study of coronene—coronene association using atom—atom pair potentials

A study of the coronene—coronene association using different interaction potentials based on an atom-atom pair potential proposed by Fraga has been performed. The interaction potentials employed differ in the way the electrostatic and/or dispersion contributions are computed. The influence of both contributions on the geometries predicted for the coronene dimer is discussed in order to analyze the effectiveness of the different interaction potentials. The stationary points found in each interaction energy hypersurface are characterized by calculating the Hessian eigenvalues. Results are discussed in the light of those previously reported for the benzene dimer. Stacked-displaced structures are suggested to be the preferred conformations for the coronene—coronene association. © 1996 John Wiley & Sons, Inc.     

Multicommutation-NIR determination of Hexythiazox in pesticide formulations

A multicommutated flow-system was designed in order to increase analytical throughput and for controlling thermal effects on the NIR spectra for determination of Hexythiazox in pesticide formulations. An on-line standard addition was carried out showing the versatility and repeatability of multicommutation for the on-line mixing and dilution of solutions. Results obtained for commercial samples were statistically comparable with those obtained by an HPLC-reference method. Multicommutation-NIR allows the analysis of 52 samples per hour, in front of the 30 samples per hour analyzed by the NIR-batch procedure and the 7 samples per hour analyzed by HPLC-reference method.     

Surface chemical and physical properties of TEOS-TBOT-PDMS hybrid materials

The application of nitrogen adsorption, mercury porosimetry and inverse gas chromatography (IGC) for the examination of surface physical and chemical properties of hybrid materials is discussed. Hybrid materials were prepared from tetraethoxysilane (TEOS), tetrabutyl orthotitanate (TBOT), and hydroxyl terminated polydimethyl siloxane (PDMS) for different TBOT concentrations. It was found that TBOT affects specific surface areas, pore volumes and pore sizes, but does not affect pore morphology. Surface chemical properties were analyzed by IGC. It was found that the dispersive surface energy was a function of the material pore size. Values between 36 and 42 mJ···m^-2 were obtained for the dispersive surface energy which are consistent with those of hybrid materials. On the other hand, the acid-base (k , k ) surface constants showed good correlation with the TBOT concentration. These materials can be considered as anphoteric ones, and it was found that k increases from 1.07 to 1.47, and k increases from 0.76 to 1.73 when the TBOT concentration increases from 0 to 7%. Such increase is assigned to the formation of Si–O–Ti bonds as it was deduced from an IR band appearing at 930 cm^-1 in the FT-IR spectra.     

A multicommuted stop-flow system employing LEDs-based photometer for the sequential determination of anionic and cationic surfactants in water

It has been developed an automatic stop-flow procedure for sequential photometric determination of anionic and cationic surfactants in a same sample of water. The flow system was based on multicommutation process that was designed employing two solenoid micro-pumps and six solenoid pinch valves, which under microcomputer control carry out fluid propelling and reagent solutions handling. A homemade photometer using a photodiode as detector and two light emitting diodes (LEDs) with emission at 470 nm (blue) and 650 nm (red) as radiation sources, which was tailored to allow the determination of anionic and cationic surfactants in waters. The procedure for anionic surfactant determination was based on the substitution reaction of methyl orange (MO) by the anionic surfactant sodium dodecylbenzene sulfonate (DBS) to form an ion-pair with the cetyl pyridine chloride (CPC). Features such as a linear response ranging from 0.35 to 10.5 mg L⁻¹ DBS (R = 0.999), a detection limit of 0.06 mg L⁻¹ DBS and a relative standard deviation of 0.6% (n = 11) were achieved. For cationic surfactant determination, the procedure was based on the ternary complex formation between cationic surfactant, Fe(III) and chromazurol S (CAS) using CPC as reference standard solution. A linear response range between 0.34 and 10.2 mg L⁻¹ CPC (R = 0.999), a detection limit of 0.05 mg L⁻¹ CPC and a relative standard deviation of 0.5% (n = 11) were obtained. In both cases, the sampling throughput was 60 determinations per hour. Reagents consumption of 7.8 μg MO, 8.2 μg CPC, 37.2 μg CAS and 21.6 μg Fe(III) per determination were achieved. Analyzing river water samples and applying t-test between the results found and those obtained using reference procedures for both surfactant types provide no significant differences at 95% confidence level.     

Mechanically Interlocked Single‐Wall Carbon Nanotubes

Extensive research has been devoted to the chemical manipulation of carbon nanotubes. The attachment of molecular fragments through covalent‐bond formation produces kinetically stable products, but implies the saturation of some of the C? C double bonds of the nanotubes. Supramolecular modification maintains the structure of the SWNTs but yields labile species. Herein, we present a strategy for the synthesis of mechanically interlocked derivatives of SWNTs (MINTs). In the key rotaxane‐forming step, we employed macrocycle precursors equipped with two π‐extended tetrathiafulvalene SWNT recognition units and terminated with bisalkenes that were closed around the nanotubes through ring‐closing metathesis (RCM). The mechanically interlocked nature of the derivatives was probed by analytical, spectroscopic, and microscopic techniques, as well as by appropriate control experiments. Individual macrocycles were observed by HR STEM to circumscribe the nanotubes.     

Research note on evaluation of the plastic deformation of beams under transverse impact

The permanent deformation of a rigid perfectly plastic beam subjected to a time-dependent line load is calculated. The beam has finite length, and the load is applied transversely in the middle of the span. At the initial time, the load is zero. Thereafter, the load has a triangular time dependence. For sufficiently large values of the peak load, static and moving plastic hinges appear, and the beam is subjected to plastic bending. Previous studies of this problem have provided a numerical solution of a system of approximate equations. In this article, a numerical solution of the system of exact equations is provided. The numerical results represent a significant improvement over those that were previously available.