Enhancement of surface mechanical properties by using TiN[BCN/BN]n/c-BN multilayer system

The aim of this work is to improve the mechanical properties of AISI 4140 steel substrates by using a TiN[BCN/BN]_n/c-BN multilayer system as a protective coating. TiN[BCN/BN]_n/c-BN multilayered coatings via reactive r.f. magnetron sputtering technique were grown, systematically varying the length period (Λ) and the number of bilayers (n) because one bilayer (n = 1) represents two different layers (t_BCN + t_BN), thus the total thickness of the coating and all other growth parameters were maintained constant. The coatings were characterized by Fourier transform infrared spectroscopy showing bands associated with h-BN bonds and c-BN stretching vibrations centered at 1400 cm⁻¹ and 1100 cm⁻¹, respectively. Coating composition and multilayer modulation were studied via secondary ion mass spectroscopy. Atomic force microscopy analysis revealed a reduction in grain size and roughness when the bilayer number (n) increased and the bilayer period decreased. Finally, enhancement of mechanical properties was determined via nanoindentation measurements. The best behavior was obtained when the bilayer period (Λ) was 80 nm (n = 25), yielding the relative highest hardness (∼30 GPa) and elastic modulus (230 GPa). The values for the hardness and elastic modulus are 1.5 and 1.7 times greater than the coating with n = 1, respectively. The enhancement effects in multilayered coatings could be attributed to different mechanisms for layer formation with nanometric thickness due to the Hall-Petch effect; because this effect, originally used to explain increased hardness with decreasing grain size in bulk polycrystalline metals, has also been used to explain hardness enhancements in multilayered coatings taking into account the thickness reduction at individual single layers that make up the multilayered system. The Hall-Petch model based on dislocation motion within layered and across layer interfaces has been successfully applied to multilayered coatings to explain this hardness enhancement.     

Surface monitoring based on light scattering by metal nanosensors

Light scattering from objects in the proximity of surfaces is of fundamental importance in a variety of surface- and field-enhanced optical sensing, spectroscopy and microscopy applications. Here, we present surface monitoring techniques based on the spectral analysis of the scattered light by metal nanoparticles which act as sensors (nanosensors) of sample substrates interacting with them. We will focus on the detection of surface inhomogeneities by studying the modifications undergone by the local fields produced in the surrounding of the nanosensor, giving rise to spectral changes in its Plasmon Resonances. We will also describe an alternative technique where the sample information is obtained from the changes induced in the linear polarization degree of the far field scattered by the tip and due to the interaction with the sample.     

Correlations in a Mozart's music score (K-73x) with palindromic and upside-down structure

In this work, we study long-range correlations in a “Scherzo-Duetto di Mozart” score (K-73x) for two violins. This is a fascinating piece, as the second violin part is upside down on the same sheet below the first violin, and some parts are like a palindrome. Given such ingenious structure, it is expected the existence of long-range correlations in the score structure. In order to quantify long-range correlations, we considered the music score as a sequence of integer numbers, each of them corresponding to last common denominator units of note. By using detrended fluctuation analysis (DFA), correlations are quantified by means of the scaling exponent that reflects the type of correlations for a given distance between neighbors note. The following conclusions can be drawn from the analysis: (a) For about 10-25 neighbor note distances, correlations are similar to 1/f-noise. This is an interesting finding since it has been shown that pleasant sounds for humans display a behavior similar to 1/f noise. (b) As the neighbor note distance increases, the long-range correlations decays continuously. For some score sections, the music score behaves like non-correlated (i.e., purely random) noise. Summing up, the results show that the studied Mozart's score contains a certain degree of correlation for relatively small note distances, and becomes close to non-correlated behavior for long note distances. We considered also the sequence constructed by considering the distance between the simultaneously played notes of the two violins. Interestingly, for relatively small neighbor note distances, a scaling behavior similar to that found for individual violins is also displayed. In some sense, this is an expression of the specific structure (palindromes plus upside down construction) used by Mozart in the composition of this music score. Although we focused on a particular high-art music score, our results suggest that modern methods borrowed from statistical physics can be useful for the systematic study of music composition techniques.     

Chaos and unpredictability in evolutionary dynamics in discrete time

A discrete-time version of the replicator equation for two-strategy games is studied. The stationary properties differ from those of continuous time for sufficiently large values of the parameters, where periodic and chaotic behavior replace the usual fixed-point population solutions. We observe the familiar period-doubling and chaotic-band-splitting attractor cascades of unimodal maps but in some cases more elaborate variations appear due to bimodality. Also unphysical stationary solutions can have unusual physical implications, such as the uncertainty of the final population caused by sensitivity to initial conditions and fractality of attractor preimage manifolds.     

A simple model for magnetic after-effects in magnetite at room temperature

Magnetic after-effects in vacancy-doped magnetite at room temperature are considered on the basis of a statistical thermodynamic treatment. In this paper we study the kinetics of a very small vacancy concentration distributed on the four non-equivalent octahedral sites of the inverse spinel structure. It is to be noted that satisfactory agreement is found between recent experimental results and the theoretical model.     

The degree of hybridization in paramagnetic complexes

It is argued that in a series of complexes formed by ions of the same type and having the same geometry and ligand the degree of hybridization $\text{?}{}_{\mathrm{s}}\text{?}{}_{\mathrm{\sigma }}$ tends to decrease when covalency increases. This rule which discards any sp² explanation for the ligand hybridization has been well verified through series of d⁹ and s¹ complexes. The validity of such a rule, also useful for understanding the behaviour of $\text{?}{}_{\mathrm{s}}\text{?}{}_{\mathrm{gs}}$ in some D_2h systems, outlines that ligand core polarization effects are negligible in these cases.     

Ultrasonic studies of attenuation and dispersion in NH4Br near the order-disorder transition

Velocity and attenuation of sound wave propagation along the [100] direction in NH₄Br were measured near its transition temperature T_c = 234.5 K at frequencies of 30–150 MHz. The experimental results for the high-frequency attenuation and the dispersive velocity shifts are found to be in good agreement with the model of a single critical relaxation time.     

Synthesis of carbon nanotubes by CVD: Effect of acetylene pressure on nanotubes characteristics

The effect of acetylene partial pressure on the structural and morphological properties of multi-walled carbon nanotubes (MWCNTs) synthesized by CVD on iron nanoparticles dispersed in a SiO₂ matrix as catalyst was investigated. The general growing conditions were: 110 cm³/min flow rate, 690 °C synthesis temperature, 180 Torr over pressure and two gas compositions: 2.5% and 10% C₂H₂/N₂. The catalyst and nanotubes were characterized by HR-TEM, SEM and DRX. TGA and DTA were also carried out to study degradation stages of synthesized CNTs. MWCNTs synthesized with low acetylene concentration are more regular and with a lower amount of amorphous carbon than those synthesized with a high concentration. During the synthesis of CNTs, amorphous carbon nanoparticles nucleate on the external wall of the nanotubes. At high acetylene concentration carbon nanoparticles grow, covering all CNTs’ surface, forming a compact coating. The combination of CNTs with this coating of amorphous carbon nanoparticles lead to a material with high decomposition temperature.     

Design of a continuous wave blood flow bi-directional Doppler system

This paper describes the design of a continuous wave blood flow bi-directional Doppler system based on an open, high-resolution architecture that is portable and low cost. The system incorporates the advantages of expensive systems with dedicated hardware. The system is composed of a flow detector probe, a signal conditioning stage, a direction detection module, a signal processing stage and a graphic user interface. The direction detection of the signal is achieved using a fast digital phasing filter. The Doppler signal is processed using a short-time Fourier transform-based algorithm. This is commonly used as a reference. Nevertheless, the system allows us to incorporate alternative high-resolution spectral estimation methods that might offer more precise information to the specialist.     

Investigation of gain and hyperfine splitting in the niobium X-ray laser

Neon-like niobium X-ray lasers have been studied using both slab and thin-foil target geometries. Niobium foils of various lengths were irradiated from both sides with two beams of the frequency-doubled Nova laser system using a line focus. We looked for gain by measuring spectrally integrated line intensities at different plasma lengths. Gain was observed in four neon-like niobium lines corresponding to 3s–3p transitions. The line profile of theJ = 0–1 line ( = 145.9 ) shows splitting due to the hyperfine effect. Improved contrast in the hyperfine structure is observed as the plasma length is increased. Hyperfine splitting may be relevant to other 3s–3p transitions in neon-like niobium as well as other neon-like X-ray laser systems.