Electrocyclic ring opening of cis-bicyclo[m.n.0]alkenes: the anti-Woodward-Hoffmann quest

The dubbed anti-Woodward-Hoffmann ring-opening reaction of cis-bicyclo[4.2.0]oct-7-ene to yield cis,cis-cycloocta-1,3-diene has been intensively studied with robust, high-level computational methods. This reaction has been found to proceed through a conrotatory allowed pathway to afford cis,trans-cycloocta-1,3-diene followed by E to Z isomerization, instead of a disrotatory forbidden pathway, as suggested. Computational calculations of kinetic isotope effects are consistent with this interpretation and the experimental values. The study of lower bicyclic homologues with [3.2.0], [2.2.0] and [2.1.0] skeletons indicates the feasibility of a mechanistic change towards the anti-Woodward-Hoffmann disrotatory path. This is clearly favored for the ring opening of the highly strained cis-bicyclo[2.1.0]pent-2-ene and is highly competitive with the conrotatory path for cis-bicyclo[2.2.0]hex-2-ene. Therefore, the rearrangement of the smallest bicyclic cyclobutene is predicted computationally to be an anti-Woodward-Hoffmann disrotatory electrocyclic ring-opening reaction.     

Analysis of mitochondrial DNA for authentication of meats from chamois (Rupicapra rupicapra), pyrenean ibex (Capra pyrenaica), and mouflon (Ovis ammon) by polymerase chain reaction-restriction fragment length polymorphism

The prevention of fraudulent labeling of game meat constitutes an important part of food regulatory control and quality assurance systems. A polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) analysis based on mitochondrial deoxyribonucleic acid (DNA) was developed for authentication of meats from chamois (Rupicapra rupicapra), pyrenean ibex (Capra pyrenaica), and mouflon (Ovis ammon). Amplification and restriction site analysis of a DNA fragment about 720 base pairs (bp) from the mitochondrial 12S rRNA gene of all analyzed species permitted the selection of Msel and Apol endonucleases for meat speciation. The 12S rRNA restriction profiles obtained allowed the unequivocal identification of chamois, pyrenean ibex, and mouflon/sheep and their differentiation from meats of domestic species such as cattle, goat, and swine. The highly variable mitochondrial D-loop gene was also targeted to attempt discrimination between mouflon and sheep meats. A D-loop region (700-1000 bp) was amplified and sequenced in all game and domestic species analyzed, and a primer set was designed for the selective amplification of a 370 bp DNA fragment from mouflon and sheep. PCR-RFLP analysis with the selected Maell enzyme generated a single electrophoretic profile characteristic for sheep, whereas 3 different fragment patterns were obtained for mouflon meats. Consequently, the PCR-RFLP technique developed can be routinely applied in inspection programs in order to verify the correct labeling of game species.     

Mutual Information and Quantum Discord in Quantum State Discrimination with a Fixed Rate of Inconclusive Outcomes

We studied the mutual information and quantum discord that Alice and Bob share when Bob implements a discrimination with a fixed rate of inconclusive outcomes (FRIO) onto two pure non-orthogonal quantum states, generated with arbitrary a priori probabilities. FRIO discrimination interpolates between minimum error (ME) and unambiguous state discrimination (UD). ME and UD are well known discrimination protocols with several applications in quantum information theory. FRIO discrimination provides a more general framework where the discrimination process together with its applications can be studied. In this setting, we compared the performance of optimum probability of discrimination, mutual information, and quantum discord. We found that the accessible information is obtained when Bob implements the ME strategy. The most (least) efficient discrimination scheme is ME (UD), from the point of view of correlations that are lost in the initial state and remain in the final state, after Bob’s measurement.     

Synthesis and characterization of new soluble aromatic polyamides derived from 1,4‐Bis(4‐carboxyphenoxy)‐2, 5‐di‐tert‐butylbenzene

Aromatic polyamides based on a novel bis(ether‐carboxylic acid) were synthesized by the direct phosphorylation condensation method. 1,4‐Bis(4‐carboxyphenoxy)‐2,5‐di‐tert‐butylbenzene was combined with various diamines containing flexible linkages and side substituents to render a set of eight novel aromatic polyamides. The polymers were produced with high yields and moderate to high inherent viscosities (0.49–1.32 dL/g) that corresponded to weight‐average and number‐average molecular weights (by gel permeation chromatography) of 31,000–80,000 and 19,000–50,000, respectively. Except for a single example, the polyamides were essentially amorphous and soluble in a variety of common solvents such as cyclohexanone, dioxane, and tetrahydrofuran. They showed glass‐transition temperatures of 250–295 °C (by differential scanning calorimetry) and 10% weight loss temperatures above 460 °C, as revealed by thermogravimetric analysis in nitrogen. Polymer films, obtained by casting from N,N‐dimethylacetamide solutions, exhibited good mechanical properties, with tensile strengths of 83–111 MPa and tensile moduli of 2.0–2.2 GPa. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 475–485, 2001     

Aromatic polyamides and polyimides derived from 3,3′-diaminobiphenyl: Synthesis,characterization, and molecular simulation study

In this article a new synthesis of 3,3′-diaminobiphenyl (3,3′-DABP) is described, along with the preparation and characterization of polyamides and polyimides based on it. Reactivity of this monomer was calculated by a molecular simulation study, using ab initio quantum-mechanical methods. Terephthaloyl and isophthaloyl chloride were used for the synthesis of polyamides, while 3,3′,4,4′-biphenylenetetracarboxylic acid dianhydride and 4,4′-(hexafluoroisopropylidene) diphthalic anhydride were used for the synthesis of polyimides. Medium to high molecular weight polymers were attained, with inherent viscosities near or higher than 1.0 dL/g, the solubility of the 3,3′-DABP polymers was much better than that of the homologous polymers from benzidine (4,4′-DABP), the glass-transition temperatures were lower, by about 40°C, and the thermal resistance, as measured by thermogravimetry, was virtually the same. Amorphous films, made from cast polymer solutions, showed excellent mechanical properties, comparable to conventional aromatic polyamides and polyimides. Theoretical calculations demonstrated that the radius of giration, end-to-end distance and density of poly(3,3′-DABP-isophthalamide) were lower than those of poly(4,4′-DABP-isophthalamide), as a consequence of the chain folding induced in the backbone by the m-substitution in 3,3′-DABP. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4646–4655, 1999     

Novel polyimides with p-nitrophenyl pendant groups. Synthesis and characterization

Polyimides derived from a new dianhydride with p-nitrophenyl pendant groups have been synthesized and their properties compared with those of a reference series, without side groups. The polymers were obtained by combination of the novel monomer with aromatic diamines, in a two-step procedure that involved the synthesis of poly(amic acid) or poly(amic silyl ester) intermediates and the cyclization of them to polyimides by thermal treatment. The introduction of the polar nitro groups caused significant increase of the T_gs. On the contrary, the thermal stability was reduced because of the breakdown of C_Ar—NO₂ linkages around 400^oC. A slight decrease in mechanical properties was observed, due to the bulkiness of the side groups, that also produced an important decrease in the strength of the β relaxation, as determined by dynamic mechanical analysis. The solubility of the current polyimides in organic solvents was as poor as that of the parent unsubstituted polymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3377–3384, 1999     

Synthesis and characterization of novel polyimides with bulky pendant groups

New dianhydrides containing t‐butyl and phenyl pendant groups have been synthesized and used as monomers, together with commercial diamines, to prepare novel polyimides. The influence of the chemical structure of the monomers on their reactivity has been studied by quantum semiempirical methods. The polyimides have been characterized by FTIR and by NMR in the case of soluble polymers. The presence of pendant groups and the method used to imidize polyimide precursors greatly affected polymer properties such as solubility, glass transition temperature, thermal stability, and mechanical properties. As a rule, the novel polyimides showed better solubility in organic solvents than the parent polyimides. Glass transition temperatures in the range 250–270°C and decomposition temperatures over 520°C were observed for the set of current polymers. Tensile strengths up to 135 MPa and mechanical moduli up to 3.0 GPa were measured on films of the current polyimides. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 805–814, 1999