Enzymatic oxidation of tert-butylcatechol in the presence of sulfhydryl compounds: Application to the amperometric detection of penicillamine

The high sensitivity that can be attained using an enzymatic system and mediated by 4-tert-butylcatechol (4-TBC) has been verified by on-line interfacing of a rotating biosensor and continuous flow/stopped-flow/continuous-flow processing. Horseradish peroxidase, HRP, [EC 1.11.1.7], immobilized on a rotating disk, in presence of hydrogen peroxide catalyzed the oxidation of 4-TBC, whose back electrochemical reduction was detected on glassy carbon electrode surface at −150 mV. Thus, when penicillamine (PA) was added to the solution, these thiol-containing compounds participate in Michael type addition reactions with 4-TBC to form the corresponding thioquinone derivatives, decreasing the peak current obtained proportionally to the increase of its concentration. The highest response for PA was obtained around pH 7. This method could be used to determine PA concentration in the range 0.02-80 μM (r = 0.998). The determination of PA was possible with a limit of detection of 7 nM, in the processing of as many as 50 samples per hour. The HRP-rotating biosensor was successfully applied to the determination of PA in pharmaceutical formulations.     

Multilayer sol-gel membranes for optical sensing applications: single layer pH and dual layer CO(2) and NH(3) sensors

Organo-silica sol-gel membranes have been prepared and demonstrated in a single layer format for pH measurement and multiple-layer format for both carbon dioxide and ammonia. The sensors are simple and versatile since the same chemistry and membranes are used for each sensor. The sensors use hydroxypyrenetrisulfonic acid (HPTS) as the indicator immobilized in a base-catalyzed sol-gel containing poly(dimethyl)siloxane, aminopropyltriethoxysilane (APTES) and tetraethylorthosilicate (TEOS). This indicator gel is over coated with a hydrophobic sol-gel to reduce cross reactivity to pH when either CO(2) or NH(3) are examined. The gels are very stable and the sensors retain response up to a 12-month period. Sensors can be stored in buffer or dry without loss of function and have response times to that are comparable to literature values.     

Analytical approaches to expanding the use of capillary electrophoresis in routine food analysis

Capillary Electrophoresis (CE) is becoming an ever more powerful analytical technique for the separation, identification, and quantification of a wide variety of compounds of interest in many application fields. Particularly in food analysis this technique can offer interesting advantages over chromatographic techniques because of its greater simplicity and efficiency. Nevertheless, CE needs to advance with regard to compatibility with sample matrices, sensitivity, and robustness of the methodologies in order to gain even wider acceptance in food analysis laboratories, specially for routine work. This article presents various approaches to expanding the analytical usefulness of CE in food analysis, discussing their advantages over conventional CE. These approaches focus on sample screening, automated sample preparation with on-line CE arrangements, and the automatic integration of calibration in routine analytical work with CE.     

Regioselective homogeneous hydrogenation of heteroaromatic nitrogen compounds by use of [RuH(CO)(NCMe)2(PPh3)2]BF4 as the precatalyst

Summary The complex [RuH(CO)(NCMe)₂(PPh₃)₂]BF₄ (1) is an efficient and regioselective catalyst precursor for the hydrogenation of polyaromatic nitrogen compounds such as quinoline (Q), isoquinoline (iQ), indole (ln), 5,6- and 7,8-benzoquinoline (BQ) and acridine (A) under relatively mild reaction conditions (125 °C, 4 atm H₂). The order of individual initial rates was: A > Q > 5,6-BQ > 7,8-BQ > ln > iQ, reflecting both steric and electronic effects. For the regioselective homogeneous hydrogenation of A to 9,10-dihydroacridine (DHA) catalysed by complex (1), a kinetic study was carried out; the experimentally determined rate law was r = k ₁ [Ru] [H₂]. These findings are consistent with a mechanism involving the hydrogenation of [RuH(CO)(A)(NCMe)(PPh₃)₂]BF₄ to yield DHA and the unsaturated species [RuH(CO)(NCMe)(PPh₃)₂]BF₄ in the rate-determining step.     

New zinc phosphates decorated by imidazole-containing ligands

Four new zinc phosphates [Zn(HPO4)(C6H9N3O2)] (1), [Zn(HPO4)(C4H6N2)].H2O (2), [Zn2(HPO4)2(C14H14N4)].2H2O (3), and [Zn(HPO4)(C14H14N4)] (4) were synthesized in the presence of d-histidine, 1-methylimidazole, 1,4-bis(imidazol-1-ylmethyl)benzene (L1), and 1,2-bis(imidazol-1-ylmethyl)benzene (L2), respectively, and their structures were determined by X-ray crystallography. The inorganic framework of compounds 1, 2, and 3 is composed of vertex-shared ZnO3N and HPO4 tetrahedra that form four rings, which, in turn, are linked to generate a one-dimensional ladder structure. In 1 and 2 the organic groups (monoimidazole ligand) are located at each side of the ladders, while in 3 the bisimidazole ligand, 1,4-bis(imidazol-1-ylmethyl)benzene, links the ladders together to form a novel 2D structure. Compound 1 is the first zinc phosphate framework to be templated by an N-bonded chiral amino acid. In 4 the zero-dimensional four rings are joined together by the linear bridging ligand, 1,2-bis(imidazol-1-ylmethyl)benzene, to generate a one-dimensional framework with a new face-to-face structural motif. The 3D structure of compound 4 is stabilized by hydrogen-bonding, pi-pi interactions, and C-H...pi interactions. The approach of incorporating multifunctional ligands into zinc phosphate frameworks and linking the inorganic zinc phosphates subunits by an organic ligand provides opportunities for the design of new inorganic-organic open frameworks.     

Mineral content and botanical origin of Spanish honeys

Eleven elements (Zn, P, B, Mn, Mg, Cu, Ca, Ba, Sr, Na and K) were determined by inductively plasma coupled spectrometry in 40 honey samples from different places of Spain and four different botanical origins: Eucalyptus (Eucalyptus sp.), Heather (Erica sp.), Orange-blossom (Citrus sinensis) and Rosemary (Rosmarinus officinalis). K, Ca and P show the higher levels with average concentrations ranged between 434.1-1935 mg kg⁻¹ for K; 42.59-341.0 mg kg⁻¹ for Ca and 51.17-154.3 mg kg⁻¹ for P. Levels of Cu (0.531-2.117 mg kg⁻¹), Ba (0.106-1.264 mg kg⁻¹) and Sr (0.257-1.462 mg kg⁻¹) are the lowest in all honey samples. Zn (1.332-7.825 mg kg⁻¹), Mn (0.133-9.471 mg kg⁻¹), Mg (13.26-74.38 mg kg⁻¹) and Na (11.69-218.5 mg kg⁻¹) concentrations were found strongly dependent on the kind of botanical origin.Results were submitted to pattern recognition procedures, unsupervised methods such as cluster and principal components analysis and supervised learning methods like linear discriminant analysis in order to evaluate the existence of data patterns and the possibility of differentiation of Spanish honeys from different botanical origins according to their mineral content. Cluster analysis shows four clusters corresponding to the four botanical origins of honey and PCA explained 71% of the variance with the first two PC variables. The best-grouped honeys were those from heather; eucalyptus honeys formed a more dispersed group and finally orange-blossom and rosemary honeys formed a less distinguishable group.     

Low-temperature single crystal X-ray diffraction and high-pressure Raman studies on [(CH3)2NH2]2[SbCl5]

The structure of bis(dimethylammonium) pentachloroantimonate(III), [(CH₃)₂NH₂]₂[SbCl₅], BDP, was studied at 15 K and ambient pressure by single-crystal X-ray diffraction as well as at ambient temperature and high pressures up to 4.87(5) GPa by Raman spectroscopy. BDP crystallizes in the orthorhombic Pnma space group with a=8.4069(4), b=11.7973(7), c=14.8496(7) Å, and Z=4; R₁=0.0381, wR₂=0.0764. The structure consists of distorted [SbCl₆]³⁻ octahedra forming zig-zag [{SbCl₅}_n]²ⁿ⁻ chains that are cross-linked by dimethylammonium [(CH₃)₂NH₂]⁺ cations. The organic and inorganic substructures are bound together by the N-H…Cl hydrogen bonds. The distortions of [SbCl₆]³⁻ units increase, partly due to the influence of the hydrogen bonds which became stronger, with decreasing temperature. The preliminary room temperature, high-pressure X-ray diffraction experiments suggest that BDP undergoes a first-order phase transition below ca. 0.44(5) GPa that destroys single-crystal samples. The transition is accompanied by changes in the intensities and positions of the Raman lines below 400 cm⁻¹.     

Synthesis, structural and larvicidal studies of some triorganotin 2-(p-chlorophenyl)-3-methylbutyrates

A series of triorganotin 2-(p-chlorophenyl)-3-methylbutyrates, (R₃SnO₂CCH(CH(CH₃)₂)C₆H₄Cl-4), where R = methyl, ethyl, n-propyl, n-butyl, phenyl and cyclo-hexyl, have been synthesized. Elemental analyses, Mössbauer, Infrared and NMR spectroscopies have been used to characterize their structures. Based on the spectroscopic results, all the complexes with the exception of the tricyclohexyl compound were found to be five-coordinated in the solid state while the tricyclohexyltin derivative was determined to be four-coordinated. Structural assignments based on spectroscopic data are supported by the crystallographic results of four of the triorganotin butyrates (trimethyl-, tri-n-propyl-, tri-n-butyl- and tricyclohexyltin 2-(p-chlorophenyl)-3-methylbutyrate). Multinuclear NMR spectroscopy studies indicated that all the complexes were tetrahedral in solution. Larvicidal activities of the complexes were evaluated against the 2nd instar stage of the Anopheles stephensi, Aedes aegypti and Culex pipiens quinquefasciatus mosquitoes. The toxicity data indicate that there does not appear to be any significant differences of the compounds towards the different mosquito species based on their averaged toxicity values. In addition, the toxicity of the triorganotin compounds towards the mosquito larvae was concluded to be dependent on both the compound and the species of mosquito larvae.     

Relaxation dynamics of a linear molecule in a random static medium: a scaling analysis

We present extensive molecular dynamics simulations of the motion of a single linear rigid molecule in a two-dimensional random array of fixed overlapping disklike obstacles. The diffusion constants for the center of mass translation, D(CM), and for rotation, D(R), are calculated for a wide range of the molecular length, L, and the density of obstacles, rho. The obtained results follow a master curve Drho(micro) approximately (L(2)rho)(-nu) with an exponent micro=-3/4 and 1/4 for D(R) and D(CM), respectively, that can be deduced from simple scaling and kinematic arguments. The nontrivial positive exponent nu shows an abrupt crossover at L(2)rho=zeta(1). For D(CM) we find a second crossover at L(2)rho=zeta(2). The values of zeta(1) and zeta(2) correspond to the average minor and major axis of the elliptic holes that characterize the random configuration of the obstacles. A violation of the Stokes-Einstein-Debye relation is observed for L(2)rho>zeta(1), in analogy with the phenomenon of enhanced translational diffusion observed in supercooled liquids close to the glass transition temperature.     

Genomic clustering of the Trypanosoma cruzi nonlong terminal L1Tc retrotransposon with defined interspersed repeated DNA elements

We have analyzed the genomic distribution and organization of the long interspersed nucleotide element (LINE) L1Tc, a nonlong terminal repeat (LTR) retrotransposon of Trypanosoma cruzi. The results indicate that the L1Tc element is dispersed along the parasite genome and that in some regions it is organized in tandem repeats. The data allowed us to define the existence of short direct-repeated sequences flanking the genomic L1Tc elements. Relevant is the finding that the LINE L1Tc is located in genomic regions rich in short interspersed nucleotide elements (SINE)-like sequences. In particular, the L1Tc element is found associated to E13-related sequences, redefined in this work and renamed RS13Tc, and to a newly described RS1Tc sequence. The RS1Tc sequence is present, per haploid genome, in about 3,200 copies. Northern blot analysis showed that the RS1Tc is being transcribed into RNAs of different sizes. The analysis of the chromosomal distribution of these elements in various strains of T. cruzi suggested that this type of clustering might be a common feature of the genome of these parasites.