Assessment of enzyme-linked immunosorbent assay for the determination of 2,4,5-TP in water and soil

A highly sensitive and specific indirect enzyme-linked immunosorbent assay is described for Silvex, 2-(2,4,5 trichlorophenoxy)propionic acid, (2,4,5-TP). One specific feature of the immunoassay is the use of simple chemical activation of chlorophenoxy acids to prepare both the immunizing and coating conjugates. The assay is based on the use of polyclonal antibodies raised against 2,4,5-TP, and a peroxidase-labeled secondary antibody for colorimetric detection. The effect of different chemical conditions (pH, and salt and detergent concentration) on immunoassay performance has been studied. Under the best conditions the least detectable dose and the sensitivity (IC(50)) for 2,4,5-TP were 0.05 micro g L(-1) and 0.80 micro g L(-1), respectively. The optimized immunoassay was also highly specific, showing little (6.9% for 2,4,5-T) or no cross-reactivity with other similar herbicides. The assay was used to determine 2,4,5-TP in water and soils. The excellent recoveries obtained (mean values ranging between 89% and 104%) make this immunoassay a suitable screening method for either environmental monitoring or laboratory quantification of 2,4,5-TP.     

Enhancement by polydispersity of the biaxial nematic phase in a mixture of hard rods and plates

The phase diagram of a polydisperse mixture of uniaxial rodlike and platelike hard parallelepipeds is determined for aspect ratios kappa=5 and 15. All particles have equal volume, and polydispersity is introduced in a highly symmetric way. The corresponding binary mixture is known to have a biaxial phase for kappa=15, but to be unstable against demixing into two uniaxial nematics for kappa=5. The phase diagram for kappa=15 is qualitatively similar to that of the binary mixture, regardless of the amount of polydispersity, while for kappa=5 a sufficient amount of polydispersity stabilizes the biaxial phase. This provides clues for designing an experiment to observe this long searched biaxial phase.     

Phase-object analysis with a speckle interferometer

We describe the characteristics of a double-exposure specklegram obtained through a double-aperture system, by introduction of a wedge in front of one aperture in one exposure. It is assumed that a uniform displacement of the diffuser is produced between exposures. The average intensity distribution and visibility of the interferometric fringes in the Fourier plane are analyzed. An alternative interferometric technique for phase-object detection is proposed.     

Uncovering transport properties of 4,4'-bipyridine/gold molecular nanobridges

Here, the fascinating connection between the chemical and the transport properties of recently fabricated 4,4'-bipyridine/gold nanobridges is addressed. By means of first-principles ab initio calculations, the remarkable reproducibility of the 4,4'-bipyridine conductance properties is explained as the combined result of (i) the bonding of the molecule to the metallic leads through hybridization between the 4,4'-bipyridine highest occupied molecular orbitals and lowest unoccupied molecular orbitals (LUMOs) with s and d orbitals at low-coordination gold atoms, (ii) the limited number of molecule-lead arrangements due to gold-hydrogen steric repulsions, and (iii) the electron transmission through a LUMO-derived resonance, whose positioning with respect to the Fermi level determines which of the above arrangements yields nonnegligible conductance. Structural and electronic interpretations to the stepped dependence reported for the electronic transport of 4,4'-bipyridine as a function of the distance between the gold tips are also given.     

The Stille reaction in the synthesis of carotenoid butenolides: synthesis of 6'-epi-peridinin

A new strategy for carotenoid butenolides has been developed that is based in part in halogen-selective Stille cross-coupling of dihalogenated ylidenebutenolide segment 2 and highly functionalized alkenylstannanes. [reaction: see text]     

Self-assembled monolayers and chemical derivatization of Ba0.5Sr0.5TiO3 thin films: Applications in phase shifter devices

Thin films of barium strontium titanate (Ba_1−xSr_x TiO₃ (BSTO)) have been used in coupled microstrip phase shifters (CMPS) for possible insertion in satellite and wireless communication platforms primarily because of their high dielectric constant, low loss, large tunability, and good structural stability. In an attempt to improve the figure of merit K (phase shift °/dB of loss) of phase shifters, modification of the metal/BSTO interface of these devices has been done through surface modification of the BSTO layer using a self-assembled monolayer approach. The impact of this nanotechnology promises to reduce RF losses by improving the quality of the metal/BSTO interface. In this study, compounds such as 3-mercaptopropyltrimethoxysilane (MPS), 16-mercaptohexadecanois acid (MHDA) and 3-mercaptopropionic acid (MPA) were used to form the self-assembled monolayers on the BSTO surface. As a result of the previous modification, chemical derivatization of the self-assembled monolayers was done in order to increase the chain length. Chemical derivatization was done using 3-aminopropyltrimethoxysilane (APS) and 16-mercaptohexadecanoic acid. Surface chemical analysis was done to reveal the composition of the derivatization via X-ray photoelectron spectroscopy (XPS) and Fourier Transform Infrared (FT-IR). Low and high frequencies measurements of phase shifters were done in order measure the performance of these devices for insertion in antennas. X-ray photoelectron spectroscopy characterization of modified BSTO thin films with MPS showed a binding energy peak at 162.9 eV, indicative of a possible SO interaction: sulfur of the mercapto compound, MPS, used to modify the surface with the oxygen site of the BSTO thin film. This interaction is at higher binding energies compared with the thiolate interaction. This behavior is observed with the other mercapto compounds such as: MHDA and MPA. An FT-IR analysis present a band at 780 cm⁻¹, which is characteristic of an OSC stretching and reveals the modification of the BSTO thin film by the coupling of the O of the BSTO with the S of the mercapto compound. All the modification using mercapto compounds is through sulfur to the BSTO thin film. MHDA SAM on BSTO thin film was chemically derivatized using APS shown by XPS and FT-IR. The SAMs modified phase shifters showed an improvement in performance with respect to those phase shifters fabricated with standard methods.     

Synthesis of ring-oxidized retinoids as substrates of mouse class I alcohol dehydrogenase (ADH1)

Ring-oxidized retinoids have been synthesized stereoselectively using the Stille cross-coupling reaction. Kinetic constants of mouse class I alcohol dehydrogenase (ADH1) with these retinoids were determined.     

A multicommutated flow system for determination of bismuth in milk shakes by hydride generation atomic fluorescence spectrometry incorporating on-line neutralization of waste effluent

A highly sensitive method was developed for determination of bismuth in milk shakes by multicommutation hydride generation atomic fluorescence spectrometry (HG-AFS) based on off-line sonication for 10 min with aqua regia 8% (v/v) and on-line waste treatment. The instrumentation and chemistry variables were studied in order to provide the best performance. The limit of detection in the original samples, established for a probability level of 99.6% (k = 3), was 1.67 ng/g Bi. The method provides a fast alternative in control analysis with a sampling throughput of 72 h as compared with 31 h obtained by the classical continuous measurement. Additionally, multicommutation reduces waste generation by a factor of 2.6. The consumption of sample, reductant, and blank, as compared with continuous mode HG-AFS, was reduced 9.6, 4.5, and 13.3 times, respectively. To confirm the accuracy of the method, recovery studies were performed, and excellent agreement between multicommutation and continuous measurement-based values was obtained. Application of the developed methodology for bismuth determination in milk shake samples from the Spanish market provided concentrations ranging from 4.2 to 15.0 ng/mL, and good comparability with data obtained by continuous measurements after microwave-assisted total digestion of samples for a 95% probability level and 12 degrees of freedom was found.     

High focal depth with fractional-power wave fronts

We explore the use of phase profiles with fractional power for tailoring modulation transfer functions with high focal depth at high pupil apertures. We present numerical simulations of the images that can be obtained with certain fractional-power profiles.