Behaviors of the positive temperature coefficient of resistance of poly(styrene‐co‐n‐butylacrylate) filled with Ni‐plated core‐shell polymeric particles

Conductive composite films of poly(styrene‐co‐n‐butylacrylate) copolymers filled with low‐density, Ni‐plated core‐shell polymeric particles were prepared and their behaviors of positive temperature coefficient of resistance (PTCR) were investigated. When the conductive fillers in the composite film were loaded beyond the critical volume, 10 up to 25 vol %, composite films exhibited a unique electrical resistant transition behavior, which the electrical resistance rapidly increased by several orders of magnitude at the critical temperature. The PTCR transition temperature, in general, occurred before the glass transition temperature of polymer matrix. Further increased the conductive filler loading to 30 vol %, the overpacked conduction paths were formed in the entire composite and the PTCR effects became blurred. While the composite film treated with thermal cycle several times from room temperature up to 120 °C, the electrical resistivity increased accompanied with the shift of the PTCR transition to lower temperature. The reason might have been caused by the formed interfacial cracks within the composite film. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 322–329, 2007     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007     

Ethylene–propylene copolymerization with bis(β‐enaminoketonato) titanium complexes activated with modified methylaluminoxane

Ethylene–propylene copolymerization, using [(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂ (R₁ = CF₃, Ph, or t‐Bu; R₂ = CH₃ or CF₃) titanium complexes activated with modified methylaluminoxane as a cocatalyst, was investigated. High‐molecular‐weight ethylene–propylene copolymers with relatively narrow molecular weight distributions and a broad range of chemical compositions were obtained. Substituents R₁ and R₂ influenced the copolymerization behavior, including the copolymerization activity, methylene sequence distribution, molecular weight, and polydispersity. With small steric hindrance at R₁ and R₂, one complex (R₁ = CF₃; R₂ = CH₃) displayed high catalytic activity and produced copolymers with high propylene incorporation but low molecular weight. The microstructures of the copolymers were analyzed with ¹³C NMR to determine the methylene sequence distribution and number‐average sequence lengths of uninterrupted methylene carbons. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5846–5854, 2006     

Synthesis of TiO2–SiO2/polymer core–shell microspheres with a microphase‐inversion method

A novel microphase‐inversion method was proposed for the preparation of TiO₂–SiO₂/poly(methyl methacrylate) core–shell nanocomposite particles. The inorganic–polymer nanocomposites were first synthesized via a free‐radical copolymerization in a tetrahydrofuran solution, and the poor solvent was added slowly to induce the microphase separation of the nanocomposite and result in the formation of nanoparticles. The average particle sizes of the microspheres ranged from 70 to 1000 nm, depending on the reaction conditions. Transmission electron microscopy and scanning electron microscopy indicated a core–shell morphology for the obtained microspheres. Thermogravimetric analysis and X‐ray photoelectron spectroscopy measurements confirmed that the surface of the nanocomposite microspheres was polymer‐rich, and this was consistent with the core–shell morphology. The influence of the synthetic conditions, such as the inorganic composition and the content of the crosslinking monomer, on the particle properties was studied in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3911–3920, 2006     

A highly sensitive and rapid assay for protein determination in human urine and penicillin using a Rayleigh light-scattering technique with benzeneazo-8-acetylamino-1-naphthol-3,6-disulfonic acid sodium salt.

A simple and sensitive method was conducted for the determination of trace amounts of proteins with benzeneazo-8-acetylamino-1-naphthol-3,6-disulfonic acid sodium salt (azophloxine, AP) using a Rayleigh light-scattering (RLS) technique. At pH 2.60 and in the presence of an emulsifier OP microemulsion, the RLS of AP can be greatly enhanced by proteins, owing to the interaction between AP and protein. The enhanced intensity is proportional to the concentration of proteins. Four proteins, including bovine serum albumin (BSA), human serum albumin (HSA), lysozyme (Lys) and gamma globulin (gamma-G) have been tested. For example, the linear range of BSA was 0 - 0.06 microg mL(-1) with detection limits of 2.38 ng mL(-1). The method was applied to the analysis of protein in human urine and penicillin samples with satisfactory results. The relative standard deviation was in all instances less than 4.0%, and the recovery was in the range of 97.5 - 104%.     

男性型秃发患者发中K,Na,Ca,Mg元素含量分析

采用火焰原子吸收法对３０例男性型秃发患者及３８例毛发健康男性对照者发中宏量元素Ｋ、Ｎａ、Ｃａ、Ｍｇ的含量进行了测定。结果表明，男性型秃发患者发Ｋ含量明显高于对照组，具有统计学上的显著差异（Ｐ〈０．０１）。发Ｎａ、Ｃａ、Ｍｇ含量在两组间未见显著差异（Ｐ〉０．０５）。本文提示，体内某些宏量元素变化对男性型秃发可能产生一定影响。     

Powering the analytical glow discharge

The glow discharge may be powered by direct current (dc), radio frequency (rf) and pulsed discharge sources. Each has specific advantages and special features that should be considered by analysts using the various forms of glow discharge spectroscopy. This paper reviews some of the factors that contribute to the selection of a power source for the glow discharge.     

The Baylis-Hillman condensation of alpha,beta-conjugate cycloketones with aldehydes using diethylaluminum iodide alone as the promoter

The Baylis-Hillman condensation of three types of alpha,beta-conjugate cycloketones with aldehydes was successfully performed by using diethylaluminum iodide as the Lewis acid promoter alone without the direct use of a Lewis base. The reaction proceeded to completion at 0 degree C in CH2Cl2 within 24 h to give modest to good yields (53-72%).     

The Studies of Lanthanide Shift Reagents in NMR Spectroscopy

The action of a series of lanthanide chelate complexes LnL₃, where Lu=La, Pr, Nd, Sm, Eu, Dy, Ho, Er and Yb; L= dbm (dibenzoylmethanato), dpm (dipivaloylmethanato), and acac acetylactonato), on nmr spectra of 2-butanol has been studied. The origin of shifting abilities and shifting sign of various lanthanide ions are explained by means of Bleaney's theory.     

Adsorption, desorption and activities of acid phosphatase on various colloidal particles from an Ultisol

Adsorption, desorption and activity of acid phosphatase on various soil colloidal particles and pure clay minerals were studied. Higher adsorption amounts and low percentage of desorption of acid phosphatase were found on fine soil clays (<0.2 μm). Electrostatic force and ligand exchange are the major driving forces that are involved in the adsorption of enzymes on soil clays. More enzyme molecules were adsorbed on soil clays in the presence of organic components. However, enzymes on organic clays were more easily released. One-third of the enzyme on goethite was adsorbed via ligand exchange process. Some other interactions, such as van der Waals force, hydrophobic force and hydrogen bonding may be more important in the adsorption of enzyme on kaolinite and the enzyme in this system cannot be easily removed. Coarse clays (0.2–2 μm) and inorganic soil clays had higher affinities for enzyme molecules than fine clays and organic clays, respectively. The activity of enzyme bound on soil clays was inhibited and the thermal stability was increased in the presence of organic matter. Data obtained in this study are helpful for a better understanding of the interactions of enzymes with inorganic and organic constituents in soil and associated environments.